Marine PC MPC-MI19 Manual de usuario

USER MANUAL

19” Bridge Display

Type Approved by ABS

MARINE PC

Information Disclaimer

This MarinePC User Manual is provided“as-is”, without warranty of any kind, either expressed or implied, including but not

limited to the implied warranties or merchantability and tness for a particular purpose.

Documentation Change Notice

The information in this User Manual is subject to change without prior notice in order to improve readability and reliability

as well as design and function. These changes shall be incorporated in a new revision, available from the product and/or

download section of the MarinePC web site, www.marinepc.com.

Liability

In no event shall MarinePC be liable for direct, indirect, special incidental or consequential damages arising out of the use of

or the inability to use MarinePC’s product or its documentation, even if advised of the possibility of such damages.

Endorsement

Product names mentioned herein are used for identication purposes only and may be trademarks and/or registered trade-

marks of their respective companies.

This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual, in

whole or part, may be reproduced by any means, in any form, without prior written permission of MarinePC.

Owner Record

Here is an easy-to-locate form to record the unit’s serialnumber, andfrom the invoice, record the

invoice date. The unit’s serial number is located onthe back panel.

If the unit ever requires service, please refer to thisinformation when contacting the MarinePC

Service Center.

Product Serial Number Invoice Date

MPC-MI19 ____ / ____ /____

CAGE CODE 3W7C2

GSA Contract GS-07F-0154T

1-480-515-1838

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR

OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.

DO NOT OPEN THE CABINET. THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK, NO

USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns the user that un-insulated voltage within

the unit may be large enough to cause electric shock.

Therefore, it is dangerous to touch any part inside the unit.

This symbol alerts the user that important literature

about the operation and maintenance of this unit has

been included. Read it carefully to avoid any problems.

TABLE OF CONTENTS

CONTENTS ..............................................................................................................6

SHIPPING CARTON CONTENTS ...................................................................................6

INTRODUCTION.......................................................................................................7

About MarinePC..............................................................................................................7

Customer Service.........................................................................................7

PRODUCT SAFETY PRECAUTIONS..............................................................................8

ABBREVIATIONS ...........................................................................................................9

MPC-MI19 USER FEATURES.....................................................................................10

INSTALLATION......................................................................................................11

General Installation and Mounting Instructions.........................................................11

General Installation and Mounting.............................................................................................. 11

Mounting Instructions .................................................................................................................11

Cables...........................................................................................................................12

DC power input connector assembly..........................................................................................12

Cable Connections.......................................................................................................13

AC Power Input ..........................................................................................................................13

DC Power Male Connector (24V DC IN)....................................................................................13

RGB HD15 Female Signal Connector (RGB IN)........................................................................ 14

COMPOSITE BNC Connector (COMP 1) ..................................................................................14

COMPOSITE BNC Connector (COMP 2) ..................................................................................14

DVI-D VIDEO Signal Female Connector (DVI-D IN).................................................................. 14

SCOM (RS232) and Buzzer control input Female Connector (SCOM/BUZZER)......................14

Remote Brightness Interface Male Connector (REMOTE BRIGHTNESS)................................15

Programming / Field Service Interface (PROG)......................................................................... 15

Earth Ground..............................................................................................................................15

CABLE TIEDOWNS ......................................................................................................15

Compass Safe Distance...............................................................................................16

ECDIS Installation Setup .............................................................................................16

OPERATION...........................................................................................................17

FRONT PANEL DISPLAY USER CONTROLS..............................................................17

Power ON/OFF...........................................................................................................................17

OSD CONTROL BUTTONS....................................................................................................... 17

OSD HOT KEYS.........................................................................................................................18

FRONT PANEL Backlight Dimming Control...............................................................................18

FRONT PANEL INDICATORS................................................................................................... 18

FRONT PANEL ALARMS .......................................................................................................... 19

Buzzer – Remotely controlled .....................................................................................19

Remote Backlight Dimming Control ...........................................................................19

OSD FUNCTIONS .........................................................................................................20

ECDIS OPERATION......................................................................................................24

Setting Controls for route monitoring..........................................................................................24

Color Differentiation Test Diagram Test.....................................................................................24

Grayscale Test ...........................................................................................................................25

Setting Backlight Brightness for ECDIS Operation .................................................................... 25

Backlight Dimming Operation.....................................................................................27

Front Panel LED Indicator Dimming Operation..........................................................27

MAINTENANCE......................................................................................................28

PREVENTIVE MAINTENANCE .....................................................................................28

Surface Cleaning........................................................................................................................ 28

CORRECTIVE MAINTENANCE ....................................................................................28

SPECIFICATIONS..................................................................................................29

MarinePC

APPENDIX ............................................................................................................. 32

SHIPPEDOSD CONFIGURATION................................................................................32

Function description for de-interlacing mode AFM, TNR, MADI, LADI.....................33

PIP mix table.................................................................................................................33

INPUT CONNECTOR PIN ASSIGNMENTS........................................................... 34

DC Power Connection Male (24V DC IN).....................................................................34

RGB HD15 Signal Connections (RGB IN) ...................................................................34

COMPOSITE BNC Connections (COMP 1)..................................................................35

COMPOSITE BNC Connections (COMP 2)..................................................................35

DVI-D VIDEO Signal Connections (DVI-D IN)..............................................................35

SCOM (RS232) and Buzzer control input Connections (SCOM/BUZZER)................36

Remote Brightness Interface Connections (REMOTE BRIGHTNESS)......................36

Programming / Field Service Interface (PROG)..........................................................36

TROUBLESHOOTING TIPS..........................................................................................37

SERIAL COMMUNICATIONINTERFACE (SCOM-RS232)................................... 38

Message Format...........................................................................................................38

Response Time.............................................................................................................39

Backlight Brightness Minimum Value Command (BRI) INPUT: ................................39

Backlight Brightness Maximum Value Command (BRM) INPUT: .............................39

Backlight Brightness Command (BRT) INPUT:..........................................................39

(BZZ) INPUT:.................................................................................................................40

Download ECDIS DVI-D Table from Display Command (DND) INPUT:.....................40

Download ECDIS VGA Table from Display Command (DNV) INPUT: .......................41

Read ECDIS Table Number of Pages Command (CMD) INPUT:................................41

Elapsed Time Counter Command (ETC) INPUT:........................................................42

Request Manufacturer ID (MAN) INPUT:.....................................................................42

Serial Number Command (SNB) INPUT:.....................................................................42

Display Firmware Version (SWI) INPUT:.....................................................................43

Temperature Sensor Command (TMP) INPUT:...........................................................43

Request Type/Model Number (TYP)INPUT: ...............................................................44

OSD Control Command (MCC) INPUT: .......................................................................45

INPUT ERRORS AND RESPONSES.............................................................................75

ADDR (Byte 1) Error...................................................................................................................75

IHCHK (Byte 6) Error..................................................................................................................75

ATTN (Byte 0) Error....................................................................................................................75

CMD (Byte 2/3/4) Error...............................................................................................................75

LEN (Byte 5) Error ......................................................................................................................75

DATA (Byte 7) Error ...................................................................................................................77

IDCHK (Byte 8) Error..................................................................................................................77

Hex, DEC, ASCII conversion table ..............................................................................78

DISPLAY DIMENSIONS......................................................................................... 84

CONTENTS

SHIPPING CARTON CONTENTS

Thank you for purchasing this MarinePC MPC-MI19 Display.

The carton contains the items listed below:

•19 INCH MPC-MI19 Display

•Mounting Accessory Kit

•Product CD containing:

–User’s Guide

–Data Sheet

•ECDIS CD with Color Tables (Optional)

I/O cable kits are available separately.

Please check the carton and its content for damage that may have occurred during

shipment.

Report any damage to the shipping agent immediately and do not operate the

display if it appears to have been damaged. All warranty returns must use the

original shipping carton and packaging materials to prevent shipping damage.

Report any damage to the shipping agent immediately and do not

operate the display if it appears to have been damaged. All

INTRODUCTION

With this purchase of thisMarine Grade Bridge Display, the MPC-MI19, we welcome you to

MarinePC’s family of ruggedized marine grade products.

Serious mariners require serious products for their demanding applications. MarinePC has

been dedicated to providing exceptional computing anddisplay products for the maritime

industry for many years. We are proudto be a chosen supplier of many NaviesandCoastGuards

around the world, Commercial Maritime, military and para-military forces, state and

local lawenforcement, as well as recreational users.

MarinePC is based in Phoenix, Arizona USA. This product is designed, manufactured and tested

in the United States, and is certied compliant with the IMO Standard IEC60945 for Maritime Bridge

Electronics by the American Bureau of Shipping (ABS).

MarinePC oers a full range of marinized LCD Displays and Computers, from our outdoor waterproof

8.4”, 10.4”, 12.1” and 15” MPC-AWM Professional Series (also available in MIL-STD version), to our

standard duty and ABS Type Approved Bridge Displays, Indoor and Outdoor Integrated PanelPC’s,

fanless ruggedized computers and our 19” rack mount fully congurable computers and servers.

All of our computer products are open architecture and use genuine Intel Core processors.

PRODUCT SAFETY PRECAUTIONS

Follow all warnings and instructions marked on the display.

Do not attempt to service this display yourself. Removing the display cover or back

may expose you to dangerous voltage or other risks. Refer all servicing to qualified

service personnel.

Adequate ventilation must be maintained to ensure reliable and continued operation

and to protect the display from overheating.

To protect from electrical shock, unplug the display from the power source before

relocating.

This display should be operated from the type of power source indicated on the

displays rating label.

Do not place any heavy objects on the power cord. Damage to the cord may cause

shock or fire.

Unplug this displays power source and refer servicing to qualified service personnel

in the eventthat:

Power cord or plug is damaged or frayed.

The display does not operate normally when the operating instructions are

followed.

The display has been dropped or the cabinet damaged.

The display exhibits a distinct change in performance, indicating a need for

service.

ABBREVIATIONS

ACK – Acknowledge

AMLCD – Active Matrix Liquid Crystal Display

cd/m2 –Candelas per meter squared

DVI-D – Digital Video Interface

ENC– Electronic Navigational Charts

ESD– Electrostatic Discharge

ECDIS – Electronic Chart Display and Information Systems

Hz – Hertz

IAW – In Accordance With

IHO – International Hydrographic Organization

kHz – Kilohertz

LCD – Liquid Crystal Display

LED – Light Emitting Diode

NAK – Negative Acknowledge

NTE – Not To Exceed

OSD – On Screen Display

PBP – Picture By Picture

PIP – Picture In Picture

RX – Receive

RGB – Red, Green, Blue video

SCOM – Serial Communication interface

TX – Transmit

VAC – Volts, Alternating Current

VDC – Volts, Direct Current

VESA – Video Electronics Standards Association

VGA – Video Graphics Adaptor

MPC-MI19 DISPLAY FEATURES

Capable of displaying 16,772,166 colors: The display’s high-contrast LCD

enhances color vibrancy and improves focus with no geometric distortion.

Auto Screen size adjustment: Will adjust display for optional performance and

provide full screen images on even non-native formats.

Wide viewing angle: ±89°typical all directions.

Anti-Reflective Screen: All models are supplied with Anti-reflective Anti-glare

protective safety glass.

Low power consumption.

Tabla de contenidos

Manuales populares de Sistema GPS marino de otras marcas

JRC

JRC JHS-183 Manual de usuario

Thuraya

Thuraya IP Voyager Manual de usuario

Furuno

Furuno GP-1610CF Manual de usuario

Raytheon

Raytheon NautoPilot NP 5100 Manual de usuario

Garmin

Garmin GPSMAP 8008 MFD Manual de usuario

Furuno

Furuno GP-1650WDF Manual de usuario

Iridium

Iridium Pilot Manual de usuario

Beam

Beam Terra 800 Manual de usuario

Sailmon

Sailmon E4 Manual de usuario

AUTOHELM

AUTOHELM ST50 PLUS Manual de instrucciones

ASTRO

ASTRO X-5 twin B Manual de usuario

Garmin

Garmin GPS 16 Series Guía de referencia

Iridium

Iridium EXTREME Manual de usuario

Satcube

Satcube Ku Manual de usuario

Thuraya

Thuraya ATLAS IP+ Manual de usuario

Radio Zeeland DMP

Radio Zeeland DMP Sigma 120 Manual de usuario

METRACKCO

METRACKCO SVT600/T1/T3 Manual de usuario

Garmin

Garmin GPSMAP 190-01120-00 Manual de usuario