Marv MW10EU1 Manual de usuario
Read this manual first.
Please read this manual before operating this product.
After you finish reading this manual, store it in a safe place for future reference.
User's Manual
MARV User Manual
2
Contents
Using Safe Mode 22
How to turn off [Safe Mode] at the
machine
How to turn [Safe Mode] OFF → ON
at the machine
Handling an Object after Printing 23
Removing the object from the
print bed
Removing the raft and support
structures (if necessary)
Using the MARV Software 24
Main screen
Editing functions
Settings
MARV Maintenance 29
Replacing a Filament 29
Replacing the Filament
while Printing 30
Calibrating the Nozzle 31
Cleaning the machine 32
Cleaning the Nozzle 32
Cleaning method 1: Cleaning the
nozzle via a computer software.
Cleaning method 2: Cleaning the
nozzle without a computer software.
Updating the Firmware 34
Specications 37
Troubleshooting 38
The Machine Does Not Turn On 38
The Software Will Not Install 38
A File Cannot Be Located after
an SD Card Is Inserted 39
Files Will Not Print 40
The Printer Is Not Working 40
Printing Quality Is Not Satisfactory 41
The Filament Does Not
Extrude During Printing 44
The Printed Object Cannot Be
Removed from the Print Bed 44
How to use the manual 3
Symbols used in the manual 3
Legal Notices 4
Model Names 4
Disclaimers 4
Copyright 4
Trademarks 4
FCC (Federal Communications
Commission) 5
FCC WARNING 5
AC Adapter 6
Important safety instructions 7
Supplied Accessories 8
Machine and Installation
Information 9
Installation Space 9
Names of parts 10
Exterior
Interior
Removing the Packing Materials 12
Installing the Software and
Connecting the USB Cable 13
Basic Operation 14
Filament Installation 14
Print Bed Preparation 18
Connecting Power 19
Printing from the Computer 20
Printing from the SD Card 21
Canceling Printing 22
MARV User Manual
3
How to use the manual
Symbols used in the manual
Caution
Caution indicates a potentially hazardous situation that may result in injury to the user
of the machine or others, or the loss of property.
Note
Notes indicate useful tips or additional information for procedures and product use.
[ ]
This symbol represents control buttons on the computer screen and the machine.
e.g., [Import], [OK]
MARV User Manual
4
Legal Notices
Model Names
MARV: MW10EU1, MW10EU2, MW10EU3, MW10EU4, MW10EU5, MW10U1, MW10U2
Disclaimers
The content of the manual is subject to change without prior notice.
CANON KOREA BUSINESS SOLUTIONS INC. MAKES NO WARRANTY OF ANY KIND
WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS
PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS
TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOS OF
USE OR NON-INFRINGEMENT. CANON KOREA BUSINESS SOLUTIONS INC. SHALL
NOT BE LIABLE FOR ANY DIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR
LOSSES, ARISING FROM OR RELATED TO YOUR USE OF THIS MANUAL.
Copyright
No part of this manual may be reproduced, transmitted, or duplicated in any form or by any
means electronic, mechanical, magnetic, optical, chemical, manual or otherwise, be stored
in a retrieval system, or converted into any computer languages without written permission
from Canon Korea Business Solutions INC.
Trademarks
Microsoft, Windows, Windows XP, Windows 7, Windows 8 and Windows 8.1 are either
registered trademarks or trademarks of Microsoft Corporation in the United States and/or
other countries.
All other brand and product names are trademarks, registered trademarks, or service
marks of their respective companies.
MARV User Manual
5
FCC (Federal Communications Commission)
MARV: MW10U1, MW10U2
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may
cause undesired operation.
FCC WARNING
Changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of the FCC
Rules. Do not make any changes or modi cations to the equipment unless otherwise speci
ed in this manual. If you make such changes or modi cations, you could be required to stop
operation of the equipment.
CANON KOREA BUSINESS SOLUTIONS INC.
607, Teheran-ro, Gangnam-gu, Seoul, Korea
TEL No.1588-2500
Note
• This equipment complies with the Canadian ICES-003 Class B limits.
• Respecte les limites de la classe B de la NMB-003 du Canada.
MARV User Manual
6
AC Adapter
• Connect only to a power outlet of the rated voltage and power supply frequency
(50/60 Hz depending on your region).
• Do not connect other electrical equipment to the same power outlet to which printer is
connected. Also, when using an extension cord, make sure that the extension cord is
rated for the current requirements of the printer.
• Never disassemble or modify the AC adapter, as it is dangerous.
• The power cord may become damaged if it is often stepped on or if heavy objects are
placed on it. Continued use of a damaged power cord and AC adapter can lead to an
accident, such as a re or electrical shock.
• Do not use the power cord while it is coiled.
• Do not pull directly on the power cord. When disconnecting the power cord, grasp the
plug and remove it from the outlet.
• Keep the area around the power cord clear of objects so that the power cord can be
disconnected easily in an emergency.
• Do not use an AC adapter other than the one provided with the printer.
Do not use the AC adapter provided with the printer with other products.
• If you have any questions regarding the power supply, contact your local authorized or
service representative for further information.
MARV User Manual
7
Important safety instructions
Please read this entire section before using the machine. These instructions are
intended to prevent any potential damage to the machine and injury to the user
or others. Failure to adhere to these instructions may result in injury to the user or
others, or may cause damage to the machine or operation errors.
• Do not install the machine on an unstable surface, such as an unstable shelf or uneven
oor.
• Do not damage the power cord or any cables.
• Be sure to use the designated voltage only.
• Use manufacturer-supplied components and accessories only. We are not liable for
performance degradation, breakdowns, or accidents caused by third-party products.
• Using manufacturer-supplied laments is recommended for achieving the best printing
quality. Using third-party laments may result in unsatisfactory printing quality and a
blocked nozzle, and prevent the device from printing at full capacity.
• For the best printing results, allow the nozzle to cool down before printing.
• Do not shake or cause physical impacts to the machine.
• Do not disassemble or modify the machine.
• Be sure to turn off the power and disconnect the power cord and cables when moving
the machine.
• Do not turn off the power or load or remove the lament during printing.
• Do not turn off the software or open machine covers during printing. It can interrupt
printing or cause a system failure.
• Do not touch the nozzle during installation, operation, or immediately after the operation
is complete. Doing so may cause burns.
• Do not forcefully move or cause physical impacts to the nozzle unit. It may cause the
machine to malfunction or damage the sensors.
• Calibrate the gap between the print bed and the nozzle before printing.
• Do not insert or drop objects inside the printer (lament, etc.). Doing so may cause re
or damage.
• After use, open laments should be sealed and kept in a dry environment and out of
direct sunlight.
• Be sure there is adequate lament on the lament before printing.
• When printing stops due to a shortage of lament, replace the lament. If a printing job
is discontinued, it cannot be resumed. Before using the machine, check that there is
enough material available on the lament.
MARV User Manual
8
Supplied Accessories
Check that all of the pictured components and accessories are present before
installing the machine. If any items are missing or damaged, contact your retailer.
Note
• Use manufacturer-supplied components and accessories only. We are not liable for performance
degradation, breakdowns, or accidents caused by third-party products.
• The shape, positioning, and quantity of packing materials may change without prior notice for
quality improvement purposes.
ON
SD CARD
OFF
Machine Print bed Filament
Quick Setup Guide Manual and driver
CD-ROM Adhesive tape
Adapter Power cable USB cable
SD card Nozzle maintenance pin Calibration sheet
Warranty card
MARV User Manual
9
Machine and Installation Information
Make sure there is sufcient space to install the device.
Caution
Do not install the machine on an unstable surface, such as an unstable shelf or uneven oor.
Installation Space
100mm
100mm
850mm
586mm
146mm
357mm
385mm
820mm
MARV User Manual
10
Names of parts
Exterior
ON
SD CARD
OFF
Top cover
LCD
Front
cover
[OK] button
[▼] button
USB port
SD card slot
Power switch Firmware switch
Power plug-in
Este manual sirve para los siguientes modelos
6
Tabla de contenidos
