Matco Tools MST5907 Manual de usuario

MST5907

WARNING:

Read all instructions and warnings before using this product. Failure to do so can

lead to damage to the tool, personal injury, or possibly death.

WARNINGS:

• DO NOT USE WITH AN IMPACT WRENCH LARGERTHAN 1/2” DRIVE.

Doing so will void the product warranty immediately.

• Hammering on this tool will void the product warranty.

• Always be aware of your surroundings when using this tool.

• Always be sure to inspect the tool for damage or signs of stress before

each use.

• Only use when you have equipped yourself with proper safety gear.This

pertains to the user and others in the same area of operation.

• Be sure to keep any loose items away from the tool during use, including but

not limited to jewelry and clothing.

• Do not use this tool confined or unclean areas.

• Keep tool lubricated, especially where the force screw rotates in the puller

cup.Recommended lubricants are SAE 30 and EP moly grease.

www.matcotools.com

MST5907

INSTRUCTIONS:

1. Remove bearing cup bolts and bolt keepers

2. Adjust the puller cup to allow it to accept the yoke.

3. Turn the center screw assembly until the is against the yoke (reverse thread).

4. Use a ratchet or either 3/8” or 1/2” (no larger) impact wrench release the

bearing cup.

5. Once the first bearing cup has been fully extracted, rotate the driveshaft and

repeat steps 2 through 4.

www.matcotools.com

Item Part Number Description

1 907-1 Puller Frame

2 907-2 Puller Cup

3 907-3 Center Screw Assembly

4 907-4 Cup Plug

5 N/A Retainer Ring

1

2

3

4

5

Tabla de contenidos

Otros manuales de Herramientas de Matco Tools

Matco Tools

Matco Tools MT1827A Manual de usuario

Matco Tools

Matco Tools MTCPUBSTOOL Manual de usuario

Matco Tools

Matco Tools TSB700A Manual de usuario

Matco Tools

Matco Tools RL900A Manual de usuario

Matco Tools

Matco Tools MT1811 Manual de usuario

Matco Tools

Matco Tools MWL900L Manual de usuario

Matco Tools

Matco Tools GG50B Manual de usuario

Matco Tools

Matco Tools HG10S Manual de usuario

Matco Tools

Matco Tools MST75B Manual de usuario

Matco Tools

Matco Tools MT3850HRA Manual de usuario

Matco Tools

Matco Tools SMCFSM10 Manual de usuario

Matco Tools

Matco Tools MT2816 Manual de usuario

Matco Tools

Matco Tools MT2875R Manual de usuario

Matco Tools

Matco Tools SILVER EAGLE SE916 Manual de usuario

Matco Tools

Matco Tools MT1815 Manual de usuario

Matco Tools

Matco Tools MT2812 Manual de usuario

Matco Tools

Matco Tools MST7899 Manual de usuario

Matco Tools

Matco Tools BRK4TA Manual del producto

Matco Tools

Matco Tools BRK10T Instrucciones de uso

Matco Tools

Matco Tools GG-60 Manual del producto

Matco Tools

Matco Tools MBP1000 Manual de usuario

Matco Tools

Matco Tools SS3K Manual de usuario

Matco Tools

Matco Tools MUC122SP Manual de usuario

Matco Tools

Matco Tools MJS5000 Manual de usuario

Manuales populares de Herramientas de otras marcas

Martor

Martor SECUNORM 175 Manual de usuario

ERKCO

ERKCO 1000 Manual de usuario

jbc

jbc N4473 Manual de usuario

FEINMETALL

FEINMETALL FZWZ-SET-001 Manual de usuario

Worx Professional

Worx Professional Sonicrafter WU676 Manual de usuario

Gage Bilt

Gage Bilt GB713SH Manual de usuario

Hilti

Hilti DX 9-ENP Manual de usuario

norbar

norbar NORTRONIC 34399 Manual de usuario

BGS technic

BGS technic 8578 Manual de usuario

Makita

Makita DHR241 Manual de usuario

Motor Guard

Motor Guard JMB-1250 Manual de usuario

Power Adhesives

Power Adhesives 805-12 Manual de usuario

Clemco

Clemco 24189 Manual de usuario

VVG

VVG VNG 903 Series Manual de usuario

Hilti

Hilti FX 3-A Manual de usuario

Grizzly

Grizzly H6472 Manual de usuario

axing

axing BWZ 5-02 Manual de usuario

Dh-Robotics

Dh-Robotics RGI-100 Cómo utilizar