Makita VR250D Manual
VR250D
Motor Battery Fast charger
VR250DA No
VR250DWAE DC1410
Motor DC 12V magnet motor
Battery Battery 1222 (Ni-Cd,12V,2.0Ah)
Vibrations per minute l3000vpm
Amptitude
Diameter of vibrator
Length of flexible part
Net Weight
The standard equipment for the tools shown may differ form country to country.
Cordless Vibrating Poker
Battery 1222 (1 pc.)
Battery 1222 (2 pcs.)
1.1 mm(3/64")
25mm(l")
800mm(31-l/2")
2.9kg(6.4lbs)
Battery 1200,1202,1222
Fast Charger DC1209,DC1410
See the sheet attached for more information.
New Tool
TECHNICAL INFORMATION
Specifications
Standard equipment
Optional accessories
Features and benefits
CONCEPTION AND MAIN APPLICATIONS
Models No.
Description
Model VR250D is the first cordless vibrating poker in the
world. Its brief benefits are;
*Easy operation by light weight
*Anywhere without power source
Continuous operating time from a single charge is about 20
minutes.
Battery Cover ------------------------------------------1 pc.
Plastic Carrying Case (VR250DWAE only) -------1 pc.
<Note>The standard equipment may differ from country to country.
104mm(4-1/8")
187mm(7-3/8")
1031mm(40-5/8")
Light weight 2.9kg(6.4lbs)
Less fatigue in continuous operation
Battery 1222 (2.0Ah)
•can be removed easily by
pushing buttons
•Battery 1202 can be used
without set plate.
Battery Cover
protects battery from
concrete or water
Lenght of flexible part : 800mm(31-1/2")
Plastic Carrying Case
for batteries and charger
(VR250DWAE)
Space for
three spare batteries and
Fast Charger DC1410 or DC1209
Switch with waterproof cover
Diameter of vibrator : ø25mm(1")
Repair
2. Disassembling/assembling of motor
(1) Loosen the screws(2 pieces) for mounting the supporter, and remove the bearing box.
(2) Pull out the bearing from the spindle.
(3) Loosen the screws(2 pieces) for mounting the motor, and remove the motor.
For assembling, proceed (1)-(3) in the reverse order.
Note) To insert the bearing, place it to spindle flange.
Nut
Loosen
Plastic hammer
Spanner
Loosen
Plyer
Loosen Flexible wire
Motor
Screw for mounting supporter
Supporter
Screw for mounting motor
Ball bearing
Bearing box
Before repairing, completely clear the concrete from the machine, especially use care of the screws and
joint section between parts.
1. Disassembling/assembling of the body and Flexible Hose
(1)Use the plastic hammer to hit the nut holding Flexible
Hose.
(2)Use the plier to hold the caulking points on the flexible wire, use
the spanner to hold spindle, and turn it to remove.
For assembling, proceed (1)and(2) in the reverse order
Circuit drawing
3. Disassembling/assembling of the vibrator
(i) Disassembling
Use the vice to fix the monkey wrench and set the two faces of the flexible hose. Use the pipe wrench(more
than 450 mm in length) to remove the pipe.
Note) The pipe screw is left-handed one.
(ii) Assembling
(1) Place the unbalancer into the pipe.
(2) Place the rubber ring in the pipe port in parallel.
(3) Insert the rubber ring while screwing the flexible hose into the pipe.
Note 1) Use care that the rubber ring may not incline.
Note 2) Securely fasten the screws for pipe.
4. Assembling of the cap
(1) Grease the MAKITA Grease R No. 00 of 2.5 g into the cap.
(2) Apply the adhesive(Three bond 1303B) on all the circumference
of the screw and then screw into the pipe.
Note) Do not apply the adhesive on the point other than screw.
5. Lubricating points and amount of grease and oil
Excessively permeate the machine oil on the felt ring.
Evenly grease the MAKITA grease N No.2 of 1.5 g on all the face
of the flexible wire.
2 3
T+
T-
Battery holder
Red
Switch
White
Black
Red mark
DC motor
Unbalancer
Grease
Ball bearing(without seal)
Pipe
Ball bearing(with both seals)
Rubber ring
Felt ring
Flexible hose
Loosen
Pipe wrench
Vice
Flexible hose
Monkey wrench
Pipe
Otros manuales para VR250D
3
Otros manuales de Herramientas eléctricas de Makita
Makita
Makita HM1214C Manual de usuario
Makita
Makita DCG180RF Manual de usuario
Makita
Makita KP001GZ Manual de usuario
Makita
Makita M4301 Manual de usuario
Makita
Makita TW161D Manual de usuario
Makita
Makita DHR263 Manual de usuario
Makita
Makita HM0810T Manual de usuario
Makita
Makita HK1800 Manual de usuario
Makita
Makita HR4002 Manual
Makita
Makita DJS200 Manual de usuario
Makita
Makita XWT15 Manual de usuario
Makita
Makita DTW284 Manual de usuario
Makita
Makita DTW180RTJ Manual de usuario
Makita
Makita AN454 Manual de usuario
Makita
Makita XWT01Z Manual de usuario
Makita
Makita TW141D Manual de usuario
Makita
Makita DTW281RTJ Manual de usuario
Makita
Makita TW140D Manual de usuario
Makita
Makita DHG181RT Manual de usuario
Makita
Makita DJS160 Manual de usuario
