Master equipment TP2402 Manual de usuario
TP2402 • Master Equipment
FlashDry Control Stand Dryer
Assembly Instructions
Parts List
(A) Base Bars with Wheels (2)
(B) Large Round Washer Plate (1)
(C) Lock Washer (1)
(D) Twist Bolt (1)
(E) Bottom Pole (1)
(F) Top Pole (1)
(G) Dryer Body (1)
(H) Rounded Screws with Rubber Feet (4)
(I) Hose (1)
(J) Concentrator Nozzles (2)
(K) Hands-Free Nozzle (1)
Tools Required (Not Included):
Wrench
Phillips Screwdriver
A
B
C
D
E
F
I
J
K
G
H
1). Assemble the base by interlocking the two base bars (A).
4. Screw the bottom pole (E) onto the large twist bolt. The
end of the bottom pole with the large flat round plate is
the end that screws onto the base.
5. Use a wrench (not included) to tighten the large twist bolt.
2. Holding the two interlocked base bars together, carefully turn base upside down. Place the large round
washer plate (B) at the intersection of the two base bars, aligning the holes. Next, place the lock
washer (C) on the twist bolt (D). Insert the large twist bolt into the aligned holes.
3. Holding the base bars together, turn the base rightside up. Be sure the large
twist bolt is visible.
6. Insert the top pole (F) into the bottom pole. Secure the two poles together at
desired height by tightening the knob on the side of the bottom pole.
7. Attach the dryer body (G) to the metal frame on the top
pole using the four rounded screws with rubber feet (H).
Use a Phillips screwdriver to tighten the screws.
8. Attach the hose (I) to the dryer by pulling the plastic neck clasp away from the hose and pressing
the hose firmly against the dryer body. Then release the plastic neck clasp.
9. The concentrator nozzles (J) fit directly onto the end of the hose.
10. To use the hands-free nozzle (K), remove the hose
and attach the hands-free nozzle by using the
plastic neck clasp as shown in step 8.
TP2402 • Master Equipment
FlashDry Control Stand Dryer
Assembly Instructions
1. Increase Fan Speed 2. Increase Temperature
4. Decrease Temperature
3. Cumulative Hours of
Operation Indicator
5. Power switch
6. Temperature
Indicator for
dryer
7. Decrease
Fan Speed
1. Simultaneously hold down buttons 1 and 2 until the Cumulative Hours of Operation
Indicator begins to flash.
2. Within 3 seconds, simultaneously hold down buttons 1 and 7 to reset the
Cumulative Hours of Operation Indicator.
3. Once the Cumulative Hours of Operation Indicator has returned to zero, release
buttons 1 and 7.
Instructions on how to reset hours of operation
LCD control panel instructions
Otros manuales de Secadora de Master equipment
Manuales populares de Secadora de otras marcas
Indesit
Indesit IDV 75 Manual de usuario
Infiniton
Infiniton SD-DG85C Manual de usuario
BOMANN
BOMANN WT 5019 Manual de usuario
Alliance Laundry Systems
Alliance Laundry Systems TMB795C Manual de usuario
Asko
Asko T793C Manual de usuario
Kenmore
Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer Manual de usuario