Marantz AV7702mkg Manual de usuario
AV Pre Tuner
AV7702mkg
Bitte zuerst lesen... / Lisez-moi en premier.... / Nota preliminare.... /
Lea esto primero.... / Lees mij eerst... / Läs detta först... /
Прочитайте в первую очередь... / Przeczytaj to najpierw....
Quick Start Guide
Read Me First....
Kurzanleitung / Guide de démarrage rapide / Guida di Avvio Rapido /
Guía de inicio rápido / Snelhandleiding / Snabbstartsguide /
Краткое руководство пользователя / Skrócona instrukcja obsługi
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
SVENSKA
РУССКИЙ
POLSKI
1
Thank you for choosing a Marantz Pre
Tuner. This guide provides step-by-step
instructions for setting up your Pre Tuner.
Please do not return this unit to the
store – call for assistance.
If you need help… :
If you need additional help in solving
problems, contact Marantz customer
service in your area.
www.marantz.com
Welcome Before You Begin
Required for Setup
TV RCA cables XLR cables
HDMI cable Power amplifier Speaker systems /
Speaker cables
Optional
LAN cable Wi-Fi router
• When connecting this unit to a device that is compatible with the Deep Color, 4K and ARC
functions, use a “High Speed HDMI cable with Ethernet” that displays the HDMI logo.
• These drawings are for illustrative purposes only and may not represent the actual product(s).
or
or
2
What’s In the Box
Quick Start Guide FM indoor antenna
Owner’s Manual AM loop antenna
Safety Instructions Sound calibration
microphone
Notes on radio Sound calibration
microphone stand
Cable labels Remote control unit
Pre Tuner R03/AAA batteries
Power cord External antennas
for Bluetooth/
wireless connectivity
The supplied Sound calibration microphone stand is convenient for use when
performing Speaker Calibration. Using your own tripod or the supplied Sound
calibration microphone stand enables settings to be automatically configured to
the optimum listening environment, providing exceptionally high performance.
3
Important: External Antennas
The removable external antennas are required for both
Bluetooth and Wireless network connectivity. Please make
sure to connect the antennas before attempting to use the
Bluetooth or Wi-Fi features of the AV7702mkg.
nConnecting the external antennas for
Bluetooth/Wireless connectivity
For each of the two antennas:
q
Place the antenna evenly over the antenna terminal
located at the upper left or right corner of the rear panel.
w
Turn the antenna clockwise until it is fully connected. Do
not over tighten.
e
Rotate the antenna upwards for the best possible reception.
q w e
4
1Installing batteries in the
remote control unit
R03/AAA batteries
There are three steps to the setup
process.
1Installing batteries in the remote control unit
2Connecting the Pre Tuner, Power Amplifier
and your TV
3Following the On-Screen Setup Assistant
Setup
5
2Connecting the Pre Tuner, Power Amplifier and your TV
2.1) Place the Pre Tuner and Power
Amplifier near your TV and connect
the power cord.
TV
Pre Tuner
Power Amplifier
TV
Pre Tuner
Power cord
(supplied)
Connect to household
power outlet
(AC 230 V, 50/60 Hz)
6
2.2) Connect to the network.
Wired LAN
When connecting cables (wired connection), connect a LAN
cable between your Pre Tuner and your network router.
Internet Modem
Router
To WAN side
To LAN port
Wireless LAN
When connecting to wireless LAN (Wi-Fi), follow the
instructions in “Connecting the external antennas for
Bluetooth/Wireless connectivity” and connect the antennas.
Router with
access point
To WAN side
Internet Modem
7
2.4) Turn on the TV.
TV remote control unit
2.5) Select the appropriate HDMI input
on your TV.
HDMI TV/
VIDEO
INPUT or
TV remote control unit
2.3) Connect the Pre Tuner to your TV
with an HDMI cable.
(ARC)
HDMI IN
(ARC)
HDMI OUT
MONITOR 1
HDMI cable
Pre Tuner (Rear panel)
ARC (Audio Return Channel) :
If your TV supports ARC, your TV can send audio back to the AV pre tuner
when you are using your TV’s built-in video sources (TV tuner, Smart TV
streaming services, etc…) ARC requires that you enable HDMI CEC on
your TV. Please refer to your TV’s Owner’s Manual for instructions on how
to setup HDMI CEC. Note that some TV manufacturers use other names
for the HDMI CEC function.
8
2.6) Turn on the Pre Tuner.
• Press Xto turn on the Pre Tuner.
2.7) Verify the connection.
• Verify that you can see this screen on your TV.
AV Preamp Setup Assistant
Please select a language...
Deutsch
Français
English
Italiano
Español
Nederlands
Svenska
Pусский
Polski
If this screen is not displayed, please go back and
retry the steps again in the recommended sequence.
9
3Following the On-Screen Setup Assistant
The Setup Assistant will walk you through connecting and
configuring your Power Amplifier and components to your
Marantz Pre Tuner. Please use the remote control and
follow the on-screen instructions.
AV Preamp Setup Assistant
Please select a language...
Deutsch
Français
English
Italiano
Español
Nederlands
Polski
Pусский
Svenska
Otros manuales para AV7702mkg
1
Tabla de contenidos
Otros manuales de Sintonizador de Marantz
Marantz
Marantz ST7001 Manual de usuario
Marantz
Marantz 105 Manual de usuario
Marantz
Marantz AV7701 Manual de usuario
Marantz
Marantz ST7001 Instrucciones de instalación y funcionamiento
Marantz
Marantz AV7704 Manual de usuario
Marantz
Marantz ST551 Manual de usuario
Marantz
Marantz ST-15S1 Manual de usuario
Marantz
Marantz ST-55 Manual de usuario
Marantz
Marantz 105B Manual de usuario
Marantz
Marantz AV7703 Manual de usuario
Marantz
Marantz DV110 Manual de usuario
Marantz
Marantz AV7706 Manual de usuario
Marantz
Marantz ST-17 M Manual de usuario
Marantz
Marantz AV7702 Manual de usuario
Marantz
Marantz AV7702mkII Manual de usuario
Marantz
Marantz AV8802A Manual de usuario
Marantz
Marantz ST-17 Manual de usuario
Marantz
Marantz 120 Manual de usuario
Marantz
Marantz AV9000 Manual de usuario
Marantz
Marantz ST440 Manual de usuario
