Mastech MS5902RTB Manual de usuario

MS5902RTB

Circuit Breaker Finder

Sock et Tester Instruction

HYS006750

MS5902R

Test Socket

Keep the pillar at right on the MS5902-T.

Please contradistinguish nameplate on the MS5902-T.

The task of Circuit Breaker Finder/Socket Tester (MS5902)

is finds correct breaker or fuse and test socket.

You will have annoyance no more for locating the correct

circuit breaker supplying power to an AC outlet or lighting

fixture.

Features:

• Automatically and quickly finds correct breaker or fuse.

• Quickly and easy identifies conditions of circuit socket.

• MS5902-T× Works on 220V AC,

MS5902-TB Works on 110V AC

• Operating temperature: 0 ~ 50°C

WARNING: Please caution extremely when use the MS5902

in the gigantic circuit breaker ark. Don't use when voltage

more than 120V/230V AC. You can turn on the flashlight in

the dark surroundings.

Operation: Locating a Circuit Breaker or Fuse

• Keep the pillar at left on the MS5902-T

• Plug the MS5902-T into the receptacle. if there is a

candescent light fixture, please install a socket adapter

before make sure the switch is OFF. then plug the MS5902-T

into the socket adapter,turn the switch on at one time.

(Socket adapter need purchase additional)

• Go to the circuit breaker panel box.

• Turn the MS5902-R on,the red LED is light.

• Place the chapiter of the MS5902-R directly onto the circuit

breaker or fuse.

• Slide the chapiter of the MS5902-R down each breaker

along both sides of the panel . Then the MS5902-R will

beep frequently as it denote the relative signal strength.

• Move the MS5902-R down each breaker once more.

On the third pass, the MS5902-R will beep ,the red LED

will quench and the green LED will light only at the circuit

Breaker powering the MS5902-T.

• Push the breaker off and check that the LED on the

MS5902-T in the outlet is off to confirm you have found the

correct breaker or buse.

Maintenance:

• Keep clean with a dry cloth.

• When the yellow LED is light on the MS5902-R,

please unscrew and

• remove cover, insert new 9V battery so as to

the MS5902-R is well-balanced.

Este manual sirve para los siguientes modelos

Otros manuales de Equipo de prueba de Mastech

Mastech

Mastech MS5910 Manual de usuario

Mastech

Mastech MS8910A Manual de usuario

Mastech

Mastech MS2302 Manual de usuario

Mastech

Mastech MS2301 Manual de usuario

Mastech

Mastech MS7220 Manual de usuario

Mastech

Mastech MS8910 Manual de usuario

Mastech

Mastech MS8910 Manual de usuario

Mastech

Mastech MS2601 Manual de usuario

Mastech

Mastech MS6813 Manual de usuario

Mastech

Mastech MS6810 Manual de usuario

Mastech

Mastech MS7222 Manual de usuario

Mastech

Mastech MS2309 Manual de usuario

Mastech

Mastech MS5215 Manual de usuario

Mastech

Mastech KPS-TL300 Manual de usuario

Mastech

Mastech MS8922H Manual de usuario

Mastech

Mastech Analog Earth Resistance Tester Manual de usuario

Mastech

Mastech ms5908 Manual de usuario

Manuales populares de Equipo de prueba de otras marcas

SMART

SMART KANAAD SBT XTREME 3G Series Manual de usuario

Agilent Technologies

Agilent Technologies BERT Serial Manual de usuario

Agilent Technologies

Agilent Technologies N3280A Manual de usuario

Vernier

Vernier Go Direct Voltage Manual de usuario

Lifeloc

Lifeloc R.A.D.A.R. Manual de usuario

Fluke

Fluke T5-600 Instrucciones de funcionamiento e instalación

Mercury

Mercury TSL01 Manual de usuario

MAHA

MAHA MBT Series Manual de usuario

Fuji Electric

Fuji Electric P-61 Manual de usuario

ETC

ETC SealerAtor Manual de usuario

Skyfine

Skyfine ETHYWAY V2 Manual de usuario

Appion

Appion G5 Twin Manual de usuario

PCB Piezotronics

PCB Piezotronics 8159-0112A Manual de usuario

BW Technologies

BW Technologies MicroDock II Manual de usuario

Sun Nuclear

Sun Nuclear 1027 Manual de usuario

Biomark

Biomark HPR LITE READER Manual de usuario

Hioki

Hioki 3169-20 Manual de usuario

Ashcroft

Ashcroft ATE-100 Manual de usuario