
USING YOUR BEER DISPENSER
Polished stainless steel tower with clear beer line (single
RUGRXEOHGLVSHQVH
Tower Gasket
Phillips oval head screws
.QREIRU7RZHU)DXFHW+DQGOH
.HJFRXSOHUV
CO2UHJXODWRUZLWKUHGJDVOLQHVDWWDFKHG
Empty 5 pound CO2tank
3ODVWLFFODPSVODUJHDQGVPDOO
Faucet wrench
Tools required for installation:
Flat bladed screwdriver
Phillips screwdriver
Pliers
Adjustable wrench or a 11»8" open end wrench
1»2" open end wrench
Barrel Sizes
1/6 barrel 1/4 Barrel 1/2 Barrel
Height 235»16"
FP
1413»16"
FP
235»16"
FP
Diameter 91»4"
FP
17"
FP
17" to 171»4"
WRFP
Gallons 5.23 7.75 15.5
#12 ounce
Glasses 53 82 163
This beer dispensing unit will support one half (1»2EDUUHO
or one quarter (1»4EDUUHO7KHGRXEOHGUDIWWRZHUXQLWVFDQ
support two sixth (1»6EDUUHOVRIEHHU6HHFKDUWEHORZIRU
quantity of beer in each barrel size.
Keg Size #of kegs per
5 pound CO2 Tank
5 gallon Corny 15 to 22
1/6 barrel 14 to 21
1/4 Barrel 10 to 14
1/2 Barrel 5 to 7
CO2FDQEHGDQJHURXV,ILWEHFRPHVGLI¿FXOWWR
breathe and/or your head starts to ache, a high
concentration of carbon dioxide may be present.
Leave the area immediately.
• The CO2 tank must always be connected to the
regulator. Never connect the tank to the keg.
• The CO2tank must be securely mounted in the
upright position. Secure it with the chain pro-
vided.
• Never drop or throw the CO2tank.
• Keep the CO2tank away from heat.
• Ventilate the area after a CO2leak.
!WARNING
1. Remove shelving and packaged components from
the interior of the refrigerator before beginning the
assembly process.
2. Take your empty 5 pound CO2tank to your local gas
VXSSO\GHDOHUWREH¿OOHG<RXFDQXVXDOO\¿QGWKHPLQ
your "yellow pages" under "Welding Supply" or "Fire
Protection". One 5 pound tank can process many kegs
VHHWDEOH'
3. Tower Mounting: DO NOT REMOVE INSULATION
INSIDE OF STAINLESS STEEL TOWER. INSULATION
KEEPS BEER IN CLEAR LINE COLD AND FRESH.
Mounting Tower to Refrigerator Top: Remove the
foam plug from the porthole and DO NOT reseal.
&OHDUDQFHLQSRUWKROHLVQHFHVVDU\IRUFROGDLUWRÀRZ
into the tower and keep the beer line cold.
Mounting Tower to Counter Top: Remove the foam
plug from the porthole and use to "bridge" the gap
between the top of the cabinet and the underside of the
FRXQWHU/HDYHDGHTXDWHFOHDUDQFHIRUFROGDLUWRÀRZ
into the tower and keep the beer line cold.
!CAUTION
Tap Equipment and Assembly
Your dispensing kit includes the following parts:
8