Matsui MCE61TC Manual de usuario

MCE61TC

getting to know your hob.....................................................................................3

important safety notes............................................................................................4

control panel MCE61TC.......................................................................................6

instructions for use MCE61TC.................................................................................

hints and tips ........................................................................................................ 9

installation guide...................................................................................................11

specifications........................................................................................................15

contents

getting to know your hob

Thank you for choosing a Matsui Vitroceramic Builtin Hob. We hope the following

information will help you to familiarise yourself with the features of the hob and to

use it successfully and safely.

Please read the instructions in this user guide before using the hob and keep it for

future reference.

PLEASE NOTE: The electrical connection of this hob should be carried out by a

qualified electrician, according to the instructions in this guide and in compliance with

the current regulations. Give this guide to your electrician, the connection instructions

are on page 13.

Elements

Element control and

hot surface indicators

important safety notes

We have included this section for your safety. Please read this information carefully

before using your hob.

Safety notes:

. Make sure all the packaging has been removed before you use the hob.

. Keep all packaging until you are sure that the hob is working properly.

. Retain this user guide and your receipts for future reference.

. The electrical safety of this hob is guaranteed only if it is connected to a properly

earthed system, which complies with the electrical safety standards in force. If you

cannot verify that this fundamental safety requirement is in place, consult a qualified

electrician.

. Do not put pressure on the power supply cable while fitting the hob.

. Never replace the power supply cable yourself. Damaged cables must only be

replaced by an authorised service centre.

. Adaptors, multiple sockets and/or extension leads must not be used.

. Never leave the hob unattended when cooking with fat or oil. They can rapidly catch

fire if overheated.

. This hob must only be used for the purpose of heating or cooking food, any other

use, for example heating rooms, is dangerous. The manufacturer will not be liable

for damages resulting from improper, incorrect or negligent use.

. Be careful when using small household appliances, such as irons, near the elements

and make sure the power cable is kept well away from hot surfaces.

. Make sure all the controls are in the off position when not in use.

WARNING:

. It is hazardous for anyone other than authorised service personal, to carry out

servicing or repairs which involve the removal of covers.

. To avoid the risk of an electric shock, do not attempt repairs yourself.

. In the event of any damage that occurs as a result of improper connection or

installation. The warranty will not be valid.

. Use only stable flat-based pans. They should be placed on the hob with handles

turned inwards away from the edge of the work top so that they are not accidentally

knocked or pulled over.

. Do not use flammable liquids (alcohol, petrol) near the hob when it is in use.

. When an element is turned on, a little noise may be heard and the surface will

turn red, this is normal.

. If sharp edged dishes are scraped on a surface of a Virtroceramic hob, it may

cause damage to the surface.

. Do not cut bread on the glass of the Vitroceramic hob.

. If you notice any cracks on your Vitroceramic hob surface, disconnect it from the

supply source to avoid the possibility of an electric shock.

. It is advisable to have a smoke detector fitted in your home, and have a fire blanket

or extinguisher close to the hob.

. Do not use a steam cleaner to clean your hob.

. Harsh, abrasive cleaners should not be used as they can scratch the glass surface.

. Glass panels should not be used as working surfaces.

. Any maintenance must be carried out by a qualified electrician with the mains

supply disconnected.

. To prevent misoperation of the hob, keep the control touch points clean.

important safety notes

control panel MCE61TC

Touch screen contro pane

Your hob has four elements below a ceramic glass surface. Each element is

operated by using the touch controls. When using touch controls, it is best to use

the ball of your finger rather than the tip. The hob is designed for operating at 9

different levels.

Heater

Disp ay

To se ect upper

eft e ement To se ect upper

right e ement

Decima

Point

To se ect ower

eft e ement

Decrease

Heat Setting Increase

Heat Setting To se ect ower

right e ement Key Lock

Indicator

Key

Lock On/Off

Hob with touch contro s

Using the e ements

1 Switch the hob on by touching .

2 Touch the button corresponding to the element you wish to cook on.

3 A red dot will appear beside the button that is selected. (If no element

is selected within 10 seconds the hob will automatically turn off).

4 Select the element temperature setting, using the or as required. The

element is now ready to cook on. For quickest boil times, select 9 and then

adjust down to a lower setting as required (1-9 will be displayed next to the

element selector).

Heat boost

All heaters are equipped with a heat boost function. If the heat boost is active, then

the heater will be operated with maximum power for a set period of time depending

on the selected heat setting. This is indicated through a flashing 'A' alternating with

the temperature setting level. The higher the setting the longer the heat boost. Once

the heat boost time ends only the heat setting will be indicated and the element will

cycle 'on' and 'off'.

To activate the heat boost, touch the button corresponding to the element you wish

to cook on, then by pressing ' ' , the heat boost is active. Duration of the heat

boost depends on the temperature setting level , select level 9 to 1 with heat boost.

The heat boost can be turned off by pressing ' ' until the heat setting '0' appears

or by pressing ' ' until heat setting '9' appears.

Hot hob warning indicators

When a hot hob warning indicator light is displaying H, it is indicating the cooking

zone has some residual heat and will require the minimum amount of energy to

reheat to cooking temperature.

The indicator should NOT be seen that it is safe to touch the cooking zones if the

light is not lit. Care must ALWAYS be taken before touching any cooking appliance.

instructions for use MCE61TC

Settings Use for

0 Element off

1-3 Delicate warming

4-5 Gentle simmering, slow warning

6- Reheating and rapid simmering

8 Boiling, sauté and searing

9 Maximum heat

A Heat Boost

Chi d Lock

1 To activate the child lock; first press until the buzzer beeps, then press

and simultaneously and press afterwards, L will appear in all displays

and the controls can not be changed.

2 To deactivate the child lock; first press until the buzzer beeps, then press

and simultaneously and press afterwards. L will disappear in the

displays.

3 It is only possible to activate the child lock when the hob is switched off.

instructions for use MCE61TC

Turning an e ement off

1 Select the element you want to turn off by pressing the corresponding touch

control button.

2 Using the button, turn the temperature down to 0. (Also using the and

buttons simultaneosly turns the temperature to 0).

3 To turn all of the elements off at once, touch the button.

Key Lock

If you press and hold the key symbol for 2 seconds, the controls cannot be

changed until the key symbol is pressed and held a second time. It is only possible

to switch the hob off by touching .

hints and tips

Cookware

. Use heavy gauge, flat, smooth bottomed pans that are the same diameter as the

element. This will provide good contact with the glass and help reduce cooking

times.

. Cookware with a stainless steel sandwich base or enameled cast iron base will

give you the best results.

. Never use plastic or aluminium foil dishes on the hob.

. Aluminium and copper bottomed cookware can cause a metallic residue to remain

on the hob. If left, this becomes difficult to remove. Clean the hob after every use.

Energy saving

. Using a lid will reduce cooking times.

. When liquid comes to the boil reduce the temperature setting.

. Place a pan on the element prior to turning on the heat, to retain the heat.

. Choose cookware of the proper size, material and construction as indicated

above.

. Minimise the amount of liquid or fat to reduce cooking times.

. Use residual heat retained in the glass after the element is turned off to continue

the cooking process or to keep foods warm.

. Select the proper temperature setting for the cooking task.

CORRECT FALSE FALSE

hints and tips

C eaning tips

. Do not use abrasive pads, corrosive cleaners, aerosol cleaners or sharp objects

to clean the surfaces of the hob.

. To remove burnt food, soak it off with a damp cloth and washing-up liquid.

. You may use a scraper purchased from your local market for cleaning food or

residues. Sticky foods must be cleaned immediately when they spill, before the

glass has time to cool down.

. Be careful not to scratch the silicon adhesive placed on the edges of the glass

whilst using a scraper.

. The scraper has a razor, therefore, it must be kept away from children.

. Use special ceramic hob cleaner on the hob while it is warm to touch. Rinse and

wipe dry with a clean cloth or paper towel. The hob may become stained if

cleaning residue remains.

Tabla de contenidos