Manson Engineering Industrial NEP-8323 Manual de usuario

NEP-8323, NEP-8186 user

manual

NEP-8323, NEP-8186 user manual

2 / 21

Table of contents

Precautions ...................................................................................................... 3

Accessories ....................................................................................................... 5

Introduction ...................................................................................................... 6

Specifications .................................................................................................... 7

Operation video ................................................................................................. 7

Indications ........................................................................................................ 8

Front Panel ................................................................................................... 8

Back Panel .................................................................................................... 9

AC Voltage Selection .................................................................................... 10

Operation Procedures ....................................................................................... 11

Basic operation ............................................................................................ 11

Connection and Operation ............................................................................ 12

Connect 3 outputs .................................................................................... 12

Connect 3 outputs in series ....................................................................... 13

Remote Programmable control ...................................................................... 14

Front Panel Menu ......................................................................................... 15

Wave Form Generation ................................................................................. 17

NEP-8323, NEP-8186 user manual

3 / 21

Precautions

PRECATUIONS

Keep this manualina safe place for quick reference at alltimes.

This manual contains important safety and operation instructions for correct use of the

power supply.Read through the manual and payspecial attentionto the markings and

labels of this unit and equipment to be connected.

Payspecial attentionto these two types of notices used inthis manual

WARNING:

Failure to observe this Warning may cause injury to persons and

damage to power supply or connected equipment

CAUTION:

Failure to observe this caution may result in damage to equipment

and Improper functioning of the power supply.

Warning :

1. Do not use this power supplynear water.

2. Do not operate or touch this power supply with wet hands.

3. Do not openthe casing of the power supplywhen it is connected to ac mains.

4. Refer all servicing to qualified service personnel only.

5. Before replacing theAC fuse atAC socket, find out and clear up the cause first.

6. Replace theAC fuse withthe same type and rating as the original fuse.

Caution :

1. Use a grounded 3 pinAC source.

2. This unit is for indoor use only.

3. Do not operate or place this unit ina humid, dusty, indirect sunlight locationor near any

heat source.

4. Before plugging into localAC mains, check withthe rating labelat the back of the unit.

5. Do not block anyventilationopenings of the unit.

6. This unitmust be used withinthe specified rating,regular excessive continuous loading

maycause damage to the power supply.

7. The gauge size of input power cable must be atleast0.75mm2 and the total length of

power cable must not exceed 3m.

No part of this publication maybe reproduced,or transmitted inanyform or byanymeans

without the writtenpermissionfrom MansonEngineering Industrial Ltd.

Changes inthe manual.

MansonEngineering Industrial Ltd.has the right to update and change the content of this

manual without anyprior notice and obligation.

NEP-8323, NEP-8186 user manual

4 / 21

Disclaimer

Exclusions for documentation, Indemnityand Product application.

Manson Engineering Industrial Ltd. (Manson)

1. Assumes no warrantyto the accuracy,suitabilityof technical informationgiveninthe

user manuals or other documentation.

2. Undertakes no responsibilityor liabilityof losses,damages and related expenses

whether specific, direct, indirect consequential or accidental whichmight result from the

use of informationgiven in this manual.

3. Shall not be liable to anyone foranyspecial, collateral, incidental orconsequential

damages inconnectionwith orfrom the use of these Mansonproducts.The sole and

exclusive liabilityto Manson, regardless of the form of actionshall not exceed the

purchase price of the Mansonproduct.

NEP-8323, NEP-8186 user manual

5 / 21

Accessories

NEP-8323, NEP-8186 user manual

6 / 21

1. AC Power Cord

2. USB cable

3. Output cable with crocodile clip

Introduction

This new series of low noise, good voltage & current regulationprecision laboratorygrade

linear supplymerges withthe advanced MCUcontrol and PC interface via USB and

optional Ethernet .

It is ideal for noise sensitive applications ; communication, audio visual , measuring

devices .The MCU control with10 Step Wave Form generator withcyclic operationmakes

working & testing DUT ever so convenient.

Key Features

·The large LED displayshows the vital status & the two 4 digit voltage and current

meters .

·The variable output has 10mV and 1mAresolution.

·There are 3 user defined presets inthe responsive Touch-Feelscreen.

·There are 3 isolated fixed voltage outputs and a main variable output withrotary

encoder volumes .

·An output On-Off switchmakes setting the output values safer and easier .

·The cyclic waveform generationis programmable and operated using front panel

controls without PC.

It is bundled withthe PC Controlsoftware , USB drivers , SCPIcommand sets for remote

control programming , monitoring , and data logging or integrationwithtest instruments via

SCPI.

NEP-8323, NEP-8186 user manual

7 / 21

Specifications

Models NEP-8186 NEP-8323

Variable Output Voltage 0.1 - 18VDC 0.1 - 32VDC

Variable Output Current 0 - 6A 0 - 3.5A

Voltage Regulation

Load (10-90% Rated Current) £10mV

Line (±10% Variation) £5mV

Current Regulation

Load (10-90% Rated Voltage) £3mA

Line (±10% Variation) £2mA

Ripple & Noise (r.m.s) £5mV

Auxiliary Fix output

Aux. 1 output 5mVDC/3.3VDC (Selectable), 0.8A

Aux. 2 output 12VDC, 0.8A

Tracking Over Voltage

Protection O/P ≤5V : Set voltage +1V

O/P > 5V : Set voltage x 120%

Voltage Setting Resolution 10mV

Current Setting Resolution 1mA

Meter Type & Accuracy

Voltage Meter 4 Digit LED Display (±0.5% +5digits, <10) (±0.5% +2digits ≥10V)

Current Meter 4 Digit LED Display (±0.5% +5digits, <0.5A) (±0.2% +2digits >0.5A)

Input Voltage 115/230VAC

Full Load Input Current £1.1A@230VAC

Cooling Method Thermostatic Control Fan (0 to full speed)

Protections Overload, Short Circuit by Constant Current,

Output Tracking Over Voltage,Over Temperature

Special Feature 3 User defined V & I preset,Remote V, I, & output on-off

Presets Cycle Programming 10 steps waveform generator Max. preset cycle 999

Commend Set SCPI

Communication Types USB (bundle); Ethernet (Optional)

Approvals CE EMC: EN 55011, 55022 LVD: EN 60950, 61010

Dimensions (WxHxD) 151x132x260mm

Weight ~5.1kgs

·All values are based on the Standard ambient Temperature 25°C and Pressure 0.1Mpa.

·SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE

Operation video

General Operation

UVL, UCL Setting

USB, LAN, LED brightnes setting

NEP-8323, NEP-8186 user manual

8 / 21

dvdt Waveform Generation setting

Run & Stop dvdt waveform

Factory reset

Indications

Front Panel

1 - MainPower Switch

2 - Output ON/OFF button

3 - Preset1/2/3 selectionand LED indication

4 - Mainoutput Current limit adjust knob and Menuentry

5 - Mainoutput Voltage limit adjust knob

6 - C.V./C.C. mode indication

7 - Ammeter

8 - Voltmeter

9 - Remote control indicator

10 - AuxiliaryOutput 5V indicator

11 - Wave Form generationcycle running indicator

12 - Adjustable MainOutput

NEP-8323, NEP-8186 user manual

9 / 21

13 - Auxiliaryoutput 1 for 3.3V/5V

14 - Auxiliaryoutput 2 for 12V

Back Panel

1 - Auxiliary1 3.3V/5V selection

2 - USB Remote Control port

3 - Cooling Fan

4 - Ethernet port (Ethernet model only)

5 - AC power plug

6 - AC FUSE

NEP-8323, NEP-8186 user manual

10 / 21

AC Voltage Selection

TheAC selectionswitch is locationonthe bottom of power supply.

Use a pen to switchAC voltage between115VAC and 230VAC.

Select115 forAC voltage range from 100VAC to 126VAC

Select230 forAC voltage range from 207VAC to 253VAC

Otros manuales para NEP-8323

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Fuente de alimentación de Manson Engineering Industrial

Manson Engineering Industrial

Manson Engineering Industrial HCS-3302-USB Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial HCS-3600 USB Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial HCS-3300 USB Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial SSP-9081 Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial HCS-3200 Series Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial NEP Series Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial HCS-3400 Series Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial HCS-3100 Series Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial SPS-9620 Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial SPA-8330 Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial NTP-5521 Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial ZVS-8350 Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial HCS-3404 Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial SPA-8230 Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial HCS-3400-USB Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial SDP Series Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial SPA-8150 Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial HCS Series Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial ZVS-8354 Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial SSP-9081 Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial NTP-6521 Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial KPS-6000 Series Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial HCS-3202 Manual de usuario

Manson Engineering Industrial

Manson Engineering Industrial NEP-8323 Manual de usuario

Manuales populares de Fuente de alimentación de otras marcas

Monacor

Monacor PS-12CCD Manual de usuario

VOLTIMA

VOLTIMA MagicBox 15 Manual de usuario

Agilent Technologies

Agilent Technologies 6032A Manual de usuario

Miller

Miller Auto Deltaweld 452 Manual de usuario

BCP

BCP PUOUBK Hoja de instrucciones

HC 2210 Manual de usuario

Puls

Puls CT5.241 Manual de usuario

OCZ

OCZ ZX1250W Manual de usuario

iseg

iseg ECH 238 Manual de usuario

Power

Power XXL A Series Manual de usuario

Agilent Technologies

Agilent Technologies 6631B Manual de usuario

Renogy

Renogy PHOENIX 300 Manual de usuario

HP 6200B Manual de servicio

Epson

Epson Stylus Scan 2500 Manual de funcionamiento

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Manual de usuario

Puls

Puls MiniLine ML50.100 Manual de usuario

Puls

Puls AS-Interface SLA4.100 Manual de usuario

Kenwood

Kenwood PS-60 Manual de usuario