Mark SIDIUS ZOOM 555 Manual de usuario

SIDIUS ZOOM 555

User Manual – Version 1.0

SAFETY INSTRUCTIONS

1. Read the instructions of this manual.

2. Keep these instructions in a safe place.

3. Heed and follow all warnings and instructions.

4. Please, respect your country safety regulations.

5. Don’t use this device close to the water or high humidity places. Clean only with dry cloth.

6. Don’t install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat. Make certain that the equipment is always installed so that is

cooled and can’t overheat.

7. Don’t block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Protect the power cord from being walked on or pinched, particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

9. Only use attachments/accessories specified by MARK PRO.

10. Unplug this device during lightning storms or when unused for long periods of time.

11. The technical service is required when the device has been damaged in any way, such as power

supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device, doesn’t

operate normally or has been dropped.

12. To completely disconnect this apparatus from the AC mains, disconnect the power supply cord

plug from the AC receptacle.

13. The mains plug of the power supply cord shall remain readily operable.

14. WARNING – to reduce the risk of fire or electric shock, don’t expose this device to rain or humidity.

15. Don’t expose this equipment to dripping or splashing and ensure that no objects filled with liquids,

such as vases, are placed on the equipment.

16. For rigging installation, please, follow the recommendations included in this user manual.

OVERVIEW

SIDIUS ZOOM 555 is a moving head featuring 37 RGBW 15W LEDs. This series of bright LEDs allows a

rich spectrum of colours to be obtained by mixing R, G, B, W. Its high-quality motors offer smooth

movements in 8 and 16 bits with wide scrolling. The setup interface has a full information display and

buttons to navigate through the menus, selecting parameters such as: Pan/Tilt reverse or reset

function. It includes 3 DMX modes (12, 20 and 32 channels), dimming of the primary colours (with

mixing function), zoom and strobe function. Also, the complete LED matrix can be divided into 4

different zones and control a specific colour in each of them.

Technical Data:

Power Supply

100-240 V 50/60 Hz

Consumption

550 W

Light source

37x 15W RGBW LEDs

Dimmer

0-100 Linear Adjustment

Pan

540º 8-16 bit

Tilt

270º 8-16 bit

DMX Channels

32, 20 & 12 channels

Mode

DMX 512 /Audio/Auto/Master-Slave

Input connections

3 pin XLR

Output connections

3 pin XLR

IP range

Dimensions (WxHxD)

460 x 360 x 490 mm

Weight

18 Kg

Features:

Moving head which includes 37x 15W RGBW LEDs

Display and interface for setting functions.

Pan/Tilt Reverse.

2 fixation ways: rigging or flat surface.

INSTALLATION

This product is only suitable for professional use. SIDIUS ZOOM 555 is designed for indoor use, it is

IP20 protection class. This device should be kept dry to avoid moisture, overheating or dusty

environment. Ensure that the unit does not take into contact with water or any other liquid.

SIDIUS ZOOM 555 can be placed in a stable surface or stand but the common operating mode is rigging

it in a truss system. Please, check and follow the next recommendations for a safe use of this device:

- The truss system must be built in a way that it can hold 10 times the weight of all rigging

elements for 1 hour without any harming deformation.

- The fixation system (clamps or hangs) must be able to hold 10 times the weight of the device.

- The device must always be secured with a safety attachment, e.g. steel cable.

- The operator must check that the installation meets the safety standards and the device

installation is approved by a skilled person.

DMX Connection.

The DMX cable must use the professional shielded twisted pair cable. Standard loudspeaker cable is

not reliable to control the long-range data. 24AWG cable is suitable for up to 300 meters long-distance

signal transmission; for longer distances, a DMX 512 signal amplifier should be used.

Don’t overload the connection. One continuous connection can only support up to 30 devices. It is

advisable to use a DMX splitter in order to distribute the signal without losing its integrity.

Connect the DMX512 input terminal to the controller. After that, connect the output terminal to the

next device. Repeat this step with all fixtures in the chain. To prevent system errors, the last device in

a DMX chain needs to be equipped with a terminating resistor (120 ohm, 1/4 Watt).

Pin occupation

Pin 1: Ground

Pin 2: Pin -

Pin 3: Pin +

To connect more than one unit in a chain, please, follow this picture. The output of the first unit must

provide to the next DMX input of the signal, this way it is possible to send the signal to all the devices

in the chain.

ADVANCED USE

CONTROL PANEL

SIDIUS ZOOM 555 allows to get configurated in different ways thanks to its panel and selection

buttons.

Use the buttons to navigate between each function to select the correct value. (Press ENTER to confirm

the setting).

In the following table are shown all the options displayed to set the SIDIUS ZOOM 555 in menu

interface:

1.XY

Reverse

Pan

YES--NO

Tilt

YES--NO

2.Mic

Sense

0--100

3.NO

Signal

Mode

DMX512

Auto 1

Auto2

4.Reset

YES--NO

5. Default

YES--NO

6. factory

Set

Addr

d001-

d512

Disp

disp - dsip

English

Mode

DMX512

Auto 1

Auto 2

12CH/20CH/32CH

Channels

DMX CONTROL MODES

The following table shows DMX channel function:

32 channels mode

Function

Description

Value

CH1：

Level adjustment

0----255

CH2：

Horizontal fine-

tuning

Horizontal fine-tuning

0----255

CH3：

vertical

adjustment

vertical adjustment

0----255

CH4：

Vertical fine-

tuning

Vertical fine-tuning

0----255

CH5：

horizontal/vertical

speed

from fast to slow

0----255

CH6：

Zoom

From near to far

0----255

CH7：

Total dimmer

From dark to bright

0----255

CH8：

Strobe

No effect

0----15

CH8：

Strobe

Normal strobe (from slow to fast)

16----215

Random flash

216----255

CH9：

Dimmer

Mode 1 INSTANT

0----49

Mode2 NORMAL

50----99

Mode3 SOFT

100----149

Mode4 SMOOTH

150----199

Mode5 VERY SMOOTH

200----255

CH10：

From dark to bright

0----255

CH11：

From dark to bright

0----255

CH12：

From dark to bright

0----255

CH13：

From dark to bright

0----255

CH14：

From dark to bright

0----255

CH15：

From dark to bright

0----255

CH16：

From dark to bright

0----255

CH17：

From dark to bright

0----255

CH18：

From dark to bright

0----255

CH19：

From dark to bright

0----255

CH20：

From dark to bright

0----255

CH21：

From dark to bright

0----255

CH22：

From dark to bright

0----255

CH23：

From dark to bright

0----255

CH24：

From dark to bright

0----255

CH25：

From dark to bright

0----255

CH26：

Macro color

NO effect

0----9

R100%,G UP,B0%

10----39

R DOWM,G100%,B0%

40----69

R0%,G100%,B UP

70----99

R0%,G DOWM,B100%

100----129

R UP,G0%,B100%

130----159

R100%,G0%,B DOWM

160----189

R100%,G UP,B UP

190----219

R DOWM,G DOWM,B100%

220----249

R 100%,G 100%,B100%,W100%

250----255

CH27：

Light beam effect

No effect

0----9

Static effect (10 number)

10----169

Dynamic effect (9 number and one type)

170----149

CH28：

Light bead effect

speed

From fast to slow

0----255

CH29：

Graphics effect

Static graphics1

0----9

Static graphics2

10----19

Static graphics3

20----29

Static graphics4

30----39

Static graphics5

40----49

Static graphics6

50----59

Static graphics7

60----69

Dynamic graphics1

70----79

Dynamic graphics2

80----89

CH29：

Graphics effect

Dynamic graphics3

90----99

Dynamic graphics4

100----109

Dynamic graphics5

110----119

Dynamic graphics6

120----255

CH30：

Graphics

transformation

speed

0----255

CH31：

CTO

10000K-2500K

0---255

CH32：

Reset

No effect

0----49

auto1

50----99

Auto 2

100----149

Reset

201----255

20 CHANNEL MODE

Ch 1：

Level adjustment

0----255

Ch 2：

Horizontal fine-tuning

0----255

Ch 3：

Vertical adjustment

0----255

Ch 4：

Vertical fine-tuning

0----255

Ch 5：

Horizontal / vertical speed

From fast to slow

0----255

Ch 6：

Zoom

From near to far

0----255

Ch 7：

Total dimming

From dark to bright

0----255

Ch 8：

Strobe

No effect

0----15

Normal strobe (from

slow to fast)

16----215

Random flash

216----255

Ch 9：

Dimmer mode

Mode 1

0----49

Mode 2

50----99

Mode 3

100----149

Mode 4

150----199

Mode 5

200----255

Ch 10：

From dark to bright

0----255

Ch 11：

From dark to bright

0----255

Ch 12：

From dark to bright

0----255

Ch 13：

From dark to bright

0----255

Ch 14：

Macro color

No effect

0----15

R100%,G UP,B0%

16----35

R DOWM,G100%,B0%

36----55

R0%,G100%,B UP

56----75

R0%,G DOWM,B100%

76----95

R UP,G0%,B100%

96----115

R100%,G0%,B DOWM

116----135

R100%,G UP,B UP

136----155

R DOWM,G

DOWM,B100%

156----175

R 100%,G

100%,B100%,W100%

176----195

Ch 15：

Lamps effect

No effect

0----9

Static effect (10

number)

10----169

Dynamic effect (9

number and one type)

170----149

Ch 16：

Lamp effect speed

From fast to slow

0----255

Ch 17：

Graphics effect

Static graphics 1

0----9

Static graphics 2

10----19

Static graphics 3

20----29

Static graphics 4

30----39

Static graphics 5

40----49

Static graphics 6

50----59

Static graphics 7

60----69

Dynamic Graphics 1

70----79

Dynamic Graphics 2

80----89

Dynamic Graphics 3

90----99

Dynamic Graphics 4

100----109

Dynamic Graphics 5

110----119

Dynamic Graphics 6

120----255

Ch 18：

Graphics transformation

speed

0----255

CH19：

CTO

10000K-2500K

0---255

Ch 20：

Reset

No effect

0----49

Auto 1

50----99

Auto 2

100----149

Reset

201----255

12 Channels Mode

Ch 1：

Level adjustment

0----255

Ch 2：

Vertical adjustment

Level adjustment

0----255

Ch 3：

Horizontal / vertical speed

Vertical adjustment

0----255

Ch 4：

Zoom

From fast to slow

0----255

Ch 5：

Total dimmer

From near to far

0----255

Ch 6：

Strobe

From dark to bright

0----255

Ch 7：

Lamps effect

No effect

0----15

Normal strobe (from slow

to fast)

16----215

Random flash

216----255

Ch 8：

Lamp effect speed

No effect

0----9

Static effect (10

number)

10----99

Dynamic effect 1

100----149

Dynamic effect 2

150----255

Ch 9：

Graphics effect

Static graphics 1

0----9

Static graphics 2

10----19

Static graphics 3

20----29

Ch 9：

Graphics effect

Static graphics 4

30----39

Static graphics 5

40----49

Static graphics 6

50----59

Static graphics 7

60----69

Dynamic Graphics 1

70----79

Dynamic Graphics 2

80----89

Dynamic Graphics 3

90----99

Dynamic Graphics 4

100----109

Dynamic Graphics 5

110----119

Dynamic Graphics 6

120----255

Ch 10：

Graphics transformation

speed

0----255

Ch 11：

CTO

NO FUNCTION

0---9

10000K-2500K

10---255

Ch 12：

Reset

No effect

0----49

Auto 1

50----99

Auto 2

100----149

Reset

201----255

CAUTIONS

Prevention of electric shock

The electrical connection must only be carried out by qualified personal. Before installing, make sure

you use the same power voltage marked in the SIDIUS ZOOM 555 (100-240V/50-60Hz). Each device

must be properly grounded and installed in accordance with the relevant standards. Don’t use the

device in a lightning storm or wet environment.

To prevent burning of fire

1. Never install the device directly on the surface of ordinary combustible material.

2. The equipment must be installed away from inflammable and explosive materials.

3. Keep at last 0,5 m around the unit to ventilation purpose.

4. Do not place any object on the lens.

5. Do not replace with non-original spare parts. Contact your MARK dealer.

Unpacking

Note: Before unpacking, check it for possible damage that might have occurred during transportation

or not. If you find any damage, please do not use the unit and contact the MARK PRO dealer.

Tabla de contenidos

Idiomas:

Otros manuales de Equipo de iluminación de Mark

Mark

Mark PAR-16 Manual de usuario

Mark

Mark BLINDER 4L Manual de usuario

Mark

Mark MULTIPROFILE ZOOM 15-30 Manual de usuario

Mark

Mark Infra Mono 50-18 Guía del usuario

Mark

Mark ECOLED Manual de usuario

Mark

Mark MULTIPAR 575/2 Manual de usuario

Mark

Mark BEAM 201 Manual de usuario

Mark

Mark SUPERPARLED ECO 18 Manual de usuario

Mark

Mark SUPERPARLED ECO 36 Manual de usuario

Mark

Mark SUPERMULTIPARLED 108/4i Manual de usuario

Mark

Mark SIDIUS LED 368 Z Manual de usuario

Mark

Mark MBAR 4 72 BAT Manual de usuario

Mark

Mark PAR 36 ECO Manual de usuario

Mark

Mark DECO PAR 16 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario