Makita LS711D Manual
TECHNICAL INFORMATION
Models
Description
New Tool
CONCEPTION AND MAIN APPLICATIONS
LS711D
190mm (7-1/2") Cordless Slide Compound Saw
LS0711D is the 18V Cordless version of LS0711
(190mm Cordless slide compound saw) developed for works
at the site far from A/C supplies, taking after the benefits of LS0711.
Vertical vise 1
Lock-off button(spare) 2
Dust bag 1
Chip saw blade190 1
Holder metal fittings 2
Box wrench 10 1
Set square(triangle) 1
Holder assembly
Horizontal vise
Set plate
Holder fitting set (for long stock)
Chip saw blade(various types)
Battery 1822(Ni-Cd,18V,2.0Ah)
Battery 1833(Ni-MH,18V,2.0Ah)
Fast charger DC1801
50mm(2")X182mm(7-1/8")
50mm(2")X127mm(5")
35mm(1-3/8")X182mm(7-1/8")
35mm(1-3/8")X127mm(5")
550mm (21-5/8")
at 90°/45°
at 45°/45°
454mm (17-7/8")
Motor
Battery
No load speed
Blade diameter
Arbor diameter
Net weight
DC 18V magnet motor
Battery 1822(Ni-Cd,18V,2.0Ah)
2000rpm(electric brake)
180mm(7-1/8")-190mm(7-1/2")
15.88mm(5/8")
North America
Other Countries 20.0mm(13/16")
10.5Kg(23.1lbs)
Max. cutting capacities
at 90°/90°
at 45°/90°
Angle
turn base/blade Max. size of stock
454mm (17-7/8")
Specifications
Standard equipment
Optoinal accessories
Sales Points
18V cordless machine
Powerful enough to
cut interior stocks
Operative without hand pinched.
Position to which Blade descends can be
regulated on the way and it is convenient
for grooving works.
As the scale is put in front,
easier to see
Inclinable 0
°
~45 to left side
Bevel scale easy to see
Linear ball bearings are applied
for two ball each and sliding is
smooth.
Cushions are put on both ends
of sliding so that the noise may
be reduced when sliding part
and the body are hitting with
each other.
Sliding mechanism
Life-long DC motor with
replaceable carbon brushes
*Interchangeable with Model 5621D
With electric brake
Positive stop angles: Left/Right
0, 15,22.5, 30, 45
Positive clicking stop of Turn base
As scale color is different from the
background color and the scales are big,
it is very easy to see.
Angle scales easy to see
With larger contact face of base,
steady cutting available.
Base
Horizontal vice (optional)
can be attached.
Holder fitting attacheable
to left/right sides
Notch depth adjusting mechanism
Good design shape for gripping.
Gearing handle easy for carrying
Inclined lever easy to operate Angle cut
Left; up to 47
°
~Right; up to 57
(1)GREASE APPLICATION
Capacity
Working volume per full-chaged battery with tipped saw bladeof standard accessory
Stocks
Angle
Blade:right 38mm x 89mm
(2 x 4)
Crown moldings 6"
Number of stocks to cut
approx. 50pcs.
approx. 90pcs.
Repair
*"Number of stocks to cut" differs by conditions of battery and application.
Apply Makita grease on the following rotating/sliding surfaces before assembling.
Up/Down shaking fulcrum of Blade case: Blade case, Arm, Pipe16-90
Arm rotation part: Arm, Arm holder complete, ScrewM10
L/R rotating support and sliding parts of Turn base: Turnbase,
Boss in the center of base, Slide plate, Tip of Grip32
Rotating and Open/Close parts of Safety cover: Center plate,Spiral spring 26,Tip of Link plate
(2)ASSEMBLY/DISASSEMBLY OF BLADE CASE( Motor part in the body)
[Disassembly]
Remove Blade , Safety cover, and Dust nozzle before disassembling.
1) Lower fully Blade case (Motor part in the body), and push Stopper pin in.
2) Remove Hex. socket head bolt M6 fixing Link plate , and loosen Hex. socket head bolt M6x10 fixing Pipe 16-90.
3) Gripping Blade case (Motor part in the body) with hand, pull Stopper pin and raise the body slowly. Where Torsion
spring 28 does not work, pull Pipe 16-90 and take off Blade case from Arm.
[Assembly]
Reverse procedure of disassembly.
Stopper pin Hex. socket head screw M6x10 Hex.socket head bolt M6
Blade case
Pipe 16-90
Take off
Link plate
Turn base:0°
Turn base:35.3°to left
Blade:30°
(3)ASSEMBLY OF SAFETY COVER
1) Insert Spiral spring 26 into the oval hole in Safety cover , making spring's tip meet the hole.
2) Making Center washer meet four bosses in Safety cover , and attach it. (See Fig.1)
3) By putting the tip of Spiral spring 26 into Center cover hole, attach Center cover as shown in Fig. 2.
4) Attach Center plate, making it meet four bosses in Safety cover, and tighten it with Pan head screw M5.
Oval hole in Safety cover Spiral spring 26 Flat washer 5
Pan head screw M5
Spiral spring 26 Center cover hole
Center washer
Center plate
Center cover
Safety cover
Fig. 1 Fig. 2
(4)ASSEMBLY OF SQUARE ROD COMPLETE AND RING 26
1) Passing Ring 26 through Slide pipe 25-235 as in the figure, attach Arm-holder complete to Turn base complete.
2) Slide Arm-holder complete until the groove on the top ofSlide pipe 25-235 comes to the center of Turn base,
and then attach Square rod complete.
3) Attach Thumb nut 6x33 and H.socket bolt to meet the holeof Turn base and that of Ring26.
(5)ASSEMBLY/DISASSEMBLY OF TURN BASE AND BASE
1) When detaching/ attaching Turn base from/to Base, push Lock lever first.
2) Adjust the torque of Hex. lock nut M8 in the center of Turn base so that Turn base may turn smoothly without trembling.
Thumb nut 6x33
Hex. lock nut M8 Turn base
Base
Lock lever
Arm-holder complete
Ring 26
Turn base complete
Square rod complete
Rubber pin
Slide pipe 25-235
H.socket bolt
(6)ASSEMBLY/DISASSEMBLY OF POSITIVE LOCK UNIT ON TURN BASE
[Disassembly]
1) Remove Tapping screw bind CT4x12, and take off Lock plate.
2) Remove Lock lever , and pull Pin 3 out.
3) Remove Lock pin from Turn base.( Compression spring 6 also comes off simultaneously)
[Assembly]
Reverse procedure of disassembly order.
(7)ASSEMBLY OF ARM
1) Adjust torque of Hex. lock nut M10 so that Arm may slidesmoothly without trembling.
2) Attach Lever 100 that fixes Arm so that it is placed in the position as in the figure when Arm is fixed.
(8)ADJUSTMENT OF THE STRENGTH OF TORSION SPRING 28
Adjust the strength of Torsion spring 28 by tightening/loosening Hex. socket head bolt M6x10
so that the cutting head may return to the top dead center smoothly from any position.
Turn base
Lock plate
Tapping screw bind CT4x12
Lock pin
Pin 3
Lever 100
Arm
Hex. socket head bolt M6x10 Torsion spring 28
Hex. lock nut M10
Compression spring 6
Lock lever
approx.45°
Switch
White Red
Insulated
connector
Black Black
31
2
Black
Terminal(+)
Terminal(-)
Brush holer
BH
Battery holder
BH
Circuit diagram
Otros manuales para LS711D
2
Tabla de contenidos
Otros manuales de Sierra de Makita
Makita
Makita LS1013 Manual de usuario
Makita
Makita 2414DB Manual de usuario
Makita
Makita LS1440 Manual de usuario
Makita
Makita HS004G Manual de usuario
Makita
Makita DLS713RTE Manual de usuario
Makita
Makita 5603R Manual de usuario
Makita
Makita XBP01 Manual de usuario
Makita
Makita 5007MG Manual de usuario
Makita
Makita 5603R Manual de usuario
Makita
Makita SP6000 Manual de usuario
Makita
Makita LS1013F Guía de inicio rápido
Makita
Makita BSS501 Guía de inicio rápido
Makita
Makita LS800D Manual de usuario
Makita
Makita 5620DWA Guía de inicio rápido
Makita
Makita LC1230 Manual de usuario
Makita
Makita LS1030 Manual
Makita
Makita LS1214 Manual de usuario
Makita
Makita DLS211 Manual de usuario
Makita
Makita LS1016 Manual de usuario
Makita
Makita JR180DWB Manual de usuario
