Marshall Amplification CV420-CS Manual de usuario

Broadcast A/V Division

CV420-CS

True 4K 60 Compact Camera

User Manual

[Firmware Version 0.43]

CV420-CS Manual

www.marshall-usa.com1 2

Table of Contents

1. Menu Structure

2. OSD Joystick and Button

3. WB CONTROL

4. AE CONTROL

5. DAY / NIGHT

6. AUDIO

7. IMAGE CONTROL

8. SPECIAL

9. SETUP

10. RESET

11. EXIT

12. TROUBLESHOOTING

Warranty

1. Menu Structure

Setup Sub Menu Sub Menu

WB CONTROL

ATW

ONE PUSH

INDOOR

OUTDOOR

MANUAL

BLUE

RED

AE CONTROL

AUTO

AGC MAX

SENS UP

AE BRIGHT

FLK CONTROL

LENS MODE

SHUT FIX

SHUTTER

AGC MAX

SENS UP

AE BRIGHT

AGC FIX

AGC

AE BRIGHT

FLK CONTROL

LENS MODE

MANUAL

SHUTTER

AGC

SENS UP

DAY/NIGHT

DAY

NIGHT NIGHT COLOR

AUTO

CV420-CS Manual

www.marshall-usa.com3 4

Setup Sub Menu Sub Menu

AUDIO

MIC/LINE AUDIO LEVEL

MIC AT TENUATOR

SAMPLE BITS

IMAGE CONTROL

CONTRAST

BRIGHTNESS

SATURATION

HUE

EDGE ENHANCE

AUTO SATURATE

AUTO EDGE

BLACK WHITE LV BLACK LEVEL

WHITE LEVEL

GAMMA CORRECT

DNR DNR MODE

DNR LEVEL

SPECIAL

DZOOM

DEFOG

BINNING

DEFECT PIXEL

DISP. FUNCTION

HDR

FLICKER DETECT

PRIVACY

SETUP

CAM TITLE

COMMUNICATION

CAM ID

ID DISPL AY

BAUD RATE

MODEL

S/W Ver

OUTPUT FORMAT

RESET USER/FACTORY

EXIT

2. OSD Joystick and Button

I/O Cable (included in box)

1. SET Used to access the menu and confrim selection.

2. UP Used to move the cursor up.

3. DOWN Used to move the cursor down.

4. LEFT Used to move the cursor left and change the value

5. RIGHT Used to move the cursor to the right and change the value.

54 R

WB CONTROL

AE CONTROL

DAY/NIGHT

AUDIO

IMAGE CONTROL

SPECIAL

SETUP

RESET

EXIT

Use the UP & DOWN

buttons to select the

desired item.

Use the LEFT & RIGHT

buttons to change the

sub-item.

> Icon indicates “Press OSD button” or “Enter Sub Menu”

Press SET button to access the Main Menu

LINE IN

RS485

MIC IN

POWER

CV420-CS Manual

www.marshall-usa.com5 6

3. WB CONTROL

• ATW: Continuously adjusts camera color balance in accordance with any change in color

temperature. Compensates for color temperature changes within the range of 1,900°K to

11,000°K

• ONE PUSH: Color temperature will be manually adjusted by pushing the OSD button. Place

the white paper in front of the camera when OSD button is pressed to obtain the optimum

result

• MANUAL: Select this to ﬁne-tune White Balance manually

You can adjust the blue and red tone level manually.

1. BLUE: Adjust the Blue tone of the image. (0~255)

2. RED: Adjust the Red tone of the image. (0~255)

• INDOOR: Select this to adjust white balance to indoor lighting condition

• OUTDOOR: Select this to adjust white balance to outdoor lighting condition

1. Adjust White Balance ﬁrst by using the ATW mode before switching to MANUAL mode.

2. White Balance may not work properly under the following conditions. In this case, select

the ATW mode.

• When the ambient illumination of the subject is dim.

• If the camera is directed towards a ﬂuorescent light or is installed in place where

illumination changes dramatically, the White Balance operation may become unstable.

WB CONTROL

AE CONTROL

DAY/NIGHT

AUDIO

IMAGE CONTROL

SPECIAL

SETUP

RESET

EXIT

MODE

BLUE

RED

RETURN

MANUAL

MENU WB CONTROL

Select WB CONTROL using the UP or DOWN button. You can change between AWB, ATW, PUSH,

and MANUAL using the LEFT or RIGHT buttons.

4. AE CONTROL

• AUTO: Adjusts the exposure level automatically. Detailed ﬁne tuning options are available

under this menu.

• SHUT FIX: Provides more detailed shutter speed options. All other controls are tuned for the

selected shutter speed.

• AGC FIX: Provides more detailed gain option. All other controls are tuned for the selected gain

value.

• MANUAL: Adjusts all values manually.

• SHUTTER: Speed can be set at auto or manual. (NTSC:1/60~1/10,000, PAL: 1/50~1/10,000)

• AGC: Adjust gain value from 0 ~ 27dB

• AGC MAX: Used to set maximum gain value to control the video noise caused by Auto

Gain Control. (0~15)

• SENS UP: Controls the digital slow shutter to allow extra light into the camera and adjust

the picture quality. (Off, x2~x15)

• AE BRIGHT: Select this to adjust auto exposure brightness levels. (0~24)

• FLK CONTROL: Provides a proper image sensor frequency to match the power frequency

in order to minimize video ﬂicker

• LENS MODE: Lens setting will be optimized for selected environment, for DC Iris lens only

WB CONTROL

AE CONTROL

DAY/NIGHT

AUDIO

IMAGE CONTROL

SPECIAL

SETUP

RESET

EXIT

AE MODE

SHUTTER

AGC

AGC MAX

SENS UP

AE BRIGHT

FLK CONTROL

LENS MODE

RETURN

AUTO

OFF

OUTDOOR

MENU AE CONTROL

Select AE CONTROL using the UP or DOWN button. You can select one sub-mode using the UP or

DOWN buttons.

CV420-CS Manual

www.marshall-usa.com7 8

5. DAY / NIGHT 6. AUDIO

• MODE: Set camera to either color mode or B&W mode. (Auto, Day, Night)

• DAY: Set camera to Day mode (Color)

• NIGHT: Set Camera to Night mode (B&W)

• NIGHT COLOR: When on, camera stays on color mode. Night (B&W) can be selected from

this mode. (On, Off)

• Auto: When set to AUTO mode, camera changes DAY and NIGHT mode automatically

• DELAY [SEC]: Adjusts time delay between Day to Night or Night to Day change

• D->N LEVEL: Adjusts sensitivity level of when camera changes from Day to Night

• N->D LEVEL: Adjusts sensitivity level of when camera changes from Night to Day

• MODE: Select MIC or LINE for audio input source

• AUDIO LEVEL: Select this to adjust audio levels manually

• MIC ATTENUATOR : Audio attenuation can be controlled from this menu to minimize the

audio noise level

• AGC LIMIT: Audio gain limit can be controlled while MIC ATTENUATOR is in used.

• SAMPLE BITS: Select the bit depth of audio

WB CONTROL

AE CONTROL

DAY/NIGHT

AUDIO

IMAGE CONTROL

SPECIAL

SETUP

RESET

EXIT

WB CONTROL

AE CONTROL

DAY/NIGHT

AUDIO

IMAGE CONTROL

SPECIAL

SETUP

RESET

EXIT

MODE

DELAY [SEC]

D->N LEVEL

N->D LEVEL

NIGHT COLOR

RETURN

MODE

AUDIO LEVEL

MIC AT TENUATOR

AGC LIMIT

BITS

RETURN

DAY (COLOR) MIC

0 dB

OFF

24 BITS

MENU MENUDAY / NIGHT AUDIO

Select DAY / NIGHT using the UP or DOWN button. You can select one sub-mode from AUTO,

COLOR, and NIGHT using the UP or DOWN buttons.

Select AUDIO using the UP or DOWN button and enter ON using SEL button. You can select one

sub-mode using the UP or DOWN buttons.

CV420-CS Manual

www.marshall-usa.com910

7. IMAGE CONTROL 8. SPECIAL

• CONTRAST: Adjust the image contrast level value

• BRIGHTNESS: Adjust the image brightness level value

• SATURATION : Adjust the image saturation level value

• HUE: Adjust the image hue level value

• EDGE ENHANCE: Adjust the image sharpness level

• AUTO SATURATE : Decrease saturation automatically when noise scene is detected

• AUTO EDGE: Enable or disable auto sharpness control

• BLACK WHITE LV: Adjust the image black & white level value

• GAMMA CORRECT: Adjust the image output gamma level

• DNR: Reduces the video noise at low ambient light

• DZOOM: Digitally zoom the video by the desired ratio

• DEFOG: This feature will help increase visibility in extreme weather conditions, such as fog,

rain or in a very strong luminous intensity

• BINNING: Enable or disable pixel binning

• DEFECT PIXEL: Advanced defective pixel correction menu. Power cycle the camera after

running DPC

• DISP. FUNCTION: Display effect such as freeze mirror, rotation, ands style can be applied

from this menu

• HDR: Enable HDR mode (SDR, PQ, HLG)

1. SDR: Apply Standard Dynamic Range

2. PQ: Apply Perceptual Quantizer

3. HLG: Apply Hybrid Log Gamma

• FLICKER DETECT: Adjust the image sensor frequency to match the power frequency

• PRIVACY: Mask an area you want to hide on the screen by applying the privacy zones

WB CONTROL

AE CONTROL

DAY/NIGHT

AUDIO

IMAGE CONTROL

SPECIAL

SETUP

RESET

EXIT

WB CONTROL

AE CONTROL

DAY/NIGHT

AUDIO

IMAGE CONTROL

SPECIAL

SETUP

RESET

EXIT

CONTRAST

BRIGHTNESS

SATURATION

HUE

EDGE ENHANCE

AUTO SATURATE

AUTO EDGE

BLACK WHITE LV

GAMMA CORRECT

DNR

RETURN

DZOOM

DEFOG

BINNING

DEFECT PIXEL

DISP. FUNCTION

HDR

FLICKER DEFECT

PRIVACY

RETURN

MIDDLE

DEFAULT

OFF

ON >

ON>

MENU MENUIMAGE CONTROL SPECIAL

Select IMAGE CONTROL using the UP or DOWN button.

You can select CONTRAST, HUE, and image related menu using the UP or DOWN buttons.

Select SPECIAL using the UP or DOWN button.

You can select BINNING, FREEZE, and HDR using the UP or DOWN buttons.

Select the DNR level from Auto, LOW, MIDDLE, and HIGH using the LEFT or RIGHT button.

CV420-CS Manual

www.marshall-usa.com11 12

9. SETUP 10. RESET

• CAM TITLE: Camera title can be turned ON or OFF

• COMMUNICATION: VISCA communication can be adjusted

• CAM ID: Camera ID can be setup. (0~254)

• ID DISPLAY: Camera ID display can be displayed

• BAUDRATE : Camera baud rate can be set. (2400, 4800, 9600, 19200, 38400, 115200)

• MODEL: Display product model number

• S/W VER: Display software version number

• OUTPUT FORMAT: Camera resolution and frame rate can be set

• RESET: Reset the camera settings to the factory defaults or user setting value. RESET

• MODE: Set the camera setting to either “FACTORY” or “USER”.

1. USER: Select “USER” if user saved setting value is needed.

2. FACTORY: Select “FACTORY” if factory default setting is needed.

• RESET: Reset the camera to the mode set on RESET MODE.

• SAVE AS USER: Save the current camera settings as “USER”.

WB CONTROL

AE CONTROL

DAY/NIGHT

AUDIO

IMAGE CONTROL

SPECIAL

SETUP

RESET

EXIT

WB CONTROL

AE CONTROL

DAY/NIGHT

AUDIO

IMAGE CONTROL

SPECIAL

SETUP

RESET

EXIT

CAM TITLE

COMMUNICATION

MODEL

S/W VER

OUTPUT FORMAT

RETURN

MODE

RESET

SAVE AS USER

RETURN

1080p 59.94

FACTORY

MENU MENUSETUP RESET

CAMERA setup can be adjusted from this menu.

You can select CAMERA ID, Communication, System Info, and Output Format using the UP or DOWN

buttons.

Select RESET using the UP or DOWN button.

(1080 by default)

Select the FRAME RATE using the LEFT or RIGHT buttons.

Available Frame Rates are:

4096 x 2160p 60, 59.94, 50, 30, 29.97, 25, 24, 23.98

3840 x 2160p 60, 59.94, 50, 30, 29.97, 25, 24, 23.98

1920 x 1080p 60, 59.94, 50, 30, 29.97, 25, 24, 23.98

1920 x 1080i 60, 59.94, 50

1280 x 720p 60, 59.94, 50

CV420-CS Manual

www.marshall-usa.com13 14

11. EXIT 12. TROUBLESHOOTING

• SAVE: Exit the setup after saving the value changes.

WB CONTROL

AE CONTROL

DAY/NIGHT

AUDIO

IMAGE CONTROL

SPECIAL

SETUP

RESET

EXIT

Select EXIT using the UP or DOWN button. Problem Solutions

Nothing appears

on the screen.

a. Check that all connected devices are powered on.

b. Conﬁrm that the voltage is correct.

c. Conﬁrm that the power supply provides enough current to power the

camera.

d. Check that all video cables are correctly connected.

The picture is not

clear.

a. Check that your monitor is correctly adjusted.

b. Conﬁrm that the glass in front of the lens is clean. If there is dust, dirt,

or ﬁngerprints on the glass, the image quality will be affected. To clean

the glass, use a soft, dry, and non-abrasive cloth or a commercially

available lens cleaning set.

c. Correctly adjust the focus.

The picture has

interference.

a. The camera may be close to a high voltage source, such as a power

generator.

b. The BNC cable is not terminated properly.

c. The video cables are not connected properly.

The picture

is ﬂickering

continually.

a. Check the termination and set the impedance at 75Ω properly.

b. Ensure that the camera is not pointing towards the Sun or any light

source.

c. Check if there is any intermediate device.

d. Check if the distance of the video cable exceeds the maximum

transferable limitation.

The camera is

not synchronizing

with the reference

signal.

a. Make sure Tri-Level reference signal is used.

b. Locking takes up to 1 minute depending on the signal strength. Make

sure the sync LED is solidly lit.

c. Check if the cable and connectors used in reference sync are in good

condition.

d. Make sure the cable length used in reference sync does not exceed 100

ft.

e. Make sure OUTPUT EN is on when using the genlock output.

20608 Madrona Avenue, Torrance, CA 90503

Tel: (800) 800-6608 / (310) 333-0606 • Fax: 310-333-0688

www.marshall-usa.com

support@marshall-usa.com

Marshall Electronics warranties to the ﬁrst consumer that this device will, under normal use,

be free from defects in workmanship and materials, when received in its original container, for

a period of two years from the purchase date. This warranty is extended to the ﬁrst consumer

only, and proof of purchase is necessary to honor the warranty. If there is no proof of purchase

provided with a warranty claim, Marshall Electronics reserves the right not to honor the warranty

set forth above. Therefore, labor and parts may be charged to the consumer. This warranty

does not apply to the product exterior or cosmetics. Misuse, abnormal handling, alterations or

modiﬁcations in design or construction void this warranty. No sales personnel of the seller or

any other person is authorized to make any warranties other than those described above, or to

extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period

described above.

Due to constant effort to improve products and product features, speciﬁcations may change

without notice.

Warranty

V.1. 2

Otros manuales para CV420-CS

Tabla de contenidos

Otros manuales de Videocámara de Marshall Amplification

Marshall Amplification

Marshall Amplification CV730 Manual de usuario

Marshall Amplification

Marshall Amplification CV226 Manual de usuario

Marshall Amplification

Marshall Amplification CV355-10X Manual de usuario

Marshall Amplification

Marshall Amplification CV566 Manual de usuario

Marshall Amplification

Marshall Amplification CV620-WH2 Manual de usuario

Marshall Amplification

Marshall Amplification CV503-WP Manual de usuario

Marshall Amplification

Marshall Amplification CV620-WH2 Manual de usuario

Manuales populares de Videocámara de otras marcas

Toshiba

Toshiba CAMILEO Z100 Manual de usuario

Panasonic

Panasonic NV-VS40B Manual de usuario

Canon

Canon RC 260 Manual de usuario

Sony

Sony Handycam DCR-DVD7E Manual de usuario

Brinno

Brinno TimeLapse TLC200 Manual de usuario

JVC

JVC GR-SXM68AC Guía de inicio rápido

Panasonic

Panasonic AG-HMC152EN Manual de usuario

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manual de usuario

MYDLINK

MYDLINK DCS-6100LH Manual de usuario

Sony

Sony video Hi8 Handycam CCD-TR555 Manual de usuario

SECURECOM

SECURECOM V-5014B Manual de usuario

Panasonic

Panasonic HDC-SD100 Manual de usuario

Sharper Image

Sharper Image U-VIDEO Manual de usuario

JVC

JVC AA-V15EG Manual de usuario

Canon

Canon LEGRIA HV40 Manual de usuario

Sony

Sony Handycam DCR-VX2000 Manual de usuario

RCA

RCA CC616 Manual de usuario

Panasonic

Panasonic NVM40 Manual de usuario