Matrix SETU VG Series Manual de usuario
SETU VG
Quick Start
SETU VG
Multi-Port VoIP to GSM Gateway
Quick Start
Documentation Disclaimer
Matrix Comsec reserves the right to change, at any time, without prior notice, the product design,
specifications, components, as engineering and manufacturing may warrant.
This is a general documentation for all models/configurations of the product. The product may not
support some of the features/facilities described in this document.
While every reasonable effort has been made to ensure accuracy of content in this document,
Matrix Comsec assumes no responsibility for errors or omissions that may occur herein. No
liability is assumed for damages, costs, expenses resulting from unauthorized modifications or
repairs to the product; failure to use information or to comply with the installation, operation and
maintenance instructions contained in this document.
Copyright
All rights reserved. No part of this quick start may be copied or reproduced in any form or by any
means without the prior written consent of Matrix Comsec.
Version V1
Release date: December 28, 2016
Table of Contents i
Contents
Know Your SETU VG ..................................................................................... 1
Overview .......................................................................................................... 1
Installing SETU VG ......................................................................................... 3
Before You Start ................................................................................................ 3
Getting Started .................................................................................................. 3
Connecting SETU VG ..................................................................................... 5
Power ON SETU VG ......................................................................................... 8
Accessing Jeeves (GUI) .............................................................................. 11
Connecting a Computer .................................................................................. 11
Configuring SETU VG .................................................................................. 15
Using the Wizard ............................................................................................. 15
Using Selective Configuration ......................................................................... 16
ii Table of Contents
Matrix SETU VG Quick Start 1
Know Your SETU VG
Thank you for choosing the Matrix SETU VG. Please read the instructions in this Quick Start to
install and operate SETU VG.
This Quick Start is meant to help you install and configure the basic parameters of the system. For
Advanced configuration and feature description, please refer the SETU VG System Manual
available Online. To download, click http://www.matrixtelesol.com/technical-document.html.
Overview
SETU VG is available in two configurations:
•SETU VG8 with 9 SIP Trunks and 8 Mobile Ports.
•SETU VG4 with 9 SIP Trunks and 4 Mobile Ports.
Antenna
SIM Card Slots
Reset Button
WAN Port
LAN Port
DC Power Jack
2 Matrix SETU VG Quick Start
Ports and Connectors
LEDs
SETU VG has a Power LED (PWR), a Status LED (STS) and eight Port LEDs. By default,
• In SETU VG8, the Port LEDs M1 to M8 are assigned to Mobile Port 1 to Mobile Port 8
respectively.
• In SETU VG4, the Port LEDs M1 to M4 are assigned to Mobile Port 1 to Mobile Port 4
respectively. The LEDs M5 to M8 cannot be assigned to any port.
The LEDs indicate the status of the ports and various events occurring on the ports,
including errors.
If required, to each port LED—M1 to M8 in SETU VG8 and M1 to M4 in SETU VG4—you may re-
assign a port of your choice. To know more, see Port LED topic under Maintenance in the System
Manual.
SETU VG is easy to install and operate. The built-in web server, Jeeves, allows you to configure
the system parameters and features On-site as well as from a remote location.
Port Connector Description
SMA (Male) To connect Antenna for the Mobile Ports.
SIM Card Slots
(SIM1 to SIM8) --- To connect to GSM/UMTS networka.
a. When the 3G module is installed in the system, you must disable Call Waiting on the SIM before insert-
ing it into the system to prevent current calls from being disconnected.
Reset Button --- To restart the system or to restore the default LAN IP Address.
WAN Port RJ45 To connect to the IP network over a DSL Modem or Router or a
LAN Switch.
LAN Port RJ45 To connect a computer or a LAN Switch.
12VDC-2A DC Jack To connect 12VDC, 2A Power Adapter.
Matrix SETU VG Quick Start 3
Installing SETU VG
Before You Start
Before you begin to install and set up the hardware of SETU VG, make sure you have the following
ready:
• A suitable location to install SETU VG.
•Powersupply.
• A SIP Account from an ITSP to test VoIP connectivity.
• A standalone computer or a computer connected in a LAN to access Jeeves, the web-based
configuration tool of SETU VG.
• Appropriate cables and connectors to set up and test the WAN interface of SETU VG and the
LAN connection.
• A SIM Card to test Mobile connectivity.
• Do not install this product near any area where,
• it is exposed to direct sunlight, heat, excessive cold or humidity, dust, oil, corrosive fumes.
• there is a water source (wash basin, tub, shower, pool, sprinkler, etc.)
• there is source of electromagnetic noise such as radio equipment, heavy transformers, faulty electric
chokes of tube-lights, device having a faulty coil.
• Ensure proper electrical earth and telecom earth for the safety of the product and persons handling it.
• Always wear an electro static discharge preventive wrist wrap or belt and use a grounding mat when handling
the product and its parts.
• SETU VG contains a 3VDC/18mAh (Li-Al) alloy-Manganese Dioxide Coin Battery (ML 1220 - Rechargeable)
of diameter 12.5mm and height 2.0mm. Battery should be replaced only by authorized dealers of Matrix.
There is a risk of explosion if the Battery is replaced in an incorrect manner. Please dispose-off used
Batteries.
Getting Started
• Select an appropriate site to install the SETU VG, considering the safety precautions listed
earlier in this chapter.
• Unpack SETU VG and verify the package contents. The Package of SETU VG8 contains:
•SETUVGUnit
• Power Adapter - 12VDC, 2A (Country Specific)
• Universal Converter Plug 2 PIN
• Interchangeable Plug EU
•Two
1GSM Antenna with SMA Connector
4 Matrix SETU VG Quick Start
• Ethernet Cable (RJ45)
• Two M7/30 Screws with grips
• Wall Mounting Template
• A Warranty Card set
• SETU VG Quick Start (printed copy)
If any of these items is missing or damaged, please contact the dealer/reseller from whom
you purchased the system.
• Place the system at the selected site.
If you are mounting the system on a wall, refer to the mechanical dimensions of the product
and use the mounting template for drilling holes on the wall.
1. The Package of SETU VG4 contains only one GSM Antenna with SMA Connector.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
