PAIR AND CONNECT THE SENTINEL WIFI SECURITY LIGHT FIXTURE TO YOUR ROUTER AND NETWORK
Option 2 . To push the "Rotation Of f "icon on the App screen for the LED head with the camera to be static in the
center position of the f ixture and then to open the SD memory card cover that is located at the bottom of the
LED lamp head and push the reset button in for 3 seconds . A notif ication sound will indicate the reset has been
successful, and then repeat the Wi-Fi pairing process below.
Option 1 . To delete the Sentinel WIFI Security Light camera f
ixture from the App screen , and then to repeat the
Wi-Fi pairing process explained below on the screenshots with 3 easy steps .
1. Click on menu bar
2. Click on Device Management
3. Drag the camera f ixture to Remove Device
Point the QR code displayed on your phone at the
Sentinel WIFI Security Light camara(Approx .15-20cm distance)
Once the Sentinel WIFI Security Light is successfully connected,
an acceptance sound will be heard when connected
5.There will be 2 (two) consecutive electronic beep sounds as indication that you can pair and connect the Sentinel WIFI Security
Light to your router and network - Your phone will generate a QR code which is pointed at the Sentinel WIFI Security Light camera
lens at a distance between 15 to 20cm apart to connect to the Wi-Fi network. On acceptance you will hear one electronic beep as
indication the process was successful then press“I heard a prompt" explained on the screenshot here below.
NB: If the connection or pairing process is not successful, you can reset the Sentinel WIFI Security Light by following
the below 2 options ;
R
