Martin System Micro B Manual de usuario

MICRO B

COLLAR RECEIVER

USER GUIDE EN

Table of Content

Description 3

Transmitter Magnet Location and Range 7

Switching the Collar Receiver On and Off 8

Fitting the Collar on the Dog 9

Checking the Collar Contact 10

Pairing the Collar Receiver with a Transmitter 11

Unpairing the Collar Receiver 12

Pairing the Collar Receiver via Bluetooth 13

Charging the Collar Receiver 14

Precautions for Use 16

Troubleshooting 17

Checking the Stimulation Operation 18

Recycling 19

Warranty 20

Conformity 21

2|Micro B Collar Receiver - User Manual - EN - 1.0

Table of Content

Description 3

Transmitter Magnet Location and Range 7

Switching the Collar Receiver On and Off 8

Fitting the Collar on the Dog 9

Checking the Collar Contact 10

Pairing the Collar Receiver with a Transmitter 11

Unpairing the Collar Receiver 12

Pairing the Collar Receiver via Bluetooth 13

Charging the Collar Receiver 14

Precautions for Use 16

Troubleshooting 17

Checking the Stimulation Operation 18

Recycling 19

Warranty 20

Conformity 21

2|Micro B Collar Receiver - User Manual - EN - 1.0

Description

Characteristics

□

The Micro B collar receiver is waterproof.

□

It has a discharged battery indicator.

□

The contact points are made of high quality stainless steel.

□

It is compatible with all transmitters from Martin System®.

□

It is easy to switch on and off.



Specifications

□

Dimensions:

□

Weight:

□

Power supply:

□

Frequency:

□

Antenna:

□

Operating temperature:

35 x 55 x 22 mm

34 g

3.7 V - 200 mAh Lithium Polymer

869.5 MHz

Integral

-20°C to +40°C

Micro B Collar Receiver - User Manual - EN - 1.0|3

Operating modes

Depending on your transmitter model and configuration, the Micro B collar

receiver is able to stimulate the dog in different ways and with different

levels.

•For more detailed information, please check the user guide of your

transmitter.

□

The Micro B collar receiver is equipped with:

•A buzzer.

•A vibrator.

•A stimulation system.

□

The Micro B collar receiver operates in 4 different default modes:

•Clicker (level 0).

•Stimulation (flash/nick, continuous and rising).

•Tone with vibration and stimulation (flash/nick, continuous and

rising).

•Warning tone and vibration followed by tone, vibration and

continuous stimulation.

4|Micro B Collar Receiver - User Manual - EN - 1.0

Operating modes

Depending on your transmitter model and configuration, the Micro B collar

receiver is able to stimulate the dog in different ways and with different

levels.

•For more detailed information, please check the user guide of your

transmitter.

□□The Micro B collar receiver is equipped with:

•A buzzer.

•A vibrator.

•A stimulation system.

□□The Micro B collar receiver operates in 4 different default modes:

•Clicker (level 0).

•Stimulation (flash/nick, continuous and rising).

•Tone with vibration and stimulation (flash/nick, continuous and

rising).

•Warning tone and vibration followed by tone, vibration and

continuous stimulation.

4|Micro B Collar Receiver - User Manual - EN - 1.0

Main benefits

Your Micro B collar receiver uses the best technologies in the electronic

collar industry and most of them are patented by Martin System®:

•The New High Tension Transformer - NHT (patented).

•The consistent reliable stimulation - S.S.C. ("Stimulation à Sensation

Constante") (patented).

•The Contact Measurement System - CMS (patented).

•The best quality contact points (made of marine grade stainless steel)

that greatly reduces the risk of chemical necrosis .



The smallest receiver with the longest battery life

□

The Martin System® patented NHT Transformer is about 1/8th the size

of a standard transformer, with the same capacity of stimulation and

consistent reliable stimulation.

□

The main benefits of using a NHT Transformer are:

•The smallest receiver with the longest battery life in standby.

•A stable stimulation even at high level when the battery is low.

Micro B Collar Receiver - User Manual - EN - 1.0|5

Safe and fair stimulation

The Micro B collar receiver is equipped with the patented S.S.C.

stimulation:

□

It measures the conditions of the dog's skin 20times per second .

□

It adapts the output stimulation level to ensure a constant and reliable

sensation felt by the dog.

□

This avoids the risk of accidental overstimulation of the dog due to

constantly changing environmental factors.



6|Micro B Collar Receiver - User Manual - EN - 1.0

Safe and fair stimulation

The Micro B collar receiver is equipped with the patented S.S.C.

stimulation:

□□It measures the conditions of the dog's skin 20times per second .

□□It adapts the output stimulation level to ensure a constant and reliable

sensation felt by the dog.

□□This avoids the risk of accidental overstimulation of the dog due to

constantly changing environmental factors.



6|Micro B Collar Receiver - User Manual - EN - 1.0

Transmitter Magnet Location and Range

The pictures below show, for different transmitters:

□

The location of the magnet.

□

The range of the collar receiver.

•The given range is valid in optimal conditions.

•For more detailed information, please check the user guide of your

transmitter.

Micro B Collar Receiver - User Manual - EN - 1.0|7

Switching the Collar Receiver On and Off

Switching the collar receiver ON

1. Slide the magnet (standalone or in the transmitter) next to the ON/

OFF/ synchronizing point of the receiver.

►

You hear an ascending tone.

►

The contact measurement starts if it is enabled in the application

(default setting).

►

The collar is ON and ready for use.

WARNING

If the tone does not start with the flashing of the LEDs, this means

that the battery is low and you should recharge it as soon as

possible.

TIP

Do not leave the magnet too long next to the ON/ OFF/

synchronizing point or the pairing process starts.

Switching the collar receiver OFF

1. Slide the magnet (standalone or in the transmitter) next to the ON/

OFF/ synchronizing point of the receiver.

►

You hear a descending tone.

►

The LEDs stop flashing.

►

The collar is OFF.

8|Micro B Collar Receiver - User Manual - EN - 1.0

Switching the Collar Receiver On and Off

Switching the collar receiver ON

1. Slide the magnet (standalone or in the transmitter) next to the ON/

OFF/ synchronizing point of the receiver.

►►You hear an ascending tone.

►►The contact measurement starts if it is enabled in the application

(default setting).

►►The collar is ON and ready for use.

WARNING

If the tone does not start with the flashing of the LEDs, this means

that the battery is low and you should recharge it as soon as

possible.

TIP

Do not leave the magnet too long next to the ON/ OFF/

synchronizing point or the pairing process starts.

Switching the collar receiver OFF

1. Slide the magnet (standalone or in the transmitter) next to the ON/

OFF/ synchronizing point of the receiver.

►►You hear a descending tone.

►►The LEDs stop flashing.

►►The collar is OFF.

8|Micro B Collar Receiver - User Manual - EN - 1.0

Fitting the Collar on the Dog

1. Clean and brush the fur. Remove any remaining underfur.

2. Position the Micro B collar receiver under the dog's neck.

3. Adjust the strap properly.

•If the strap is too loose, the contact points will not be in contact with

the dog’s skin and the dog will not feel the stimulations.

•If the strap is too tight, the dog will have difficulty breathing.

4. Use the CMS (Contact Measurement System) to fit the collar as loosely

as possible while ensuring a good contact with the skin.



Micro B Collar Receiver - User Manual - EN - 1.0|9

Checking the Collar Contact

The Micro B collar receiver uses the patented Contact Measurement

System (CMS).

□

A LED on the collar indicates if there is a contact with the dog's skin for

a safe and effective training.

□

The CMS makes it possible to avoid any accidental overstimulation

when there is no direct contact (due to bridging electricity).

□

While the CMS is checking for contact, the LED lights flash quickly and

alternatively.

□

The CMS is active for 2 minutes after switching the collar on.

□

When there is correct contact, one LED blinks twice every 3seconds.

□

Press on any button on the transmitter or on the FingerKick to stop the

CMS.

10|Micro B Collar Receiver - User Manual - EN - 1.0

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Producto para el cuidado de mascotas de Martin System

Martin System

Martin System Tiny Trainer TT1000 Manual de usuario

Martin System

Martin System No bark collar Manual de usuario

Martin System

Martin System PRO TRAINER 3000 Manual de usuario

Martin System

Martin System TT200 Manual de usuario

Martin System

Martin System Chameleon III-B Manual de usuario

Martin System

Martin System ET1000 Manual de usuario

Martin System

Martin System MPS DOG 2 Manual de usuario

Manuales populares de Producto para el cuidado de mascotas de otras marcas

Schwinn

Schwinn Rascal Manual de usuario

K&H

K&H Small Animal Manual de usuario

SHOR-LINE

SHOR-LINE 006.3230.00 Manual de usuario

Petsafe

Petsafe Stubborn Dog Receiver Collar Manual de usuario

Datamars

Datamars OMNI MAX Manual de usuario

Trixie

Trixie 24444 Manual de usuario

Roverpet

Roverpet 30DDPP Manual de usuario

SportDOG

SportDOG SD-105S-C Manual de usuario

Staywell

Staywell 400 Series Magnetic Manual de usuario

Dogtek

Dogtek Sonic Birdhouse Manual de usuario

Togfit

Togfit Deluxe Trigger Lock Door Gate Manual de usuario

Girafus

Girafus 227PA Manual de usuario

ubbink

ubbink KoiFeeder Solar Manual de usuario

ULTRACOM

ULTRACOM KOIRA-GPS Manual de usuario

CADOCA

CADOCA Deuba 106911 Manual de usuario

Dogtra

Dogtra RR Deluxe Manual de usuario

Carson

Carson CONVERTIBLE PET YARD 2200 Manual de usuario

Creative Cedar Designs

Creative Cedar Designs K-9 Kabin Manual de usuario