Matrix Switch Corporation MSC-CP16X4E Manual de usuario

Matrix Switch Corporation

MSC-CP16X4E

Product Manual

1RU 16x4 Remote Elastomeric Button Panel

Re ision 1.2

MSC-CP16X4E Product Manual

Legal Disclaimers

All material in this document is the legal property of Matrix Switch Corporation.

Information contained in this publication regarding device applications and the like is

provided for your convenience only and may be superseded by updates. It is your

responsibility to ensure that your application meets with your specications. MA RIX

SWI CH CORPORA ION MAKES NO REPRESEN A IONS OR WARRAN IES OF ANY

KIND WHE HER EXPRESS OR IMPLIED, WRI EN OR ORAL, S A U ORY OR

O HERWISE, RELA ED O HE INFORMA ION, INCLUDING BU NO LIMI ED O

I S CONDI ION, QUALI Y, PERFORMANCE, MERCHAN ABILI Y OR FI NESS FOR

PURPOSE. Matrix Switch Corporation disclaims all liability arising from this

information and its use. Use of Matrix Switch Corporation devices in life support and/or

safety applications is entirely at the buyer’s risk, and the buyer agrees to defend,

indemnify and hold harmless Matrix Switch Corporation from any and all damages,

claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly

or otherwise, under any Matrix Switch Corporation intellectual property rights.

Contacting Matrix Switch Corporation

Website http://www.matrix-switch.tv

Phone (530) 477-9122

Email [email protected]

MSC-CP16X4E Product Manual

Publication History

Revision & Date Changes

Revision 1.2

2015-08-20

•Added protocol commands: MtxGroup, PanelDis, PanelExtEn, and

Sierra.

•Updated Mascot protocol information to version 2.4.

•New manuals for MSC-V1616(LS)(+DC), MSC-1HD1616(LS)(+DC)

Revision 1.1

2014-06-24

•Updated External Button Control Pinout section.

•Added External Button Control information for MSC-HD42L.

2014-03-17 •Fixed some document cross references.

•Minor text content and gure position changes.

2013-11-29 •MSC-4HDX6464 manual released.

•Updated Mascot protocol information to version 2.3.

•Added Vars Mascot command description.

Revision 1.0

2013-04-15

•Initial release of modular product manual.

MSC-CP16X4E Product Manual

Table of Contents

1 Getting Started....................................................................................................................................................7

1.1 Device Connections......................................................................................................................................7

1.2 Powering p The Device..............................................................................................................................7

1.3 Front Panel Button Interface.........................................................................................................................7

1.3.1 Audio Breakaway..................................................................................................................................7

1.4 Web Page Interface........................................................................................................................................8

1.4.1 Accessing The Web Page Interface........................................................................................................8

1.4.2 Network Settings...................................................................................................................................8

1.4.3 Panel Remote Router IP Address...........................................................................................................8

1.5 Network Planning..........................................................................................................................................9

1.5.1 Installation Example............................................................................................................................10

1.6 Advanced Panel Configuration...................................................................................................................10

2 Web page interface............................................................................................................................................11

2.1 Overview.....................................................................................................................................................11

2.2 Config Tab...................................................................................................................................................11

2.2.1 System Settings...................................................................................................................................12

2.2.2 Network Settings.................................................................................................................................12

2.2.3 Button Panel Settings..........................................................................................................................13

2.3 Command Tab.............................................................................................................................................13

3 Mascot Control Protocol..................................................................................................................................15

3.1 Protocol changes.........................................................................................................................................15

3.2 Telnet access................................................................................................................................................16

3.3 Command format........................................................................................................................................16

3.3.1 Command names.................................................................................................................................16

3.3.2 Command arguments...........................................................................................................................17

3.4 Response format..........................................................................................................................................17

3.5 Command argument values.........................................................................................................................17

3.6 Error codes..................................................................................................................................................18

3.7 Basic command reference...........................................................................................................................18

3.8 Advanced command reference....................................................................................................................19

3.9 B Command................................................................................................................................................20

3.10 C Command..............................................................................................................................................20

3.11 DestNames Command...............................................................................................................................21

3.12 DHCP Command.......................................................................................................................................21

3.13 E Command...............................................................................................................................................22

3.14 Firmware Command..................................................................................................................................22

3.15 FrameIP Command...................................................................................................................................23

3.16 Gateway Command...................................................................................................................................23

3.17 Help Command.........................................................................................................................................23

3.18 IP Command..............................................................................................................................................23

3.19 LockStatus Command...............................................................................................................................24

3.20 MAC Command........................................................................................................................................24

3.21 MascotVer Command................................................................................................................................24

MSC-CP16X4E Product Manual

3.22 MtxCfg Command....................................................................................................................................25

3.23 MtxGroup Command................................................................................................................................27

3.24 NetMask Command..................................................................................................................................28

3.25 P Command...............................................................................................................................................28

3.26 PAdd Command........................................................................................................................................28

3.27 PairIO Command......................................................................................................................................29

3.28 PanelOfs Command..................................................................................................................................29

3.29 PanelDis Command...................................................................................................................................30

3.30 PanelExtEn Command..............................................................................................................................31

3.31 PanelRate Command.................................................................................................................................31

3.32 PClr Command..........................................................................................................................................31

3.33 PsetNames Command...............................................................................................................................32

3.34 PSub Command.........................................................................................................................................32

3.35 PView Command......................................................................................................................................33

3.36 Reboot Command......................................................................................................................................33

3.37 ReclkDis Command..................................................................................................................................33

3.38 RemoteSync Command.............................................................................................................................34

3.39 S Command...............................................................................................................................................34

3.40 Sierra Command........................................................................................................................................35

3.41 SrcNames Command.................................................................................................................................35

3.42 SysName Command..................................................................................................................................36

3.43 SysType Command...................................................................................................................................36

3.44 Vars Command..........................................................................................................................................37

3.45 W Command.............................................................................................................................................38

3.46 WebPass Command...................................................................................................................................38

3.47 X Command..............................................................................................................................................38

4 Software Updates..............................................................................................................................................40

4.1 Software pdate on Carina Series Devices................................................................................................40

4.1.1 Software pdate Requirements...........................................................................................................40

4.1.2 Power on Software pdate..................................................................................................................40

4.1.3 Command Software pdate................................................................................................................41

4.2 TFTP Software............................................................................................................................................42

4.2.1 Windows XP........................................................................................................................................42

4.2.2 Windows Vista and Windows 7...........................................................................................................42

4.2.3 Mac OSX.............................................................................................................................................42

4.2.4 Linux....................................................................................................................................................43

4.3 Software pdate Errata...............................................................................................................................44

4.3.1 pgrading from version 4.x.x or older firmware................................................................................44

4.3.2 Downgrading from version 5.4.0 to a previous version......................................................................45

5 Troubleshooting.................................................................................................................................................46

5.1 nknown IP address....................................................................................................................................46

5.2 No Ethernet link when connected to network switch..................................................................................46

5.3 nexpected reboots.....................................................................................................................................46

6 Reference...........................................................................................................................................................47

6.1 Glossary.......................................................................................................................................................47

MSC-CP16X4E Product Manual

7 Matrix Switch Corporation Warranty............................................................................................................48

MSC-CP16X4E Product Manual

1 Getting Started

Congratulations on your purchase of a quality Matrix Switch Corporation product. This section contains a

general overview of device functionality and provides information to get you up and running quickly.

Additional sections in this manual can be consulted for more detailed information on the subsystems and

features of this product.

1.1 Device Connections

The MSC-CP16X4E comes with a power supply adapter and a documentation CD. Additional cables and

hardware are not usually provided.

•Power supply adapter – A 5 Volt 2 Amp power supply adapter is provided which is connected to the

5.5mm OD 2.5mm ID coaxial connector on the device and plugged into a 100-240V 50/60Hz AC power

source.

•Ethernet connector – Connect to a network switch with an Ethernet cable. Required for controlling a

remote router, accessing the web page interface and using the TCP/IP Mascot interface. A crossover

cable can also be utilized for connecting directly to a computer (for configuration purposes) or the router

to control.

1.2 Powering p The Device

This device is not equipped with a power switch and is simply connected to the power supply adapter which is

plugged into a suitable AC power source, to power it up.

Once the device is powered it goes through the following startup sequence:

•5 second startup delay to allow for Power On Software pdates.

•The remote panel will attempt to connect to the IP address assigned to the Remote Router IP Address

setting, the panel button LEDs will cycle until a connection is established.

•The button control panel is initialized and buttons are illuminated to show the initial routing status.

1.3 Front Panel Button Interface

The MSC-CP16X4E is a 16x4 remote button panel for controlling and viewing status of a router.

This panel interface provides separate input and output buttons. One output button is active at a time, indicated

by it being lit. The current connection status for the active output is indicated by the relevant numbered input

button being lit. Pressing an input button will cause that input to be connected to the current active output.

1.3.1 Audio Breakaway

This panel interface has dedicated Video and Audio toggle buttons. When both Video and Audio buttons are not

lit, the panel is in audio follows video mode, where both video and audio levels are switched. To make routing

changes to video only, toggle the Video button on, select the desired output by pressing its output button and

then press the desired input button. The same procedure can be used to switch audio only by toggling the Audio

button on. To return to "audio follows video" mode, toggle the applicable Video or Audio button off by pressing

it.

MSC-CP16X4E Product Manual

1.4 Web Page Interface

All Matrix Switch Corporation router and panel devices come with a built-in web page interface.

This interface is used for configuring this panel device.

Devices come factory configured with default settings, unless a pre-configuration request is made during

purchase, an example being a multi device application.

1.4.1 Accessing The Web Page Interface

The default network IP address for this device is 192.168.2.64. Refer to the table below for the default IP

addresses for other types of Matrix Switch Corporation devices.

De ice Type Default IP Address

Video/Audio Routers 192.168.2.60

Remote Button Panels 192.168.2.64

Remote LCD Screen Panels 192.168.2.80

To access the web page interface of the device:

1. Connect the Ethernet port of a computer either directly to the device using a crossover cable or to the

same Ethernet network through a network switch or other LAN infrastructure.

2. Manually configure the computer's IP address to be a unique address on the same IP subnet as the

device. For example 192.168.2.10. The Netmask should be 255.255.255.0. The Gateway doesn't

matter for this purpose, but could be set to 192.168.2.1.

3. Make sure the device is powered on.

4. sing a web browser on the computer, enter the device's IP address into the Location bar and press

ENTER. The web page interface should load. If the web page interface fails to load, double check the

computer's network settings and physical Ethernet connections. In the event that the IP address of the

device is unknown, refer to the nknown IP Address troubleshooting section.

1.4.2 Network Settings

Network settings can be changed on the Config tab of the Web Page Interface. This includes DHCP enable, IP

address, Netmask and Gateway settings. DHCP should only be used for assigning specific network settings

from a central DHCP server or when assigned IP addresses can be determined, otherwise configuring the device

via its IP address would be prevented if the IP address is unknown. After changing network settings, click the

Save button and then click the Reboot button to restart the device. Refer to the Config Tab - Network Settings

section for more details.

In the event that the device's IP address is unknown, refer to the nknown IP Address troubleshooting section.

Refer to the Network Planning section for assistance with developing a network plan for multi-device

applications.

1.4.3 Panel Remote Router IP Address

Remote panels control Matrix Switch Corporation video/audio routers with the TCP/IP protocol via the Ethernet

port.

MSC-CP16X4E Product Manual

The Remote Router IP setting on the Config Tab of the Web Page Interface defines the IP address of the

remote router which the panel interface will control. This defaults to 192.168.2.60 on remote panels, which is

the default IP address of Matrix Switch Corporation routers.

After changing the Remote Router IP setting click the Sa e button to store the changes, which take effect

immediately (a reboot is not required).

Refer to the Config Tab - Button Panel Settings section for more details on configuring the Remote Router IP

Address.

Refer to the Network Planning section for more details on configuring devices in multi-device applications.

1.5 Network Planning

The default device settings can be used without change in applications with a single router and optionally one

remote panel on the same Ethernet network. Larger installations or integration with existing IP LAN networks

require some network planning.

NOTE: Matrix Switch Corporation can assist in planning and pre-configuring devices for specific application

requirements at purchase time. Just ask a sales or customer service representative.

Manual IP address management is recommended, although a DHCP server can be a convenient option for

centrally managing IP addresses by device MAC address, the net effect still being a fixed IP for each device.

Consult your DHCP server documentation for information on assigning IP addresses by MAC address, if this

option is chosen.

All devices which need to communicate with one another (routers, remote panels and computers) need to be

physically connected to the same LAN or allow IP packet routing between networks if on separate LANs.

SECURITY WARNING: Matrix Switch Corporation devices are meant for installation in trusted LAN

environments. In the event that remote device configuration or control is desired over public networks or the

Internet, it is strongly recommended that some form of inter-network security is utilized, such as firewalls and

encrypted VLAN or secure data tunnels. This is necessary to prevent undesired access to devices.

Devices on the same LAN need to be assigned unique IP addresses in the same IP subnet. Matrix Switch

Corporation devices are configured by default to use IP addresses in the class C IP subnet 192.168.2.x. When

integrating devices into an existing LAN network, unique IP addresses should be assigned from the applicable

network and the Netmask setting of the devices should be set to reflect the class (size) of the IP network (the

default of 255.255.255.0 is for class C, which accommodates up to 254 addresses).

The Gateway setting is required to be set to the IP address of the network gateway on remote panels which will

be accessing routers across network subnets, but this setting is otherwise not needed.

After assigning device network settings, including unique IP addresses, remote panels need to be assigned the

correct IP addresses to their Remote Router IP setting of the router they will control.

Additional configuration changes may be required, depending on the application and are described in

subsequent sections.

MSC-CP16X4E Product Manual

1.5.1 Installation Example

The following diagram is of a simple installation example consisting of a 32x32 SDI Video Router, with a

secondary level 32x32 Analog Audio router connected via the AFV DB-25 interface, a 32x32 Remote Button

Panel, a 2R LCD Remote Panel and a Computer system.

1.6 Advanced Panel Configuration

Button panel interfaces (on local and remote panels) can be configured to control a subset of destinations,

sources and/or levels.

Example use scenarios

•tilize an 8x1 remote panel to control a single destination of an 8x8 video router.

•se the local panel of a 16x16 two level Video and Audio router to control Video only and an additional

16x16 remote panel to control Audio independently.

•se a 4x4 panel to independently control 4 destinations of an 8x8 router and limit selectable sources to 4

sources.

The applicable settings for advanced panel control scenarios can be found on the Config Tab of the Web Page

Interface. Refer to that section for additional details.

Otros manuales para MSC-CP16X4E

Tabla de contenidos

Otros manuales de Hardware de red de Matrix Switch Corporation

Matrix Switch Corporation

Matrix Switch Corporation MSC-5-1664 Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD44AAL Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-HDX4000 Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD2424L Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD3224L Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161AAS Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD121AAL Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-CP32X32E Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD3224S Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD2424S Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD88AAS Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD2432L Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD44DES Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-CP4X4E Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD3208S Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD81AAS Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-CP59X59E Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD3232L Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-CP8X1E Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD84DEL Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD3208L Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD121DEL Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD121DES Manual de usuario

Matrix Switch Corporation

Matrix Switch Corporation MSC-2HD3216L Manual de usuario

Manuales populares de Hardware de red de otras marcas

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario

Lanner

Lanner NCA-1525 Manual de usuario