ENGLISH
FRAN~AIS
ESPANOL
Introduction Introduction
SafetyPrecautions
SAFETY
INSTRUCTIONS
Laser
Safety
13.
Power-Cord Protection -Power-supply cords should be routed
so
that
they are
not likely
to
be walked on or pinched by items placed upon oragainst them,
paying particular attention
to
cords at plugs, convenience receptacles, and
the
point
where they exit from the product.
14.
Outdoor Antenna Grounding
-If
an
outside antenna orcable system
is
connected
to
the product, be sure theantenna orcable system
is
grounded
so
as
to
provide some protection against voltage surges and built-up static charges.
Article 810
of
the National Electrical Code,
ANSI/NFPA
70,
provides information
with
regard
to
propergrounding
of
the mastand supporting structure,
grounding
of
the lead-in wire
to
an
antenna discharge unit,
size
of
grounding
conductors, location
of
antenna-discharge unit, connection
to
grounding
electr~des,
and requirements forthe grounding electrode.
See
Figure
A.
15.
lIghtnmg
-For added protection for this productduring alightning storm, or
when it
is
leftunattended and unused for long periods
oftime,
unplug
it
from the
wall outlet.This will preventdamage
to
the productdue
to
lightning and power-
line surges.
16.
Power lines -
An
outside antenna system should not be located in
the
vicinity
of
overhead power lines orother electric
light
or powercircuits, or where
it
can
fall
into such power lines orcircuits. When installing
an
outside antenna system,
extreme care should betaken
to
keepfrom touching such powerlines orcircuits
as
contact
with
them
might
be fatal.
17.
Overloading -Do
not
overload wall outlets, extension cords, or integral
convenience receptacles
as
this
can
result in arisk
of
fire orelectric shock.
18.
Object and Liquid Entry -Neverpush objects
of
any kind intothis
product
through
openings
as
theymaytouchdangerousvoltage pointsorshort-outparts
that
could result in afire orelectric shock. Never spill liquid
of
any kind on the
product.
19.
Servicing -Do not
attempt
to
service this productyourself
as
opening
or
removing covers mayexpose you
to
dangerousvoltage orother hazards. Refer all
servicing
to
qualified service personnel.
20.
Damage Requiring Service -Unplug this product from the wall
outlet
and refer
servicing
to
qualified service personnel under
the
following conditions:
a)
When
the
power-supply cord or plug
is
damaged.
b)
If
liquid
has
been spilled,
or
objects have fallen
into
the product.
c)
If
the
product
has
been exposed
to
rain or water.
d) If
the
product does
not
operate normally byfollOWing
the
operating
instructions. Adjustonly those controls that are covered by the operating
instructions
as
an
improperadjustment
of
other
controls may result in
damage and will often require extensive
work
by
aqualified technician
to
restore
the
product
to
its normal operation.
e)
If
the
product
has
been dropped
or
damaged in any way.
f) When the product exhibits adistinct change
in
performance -this indicates
aneed for service.
21.
Replacement
Parts
-When replacement parts are required, be sure
the
service
technician
has
used replacement partsspecified by
the
manufacturer
or
have
the
same characteristics
as
the original part. Unauthorizedsubstitutions mayresult in
fire, electric shock, or
other
hazards.
22.
SafetyCheck -Upon completion
of
any service or repairs
to
this product,
ask
the
service technician
to
perform safetychecks to determine
that
the
product
is
in
properoperating condition.
23.
Wall orCeiling
Mounting
-The product should be
mounted
to
awall
or
ceiling
only
as
recommended by the manufacturer.
24.
Heat -The productshould be situated away from heat sources
such
as
radiators,
heat registers, stoves, orother products (including amplifiers) that produce heat.
ANTENNA
DISCHARGE
UNIT
NEe
SECTION
81
0-20)
ROUND
cONDueroRs
{NEC
SECTION
810-21)
GROUND
ClAMPS
....-
POWER
SERVICE
GROUNDING
NEe
-
NATIONAL
ELECTRICAL
CODE
Z~~~R~~~~~;~~
H)
1.
2.
7.
3.
4.
5.
FIGURE
A
EXAMPLE
OF
ANTENNA
GROUNDING
AS
PER
NA
nONAl
ElEURICAl
CODE
8.
6.
9.
Read
Instructions -All
the
safety and operating instructions should be
read
before the
product
is
operated.
Retain Instructions-
The
safety and operating instructionsshould be retained for
future reference.
Heed Warnings -All warnings on the product and in
the
operating instructions
should be adhered to.
Follow Instructions -All operating and
use
instructions should be followed.
Cleaning -Unplug this
product
from the wall
outlet
before cleaning.
Do
not
use
liquid cleaners
or
aerosol cleaners.
Attachments -Do
not
use attachments
not
recommended by the product
manufacturer
as
they may cause hazards.
Water and Moisture -Do
not
use
this product near water -for example, near a
bath tub, wash bowl. kitchen sink, or laundry tub; in a
wet
basement; or near a
swimming pool; and the like.
Accessories -Do
not
place this producton
an
unstablecart, stand, tripod, bracket,
or table.
The
product
may fall, causing serious injury
to
achild or adult, and
senous damage
to
theproduct.
Use
only
with
acart, stand,
tripod, bracket,
or
table recommended by
the
manufacturer,
or
sold with
the
product. Any
mounting
of
the product should follow
the
manufacturer's
instructions, and should
use
amounting accessory
recommended by
the
manufacturer.
Aproductand cart combination should be moved
with
care. Quick stops, excessive force, and uneven surfaces
may cause the
product
and cart combination
to
overturn.
10.
Ventilation -Slots and openings in
the
cabinet are
provided for ventilation and
to
ensure reliable operation
of
the product and
to
protect
it
from overheating, and
these openings must
not
be blocked orcovered. The
openings should never beblocked by placing the producton abed,
sofa,
rug, or
other similar surface. This productshould
not
be placed in abuilt-in installation
such
as
abookcase or rack unless proper ventilation
is
provided orthe
manufacturer's instructions have been adhered to.
11.
Power Sources -This productshould
be
operated onlyfrom the type
of
power
source indicated on the marking label.
If
you are
not
sure
of
the type
of
power
supply
to
your home, consult your product dealer or local
power
company. For
products intended
to
operate from battery power, or othersources, refer
to
the
operating instructions.
12.
Grounding or Polarization -This product may be equipped
with
apolarized
alternating-currentline plug
(a
plug having oneblade widerthan
the
other).This
plug will fit
into
the
poweroutletonly one way. This
is
asafetyfeature. Ifyou are
unable
to
insert
the
plug fully into the outlet,
try
reversing the plug. Ifthe plug
should still fail
to
fit, contact your electrician
to
replace your obsolete outlet. Do
not
defeat
the
safety purpose
of
the polarized plug.
A
The
lightning flash
with
arrowhead symbol, within
an
equilateral
triangle,
is
intended
to
alert the user
to
the presence
of
uninsulated "dangerous voltage"
within
the
product's enclosure
that maybe
of
sufficient magnitude
to
constitute arisk
of
electric
shock
to
persons.
The
exclamation
point
within
an
equilateral triangle
is
intended
to
alert the user
to
the presence
of
important
operating and
maintenance (servicing) instructions in
the
literature
accompanying the appliance.
A
A
WARNING:
TO
REDUCE
THE
RISK
OF
FIRE
OR
ELECTRIC
SHOCK,
DO
NOT
EXPOSE
THIS
APPLIANCE
TO
RAIN
OR
MOISTURE.
CAUTION:
VISIBLE
AND
INVISIBLE
LASER
RADIATION
WHEN
OPEN.
DO
NOT
STARE
INTO
BEAM.
LOCATION:
INSIDE,
NEAR
THE
DECK
MECHANISM.
CAUTION:
USE
OF
CONTROLS
OR
ADJUSTMENTS
OR
PERFORMANCE
OF
PROCEDURES
OTHER
THAN
THOSE
SPECIFIED
HEREIN
MAY
RESULT
IN
HAZARDOUS
RADIATION
EXPOSURE.
THIS
PRODUa
SHOULD
NOT
BE
ADJUSTED
OR
REPAIRED
BY
ANYONE
EXCEPT
PROPERLY
QUALIFIED
SERVICE
PERSONNEL.
CAUTION:
TO
REDUCE
THE
RISK
OF
ELECTRIC
SHOCK,
DO NOT
REMOVE
COVER
(OR
BACK).
NO
USER-SERVICEABLE
PARTS
INSIDE.
REFER
SERVICING
TO
QUALIFIED
SERVICE
PERSONNEL.
