Maplin N67DR Manual de usuario

Two Way Radio Watch

N67DR

This lightweight and compact wrist watch style PMR446 radio can be operated

conveniently with a simple flex of your wrist. Its ideal to stay connected with family

or friends at parks, camping holidays, sporting events, music concerts. Virtually any

indoor or outdoor activity where keeping in touch is important

Key features:

●Wrist Watch Style with adjustable strap

●8 standard PMR446 channels

●38 CTCSS and 83 DCS privacy tones

●Up to 6KM Range

●Scrambler function

●Compander function

●TOT function

●Power off resume

●Low battery checking

●Auto Squelch

●Auto Battery Saving

●Internal VOX (3 adjustable voice volume)

●Channel Scan

●Digital clock(12/24 Hour mode)

●10 mode of call tone

●Reminding tone after transmission over

●LCD Display

●Lithium-Ion Battery with charger

SPECIFICATIONS

Power Source 3.7V/650mAHLithium-Ion Battery

Output Power (TX) 0.5W ERP maximum

Range Up to 6.0 Kilometres in open conditions, without

obstacles

Read this manual carefully and you’ll get the most out of your two way wrist

watch PMR.

LCD Screen

1. Channel Number, Displays current channels

2. CTC: display 38 CTCSS/83 DCS sub-channel

3. Battery Level indicator: display battery status

4. Time: will display time mode

5. Channels: Display channels

6. Volume level: Adjustable 8 volume level

7. Receive Indicator (RX)-Indicates when unit is receiving transmissions

8. Transmit Indicator (TX)-Indicates when unit is transmitting.

9. Channel scan

10. Alarm clock

11. Call Tone Transmission (CALL)-Indicates When unit is paging.

12. Key lock: it displays when lock key

13. VOX-Indicates when unit is in VOX mode

14. Date: displays Year/month/date

15. AM/FM: If time is 12Hour mode, will display AM/FM

16. Week: displays week

Buttons and Controls

17. Scan-Press to enter Channel Scan.

18. MIC-Built-in microphone

19. Speaker-Built-in speaker

20. Power/Menu (Multi Function)-Press and hold to turn unit ON/OFF. A quick,

single press accesses the Menu and Watch setting mode

21. Antenna: when there signal is poor, to use antenna

22. & 23. Up/Down Adjusts volume level (default), channel and watch adjustments

in Menu mode

24.Red Button (Multi Function) – Press and hold to transmit a voice communication

CARE AND SAFETY

Never open the case of your device, there are no user serviceable parts inside.

Yo u r d evice may interfere with TVs or radios, even when operating properly. To

determine whether your PMR is causing interference, simply turn it off. If the

interference stops, your device is causing it. Try to eliminate interference by moving

your PMR away from the receiver.

Hazardous Environments

Do not operate the PMR in hazardous environments, explosion or fire may result.

Do not operate the PMR near unshielded electrical blasting caps. Under certain

conditions, PMR radios can interfere with blasting operations and may cause an

explosion.

Cleaning

To cl ea n yo ur PMR Watch, use a soft cloth dampened with water.

Use a dry, lint-free cloth to clean the battery contacts.

Do not submerge the unit in water. If the unit gets wet, turn it off and remove the

battery immediately. Dry the battery compartment with a soft cloth to minimize

potential water damage. Leave the battery compartment cover off overnight to

ensure complete drying. Do not use the PMR until the unit is completely dry.

To maintain good communication quality, hold the transmitter at least 2inches (5

centimetres) from your mouth and speak in a normal voice.

BATTERY INSTALLATION

Yo u r PMR is powered by a Lithium-Ion Battery (included).To install and

replace battery:

1.Release the battery compartment cover latch located on the rear side of the unit,

and remove the cover from compartment.

2.Install the Lithium-Ion battery into the battery compartment correctly, observing

polarity markings An incorrectly installed battery can prevent the unit from

operating.

3. Replace the cover and lock the battery compartment cover latch into position

4. Do not use any battery other than that supplied, failure to observe this could

cause personal injury or damage to the watch

Battery

Compartment

Cover Latch

Battery

Compartment

Cover

CHARGING THE BATTERY

Caution：Do not use charger before inserting battery

Yo u r PMR watch comes with an A/C Adapter charger to charge your Lithium-Ion

battery.

1. Lift the Headset/Charger Jack Cover located on the side of your unit

2. Connect the A/C adapter charger into a mains outlet

3. Insert the A/C Adapter Charger into the Headset/Charger Jack.

4. During charging the Low Battery Level icon will appear on the display, and will

disappear once the battery is fully charged .

NOTE:

Charge the battery for approximately 6 hours before initial use.

Normal charge time is 3 hours .

Headset/Charger

Jack Cover

BATTERY LEVEL AND LOW BATTERY OPERATION

In Watch and Communicator Mode the Low Battery Level icon will not appear on the

display unless the unit detects that the battery is low. When the unit is in

Communicator Mode and the battery level is low the icon will appear for

approximately 15 seconds and then will automatically change to Watch.

NAVIGATING THROUGH THE MENU

To ac ces s th e adv an ce fe atu re s , y o u r PMR has a Menu with two functions.

Watch Mode

1.To enter or exit watch Mode, press the Power key for around 3 seconds. A long

keybeep tone is made (after a short keybeep tone) when the unit goes into Watch

Mode and the LCD will display the time segments and battery icons for the watch.

Communication Mode.

1. Your PMR will automatically go to communicator Mode once the battery is installed,

the watch segments and channel icons will be displayed on the LCD during this

mode. Press the Menu key for about 3 seconds to enter the Watch Setting Mode;

a short keybeep tone is made when the Time Setting mode is engaged.

2. In Communicator Mode, pressing the Menu key for no longer than 1 second will

advance you through the menu until exiting to communicator mode.

3. Menu mode exits and the PMR returns to standby mode when the Menu key is

pressed on the last selection.

4.The unit automatically enters Watch mode in 10 minutes..

Menu Key

Watch Mode

Communication

Mode

Channel

Minutes(Watch)

Hours (Watch)

VOX….

NOTE: In Watch Mode, no button/key will function unless pressing menu key for

about 3 seconds to enter Communication Mode

To se t the T im e（watch mode）

Yo u r PMR has a 12/24-hour Time Clock, which can be set as follows:

1. In Communication mode, enter to Menu mode by pressing the Menu key until a

short keybeep tone is heard. When the time Setting mode is engaged, the Hour

segment in the LCD Display will flash.

2. Press the Menu button 7 times, screen will display 12/24-hour mode setting, by

press Sbutton to start to set, press Up or Down key to select 12 or 24H mode.

To pr es s Sbutton to confirm, if you choose 12H mode, screen will display AM/PM.

3. Date setting: By press Menu button 2 times, screen will display 00 01

01(year/month/date), by press S button to select year/month/date, press UP,

Down

button to select date, press Sbutton to confirm setting.

4. Time setting: by press Menu button 3 times, screen will display 12 00 00,

(hour/minute/second), by press S button to select hour/minute/second, by press

UP, Down button to adjust time , to press S button to confirm setting. when

setting time, screen will display AM or PM if time mode is 12hour mode.

3. Stopwatch setting: press MENU button 4 times, screen will display stopwatch

mode 00 00 00, to press PTT button to start time count; time count can pause

by pressing PTT again; to continue time count by press MENU button again; by

press UP, DOWN button for zeroing,

4. Clock countdown setting: Press MENU button 5 times, screen display clock

countdown mode 00 00 00 (minute/second/millisecond), to press S button to

select minute/second/millisecond and press UP, DOWN button to select time then

press S button to confirm setting; by press PTT button to start countdown, press

PTT again to make countdown pause and to press PTT continue to countdown.

5. Alarm clock setting: press MENU button 6 times, enter alarm clock mode. Screen

displays OF and clock icon. Press PTT button to set alarm clock mode 12 00

00(hour/minute/second), press Sbutton to select hour/minute/second and

press UP, DOWN button to adjust time, press Sbutton to confirm setting, then

screen will display alarm clock icon, when time is up, alarm clock will ring. Exit the

alarm clock mode by press any button.

6. Key lock setting: under the watch mode, by press menu button once and press S

button quickly to lock all button; under the communication mode, long time press S

button to lock all buttons except the PTT button, repeat the process to unlock.

Choosing Frequency and Sub-tone Channels

Yo u r PMR has 8 base frequencies and 38 groups of CTCSS sub-tones, 83 groups

of DCS sub-tones for each base frequency.

If tones are selected, you can improve privacy and unwanted signals on your channel.

Only PMR radios using the same frequency and sub-tone will be heard

1. Frequency setting: under communication mode, press the menu button once, the

signal code keep flashing in screen, to press UP, DOWN button to adjust base

frequency, press PTT button to confirm setting.

2. CTCSS setting: Press the MENU button 2 times, CTC code keeps flashing, press

the Up or Down button to select 38 group of sub-channel from 1 to 38 channels,

and screen will display CTC character under CTC code, press PTT button to

confirm setting. CTC code Default setting is 00 when power on..

3. DCS setting: press the MENU button 2 times, CTC code will keep flashing, press

the UP or Down button to select 83 group of DCS sub-channels from 1 ~83,

press PTT button to confirm the setting, there is no CTC character displayed in

screen under CTC code, CTC code Default setting is 00 when power on

Additional Features:

Scrambler setting

Press the MENU button 7 times, the screen will display SC OF, character OF will

flash, press UP or Down button to choose ON or OFF, press PTT to confirm setting.

Default SC setting is on.

Compander setting

This feature improve the audio heard over transmissions where signals are weak.

Press the MENU button 6 times, the screen will display CP on, character on will

flash, press UP or Down button to choose ON or OF, press PTT button to confirm

the setting

TOT setting

This limits the time of transmission, ideal where there is a need to keep signals short

Press the MENU button 8 times, the screen will display Lo OF, character OF keeps

flashing, press the UP or Down button to choose 30 second, 60 second and OF,

press PTT button to confirm setting, default setting is on when power on

(if you select 30 second, transmission will be stopped automatically once your PTT

transmission time is more than 30 seconds)

Channel Scan

To sc an th e wh ol e ch an ne ls of t he PMR for radio users on the PMR446 band:

1. Press the Scan key found on the side of the unit. The unit will start to rapidly scan

the channels of the PMR for any activity. The unit will pause on an active channel

for 4~5seconds before resuming Scan function.

2. To exit the Scan mode, press the Red button.

CALL TONE setting

Press the Menu button 4 times, screen will display CALL character, 01 keeps

flashing, press UP or down button to select call tone from 01~10, press PTT button

to confirm call tone setting. Default setting for call tone is 01

There are 10 mode call tones in this radio, you and your group can use the call tones

to communicate separately

Power save setting

Yo u r PMR has a unique circuit designed to dramatically extend

battery life

Press the menu button 5 times, screen will display PS OF character, OF keeps

flashing, press UP or Down button to choose ON or OF, press PTT button to

confirm setting. Default power save setting as OF,

8 level of volume setting

Under communication mode, press UP or Down button to adjust volume level from

1~8

Background LCD light

Under the mode of watch and communication, when pressing any button the LCD will

be light up for 5 seconds.

Low battery indication

Under mode of communication, when the battery voltage drops to 3.4V, the LCD

screen will display 1 level for battery voltage, and the unit will enter watch mode

automatically after 10 minutes if recharging is not started.

Transmitting and Receiving

To us e yo ur PMR to communicate with others:

1. In Communicator Mode, the unit is continuously in RECEIVE mode.

2. Press and hold the Red Button and speak as you would normally, holding the

microphone about 5cm away from your mouth.

3. When you are finished speaking, release the Red Button. You are now ready to

receive incoming transmissions. While receiving transmission, the R X icon

appears on the display.

Sending a Call Alert Tone

To se nd a C al l Al ert To ne , Pr es s th e Re d Bu tt o n t wi ce in a r ap id a cti on . Th e Ca ll A le rt

Ton e wi ll b e au to mat ic al ly transmitted for a factory-set length of time. During

transmission, the Call icon appears on the display. You’ll hear a brief Call Alert Tone

to confirm operation. The PMR returns to standby mode when the Call Tone

sequence is complete. For optimum performance, make sure the ANTENNA is

pointing upright.

VOX setting (Voice Operated Transmission)

Your PMR is equipped with an adjustable Voice Operated Transmitter (VOX) that can

be used for automatic voice transmission. In this convenient mode, transmission is

automatically initiated by speaking into the microphone. There is no need to push the

Red Button.

Press the MENU button 3 times, the screen will display VX character, OF keeps

flashing, press UP or Down button to choose on or off.

Press UP or Down button to select voice level( from 1 to 3 level) , press the PTT

button to confirm setting.

To get full advantage of hands free transmission and privacy in your conversation,

you can optionally use the Ear Bud with Microphone in conjunction with the VOX

feature of your PMR.

To us e th e Ear B ud :

1. Set your PMR to VOX Mode

2. Lift the headset/Charger jack Cover Located at the side of your unit

3. Insert the Ear Bud Jack into the headset Jack. Wear the Ear bud and adjust the

Microphone location

The Auto Squelch Feature

Yo u r PMR is equipped with an automatic squelch system that automatically cuts off

weak transmissions and unwanted noise due to terrain conditions and range

limitations.

Tabla de contenidos

Manuales populares de Radio bidireccional de otras marcas

Midland

Midland 70-1526A/B Manual de usuario

HYT

HYT TC700 Manual de usuario

DNT

DNT Space100 Manual de usuario

Legacy

Legacy ProLine Series Manual de usuario

Evolveo

Evolveo FreeTalk XM2-2 Manual de usuario

AWC

AWC AWR1688+ Manual de usuario

Motorola

Motorola XT665d Manual de usuario

Cobra

Cobra 2-Way Radio Manual de usuario

Klutch

Klutch KR-400 Manual de usuario

Garmin

Garmin Rino 655t Manual de usuario

Motorola

Motorola TLK 150 Manual de usuario

Midland

Midland MXT275J Manual de usuario

Titan

Titan TR200 Manual de usuario

Cobra

Cobra CXT645 Manual de usuario

Tait

Tait TM9100 Manual de usuario

Yaesu

Yaesu FT-65R Manual de usuario

RELM

RELM RP3000 Manual de usuario

Motorola

Motorola ASTRO SRX 2200 Series Manual de usuario