Makita 9403 Manual

9403

CONCEPTION AND MAIN APPLICATIONS

Specifications

Model 9403 is a handy and convenient belt sander that inherits models

9401 and 9402. Sanding efficiency and capacity of dust collection have

been raised as well as noise and weight have been lowered.

Power consumption is 1200W,

and belt dimensions are 100mm(4") wide and 610mm(24") long.

100mm belt sander

Models No.

Description

Dust bag ass'y ---------------- 1pc.

Abrasive belt AA80 --------- 1set (5pcs.)

New Tool

TECHNICAL INFORMATION

Standard equipment

Abrasive belt, AA and CC each of #40, #60, #80, #100, #120, #150, #180, #240

Carbon plate,

Hose complete 28-1.5,

Hose complete 28-3.0,

Joint 25

Optional accessories

Continuous Rating (W)

Voltage (V) Current (A) Cycle (Hz) Input Output Max.

Output(W)

100

110

120

220

230

240

5.7

5.5

5.3

50/60

1200

520

1250

500m/min (1.640 ft/min)

100mm (4") x 610mm (24")

5.9kg (13.1lbs)

Belt speed

Net weight

Belt size

353 (13 7/8")

211 (8 3/4")

164 (6 1/2")

Power supply cord 5m (16.4ft)

Repair

(1) Replacement of armature

Unscrew tapping screws; two PT4x45 and one PT4x18 (one

CT4x40 in model 9403, and one CT4x16 in model 9921). Remove

dust collector cover and separator so that dust collector fan 80

appears.

Unscrew tapping screw CT4x16 and remove belt cover.

Take off holder cap and remove carbon brush.

Remove synchro-belt 9-354.

Turn pulley 10-24.1 clockwise and remove it.

(Note that the pulley 10-24.1 is fixed with a left-handed screw so

do not turn it counterclockwise.)

Dust collector cover

Tapping

screw PT4x18

Two tapping

screws PTx45 One tapping screw

CT4x40 for model 9403

One tapping screw

CT4x16 for model 9921

Belt cover

One tapping

screw CT4x16

Carbon brush

Holder cap

Pulley 10-24.1

Synchro-belt 9-354

(2) Removal of driving roller

(3) Caution for replacement of edge slider complete



Unscrew cross-slot pan-head screw M5x12 that fixes dust collector

fan 80, and remove fan 80.

Remove two tapping screws PT4x18 which fix dust collector

bracket so that armature can be taken off together with dust

collector bracket.



Remove belt cover and synchro-belt 9-354 with the same

procedures as the replace of armature.

Unscrew three tapping screws CT4x16 and remove gear cover.

Insert lock nut wrench 28 into two holes of helical gear 43

complete, and fix the helical gear complete. Use 24mm box

wrench to turn driving roller clockwise and the driving roller can

be removed.

When assembling edge slider complete, be sure to install it so that

the ceramic plate side will be positioned inside as shown in the figure below.

Pan-head screw M5x12

Tapping screw

PT4x18

Dust collector

bracket

Fan 80

Tapping

screw

PT4x18

Gear cover

Tapping screw CT4x16

Helical gear complete Driving roller

Lock nut wrench 28 24mm box wrench

Ceramic plate (white) Edge slider complete

Wiring diagram

[When terminal block is not used]

[When terminal block is used]

3 2

Power supply cord

Switch

Noise suppressor

Connector

Field

Terminal block

Noise suppressor is not used depending on countries.

Otros manuales para 9403

Tabla de contenidos

Otros manuales de Lijadora de Makita

Makita

Makita BO4565 Manual de usuario

Makita

Makita 9903 Guía de inicio rápido

Makita

Makita DSL800 Manual de usuario

Makita

Makita DBO484 Manual de usuario

Makita

Makita 9032 Manual de usuario

Makita

Makita GA7911 Manual de usuario

Makita

Makita B04510 Manual de usuario

Makita

Makita 9403 Manual de usuario

Makita

Makita 9032 Manual de usuario

Makita

Makita 9207SPB Manual de usuario

Makita

Makita BO5041K Manual de usuario

Makita

Makita 9924DB Manual de usuario

Makita

Makita BO4565 Manual de usuario

Makita

Makita DBO380 Manual de usuario

Makita

Makita SA7000C Manual de usuario

Makita

Makita BO6050 Manual

Makita

Makita BO5012 Manual de usuario

Makita

Makita GV5010 Manual de usuario

Makita

Makita 9227CB Manual de usuario

Makita

Makita XSB01 Manual de usuario

Makita

Makita GV5010 Manual de usuario

Makita

Makita 9237CB Manual de usuario

Makita

Makita BO4900V Manual de usuario

Makita

Makita 9031 Manual de usuario

Manuales populares de Lijadora de otras marcas

Oliver

Oliver 6305 Manual de usuario

Jet

Jet 22-44 Pro-3 Manual de servicio

Craftsman

Craftsman 351.215131 Manual de usuario

Clarke

Clarke Woodworker CBS1-5B Manual de instrucciones

Chicago Pneumatic

Chicago Pneumatic CP9778 Manual de usuario

Nitto Kohki

Nitto Kohki BB-20 Manual de usuario

Ferm

Ferm FEOS-135 Manual de usuario

Unior

Unior 1510 Manual de usuario

stayer

stayer ls1200 Manual de usuario

Jet

Jet JSG-96 Manual de servicio

Parkside

Parkside PDS 290 B2 Manual de usuario

Status

Status XPA Series Manual de usuario

Clarke

Clarke EZ Sand Manual de usuario

Craftsman

Craftsman 113.22521 Manual de usuario

Craftsman

Craftsman 113.225831 Manual de usuario

CLAS

CLAS OP 1429 Manual de usuario

Parkside

Parkside PEXS 270 Al Manual de usuario

Flex

Flex ST 1005 VE Manual de usuario