MAKINEX MS-100 Manual de usuario

MIXING STATION

MS-100

OPERATOR’S MANUAL

Rev 0919

 
TABLE OF CONTENTS 
INTRODUCTION ................................................................................................................................. 1 
DISCLAIMER................................................................................................................................... 1 
ABOUT THIS MANUAL.................................................................................................................... 2 
SAFETY INFORMATION................................................................................................................. 2 
SAFETY DECALS............................................................................................................................ 3 
PRODUCT DESCRIPTION AND SPECIFICATION............................................................................. 4 
INSTRUCTIONS FOR USE ................................................................................................................. 5 
STEP 1 –FITTING A STIRRER/ MIXER TO THE MS-100............................................................... 5 
STEP 2 –USING THE MS-100........................................................................................................ 7 
STEP 3 –POURING AND PLACING LEVELLING COMPOUND..................................................... 8 
STEP 4 –CLEANING THE MS-100................................................................................................. 9 
LIMITED WARRANTY....................................................................................................................... 10 
WARRANTY EXCLUSIONS........................................................................................................... 11 
OWNER’S RESPONSIBILITY UNDER THIS LIMITED WARRANTY ............................................. 11 
CONTACT INFORMATION ............................................................................................................... 12 
APPENDIX A –RISK ASSESSMENT ............................................................................................... 13 
 

MAKINEX MS-100 Operator’s Manual Rev0819 Page 1 of 14

INTRODUCTION

Thank you for purchasing a MAKINEX product.

This manual provides information and procedures to safely operate and maintain the MS-100

Mixing Station. For your own safety and protection from injury, carefully read, understand, and

observe the safety instructions described in this manual.

Keep this manual or a copy of it with the machine. If you lose this manual or need an additional

copy, please contact MAKINEX. This machine is designed and built with user safety in mind;

however, it can present hazards if improperly operated and serviced. If there are any questions

regarding operating or servicing of this machine, please contact MAKINEX.

All rights, especially copying and distribution rights are reserved.

No part of this publication may be reproduced in any form or by any means, electronic or

mechanical, including photocopying, without express written permission from MAKINEX.

Any type of reproduction or distribution not authorised by MAKINEX represents an infringement

of valid copyrights and will be prosecuted. We expressly reserve the right to make technical

modifications, even without due notice, which aim at improving our machines or their safety

standards.

DISCLAIMER

MAKINEX and its affiliates take no responsibility for any damage, injury or death resulting from

the incorrect or unsafe use of this product. Use of this product should be undertaken by

competent persons only. It is the operator’s responsibility to ensure that the following safety

procedures are followed. If you are unsure, do not operate this product.

Record the model and serial numbers as well as date and place of purchase for future reference.

Have this information available when ordering parts and when making technical or warranty

inquiries.

MAKINEX SUPPORT

Refer to contact details on pg. 12

MODEL NO.

MS-100

SERIAL NO.

DATE OF PURCHASE

PURCHASE LOCATION

MAKINEX MS-100 Operator’s Manual Rev0919 Page 2 of 15

ABOUT THIS MANUAL

This manual uses the following symbols to help differentiate between different kinds of

information. The safety symbol is used with a key word to alert you to potential hazards in

operating and owning power equipment. Follow all safety messages to avoid or reduce the risk

of serious injury or death.

KEY TERMS

READ

CAREFULLY

READ CAREFULLY –refers to important information that should be paid

careful attention.

CAUTION

CAUTION - indicates a situation that may cause injury or damage to the

machine if the user does not follow the instructions.

WARNING

WARNING –indicates a situation that may cause injury or death if the user

does not follow the instructions correctly.

DANGER

DANGER –indicates a situation that will cause injury or death if the user

does not follow the instructions as written.

PROHIBITED

PROHIBITED –identifies actions that should never be carried out by

anyone interacting with the equipment.

These safety warnings do not eliminate all possible hazards that could occur therefore it is

essential to use common sense and to strictly follow any instructions to prevent accidents.

SAFETY INFORMATION

Throughout this document there are several safety warnings. The user should read through this

complete document before using the MS-100.

READ

CAREFULLY

Ensure you read all information contained in this manual before using the

MS-100.

READ

CAREFULLY

Ensure you read the User Manual and safety instructions for the MS-100

and other components that are part of this unit.

See Appendix for more information.

DANGER

Always wear the recommended personal protective equipment (PPE).

MAKINEX MS-100 Operator’s Manual Rev0919 Page 3 of 15

PROHIBITED

Do not expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock.

SAFETY DECALS

There is a safety and information panel provided on the Clamp Arm (see images below) of the

MS-100 to alert the user of potential safety risks/hazards. Please read and adhere to all

instructions on the Unit.

PROHIBITED

It is forbidden to remove any safety or instructional stickers or panels from

the MS-100.

READ

CAREFULLY

Read all safety and instructional stickers displayed on each component of

the MS-100.

MAKINEX MS-100 Operator’s Manual Rev0919 Page 4 of 15

PRODUCT DESCRIPTION AND SPECIFICATION

MS-100is the ultimate mixing station for all self-levelling cement and compounds, producing a

perfect mix every time. Designed by contractors for contractors it provides efficient hands-free

mixing and fast precision pouring of materials saving time and effort on jobs.

A MS-100 mixing station can mix up to 80kg (176lbs) in 3 minutes, which can equate to 1 Tonne

per hour. MS-100 is ultra-lightweight for easy transportation and the ergonomic design with

easy-tilt operation provides control and speed for precision pouring.

The MS-100 will suit various Stirrers/Mixers (please contact your retailer for more information). A

Festool® Stirrer, Collomix® Hand Mixer and Makinex Electric Mixer are optional and are also

sold separately; both models feature variable speeds and are fully detachable from the MS-100.

MS-100 Features:

•Hands-free mixing

•Built-in timer

•4-wheel mobility

•Light and durable aluminium trolley - 18kg

•Large pivoting bucket

•Dust and splash reduction cover

•Top section is detachable to minimise size during transport

•Locking castor wheel

•Trolley can be used to transport product and tools on work sites

•Vacuum port supplied to allow attachment of a vacuum to eliminate dust

DIMENSIONS:

HEIGHT HANDLE ATTACHED (Operating)

1070mm -1300mm (42-51 inches)

HEIGHT HANDLE DETACHED (Transport)

780mm (31 inches)

OVERALL WIDTH

540mm (21 inches)

OVERALL LENGTH

626mm (25 inches)

LENGTH OF HANDLE ADJUSTMENT

250mm (10 inches)

WEIGHT:

WEIGHT (WITHOUT STIRRER/MIXER)

18kg (40lbs)

WEIGHT (WITH FESTOOL® STIRRER)

25kg (55lbs)

WEIGHT (WITH COLLOMIX® HAND MIXER)

24kg (53lbs)

WEIGHT (WITH MAKINEX ELECTRIC MIXER)

26kg (57lbs)

MAKINEX MS-100 Operator’s Manual Rev0919 Page 5 of 15

INSTRUCTIONS FOR USE

WARNING

NEVER operate the MS-100 without wearing the appropriate personal

protective equipment (PPE) including appropriate footwear.

Assess the surrounding area for hazards.

WARNING

ALWAYS seek appropriate First Aid if Injury, Poisoning or Irritation

occurs due to contact with Materials and Substances.

CAUTION

ALWAYS ensure that the work place is well ventilated.

STEP 1 –FITTING A STIRRER/ MIXER TO THE MS-100

WARNING

Ensure the Stirrer/Mixer is disconnected from mains power before

Attaching or Removing it to/from the MS-100 frame.

CAUTION

NEVER place hand under ‘Slider Clamp’or ‘Clamp Arm’ when

adjusting the height.

1. Refer to the Appendix for exploded assembly diagram.

2. Check that the ‘Castor Brake’has been engaged.

MAKINEX MS-100 Operator’s Manual Rev0919 Page 6 of 15

3. Attach MS-100 ‘Clamp Arm’ into the ‘Slide Arm Collar’ of the MS-100 Frame; tighten ‘Collar

Latch’in place.

4. When fitting a mixer, make sure the ‘Slider Clamp’opened, fit it through the gap from the

front end and then position the collar part of the mixer between the ‘SL clamp and tighten.

NOTE: Always grab the mixer by the handles and make sure the mixer is securely

tightened, but do not over-tighten!

Adjustable Slider Clamp

Clamping

lever

Slide Arm

Collar

Clamp Arm

Collar

Latch

MAKINEX MS-100 Operator’s Manual Rev0919 Page 7 of 15

If fitting the Festool® Stirrer, ensure the Variable

Speed Dial is facing away from the MS-100

Handle.

If fitting the Collomix® Mixer and Makinex

Electric Mixer, ensure the Electrical Cord is

facing to back of the MS-100.

STEP 2 –USING THE MS-100

WARNING

NEVER place hands into the Bucket whilst Stirrer/Mixer is Mixing.

ALWAYS disconnect Stirrer/Mixer from mains power before placing

hands into the Bucket.

WARNING

ALWAYS ensure the Stirrer/Mixer is switched OFF before plugging it in.

ALWAYS wind-up the Power Cord before moving the MS-100.

ALWAYS be aware of the Power/Extension Cord position when working

around the MS-100™.

CAUTION

Maximum SAFE Load: 60-80kg (132-176lbs) of wet levelling compound.

DO NOT EXCEED 80kg (176lbs)

ALWAYS use correct lifting technique when loading materials.

1. Ensure Stirrer/Mixer is firmly secure in the ‘Slider

Clamp’.

2. Attach Lid to Bucket.

3. Make sure the ‘Locking Pin’is engaged (i.e. locked

to prevent the bucket from pivoting) at the base of

the Bucket and that the Castor Wheel Brake has

been applied.

4. Attach a vacuum hose through the ‘Vacuum Port’.

Locking Pin

Vacuum Port

MAKINEX MS-100 Operator’s Manual Rev0919 Page 8 of 15

5. Pour in correct amount of water for desired mix quality (refer to Levelling Compound

manufacturer’s recommendations).

6. Festool® Stirrer: Make sure Stirrer is

switched to High Gear ‘2’ and Variable

Speed Dial is set to ‘1’.

Collomix® Mixer and Makinex Electric

Mixer: Make sure Mixer is switched to low

speed.

7. Plug in Stirrer/Mixer to Mains Power.

8. Press Trigger to turn ‘ON’ Stirrer/Mixer and lock in Trigger.

9. Start adding Bags of Levelling Compound one at a time whilst using the section lid to

encapsulate the dust in the bucket.

10. Festool® Stirrer: After 2/3 of Levelling

Compound has been added to the mix

start to increase the Variable Speed Dial.

Collomix® Mixer and Makinex Electric

Mixer: Leave speed on low setting.

11. Festool® Stirrer: After final Bag of

Levelling Compound has been added

turn Speed Dial to Maximum Power.

Collomix® Mixer and Makinex Electric

Mixer: After final bag of Levelling Compound

has been added switch drill to high speed.

12. During mixing, wait for 30 seconds as the compound is being mixed; turn ‘OFF’

Stirrer/Mixer temporarily and scrape off any excess powder that has gathered around the

top of the bucket.

(For the Festool® Stirrer: Turn speed dial to ‘1’ before switching ‘OFF’ at the Trigger, then

disconnect from mains power.)

13. Switch Stirrer/Mixer back ‘ON’ and return to Maximum Power until Levelling Compound is

mixed to a lump-free consistency.

14. Festool® Stirrer: Once equal

consistency has been achieved turn

down Variable Speed Dial to ‘1’ and

switch ‘OFF’ Stirrer at the Trigger.

Collomix® Mixer and Makinex Electric

Mixer: Once equal consistency has been

achieved turn off the Mixer.

15. Unplug Stirrer/Mixer from Power Supply; wind-up the Power Cord on the MS-100 Handle.

NOTE: After the final bag of Levelling Compound has been added, the whole mixing

operation should take approximately 2 minutes.

Trigger &

Trigger Lock

High / Low

Gear Selector

Trigger & Trigger Lock

High / Low

Gear Selector

Otros manuales para MS-100

Tabla de contenidos

Otros manuales de Mezclador de música de MAKINEX

MAKINEX

MAKINEX MS-100 Manual de usuario

MAKINEX

MAKINEX MS-150 Manual de usuario

Manuales populares de Mezclador de música de otras marcas

Neve

Neve 8816 Manual de usuario

Mackie

Mackie Onyx Analogue Mixer Manual de usuario

Behringer

Behringer EUROPOWER PMP518M Manual de usuario

Peavey

Peavey S-32 Sanctuary Series Manual de usuario

Rane

Rane MP 4 Manual de usuario

True

True T9 Touchscreen Console Manual de usuario

Studiomaster

Studiomaster Air Pro 24 Manual de usuario

Pioneer

Pioneer SVM 1000 - Audio/Video Mixer Manual de usuario

Roland

Roland M-160 Manual de usuario

Yamaha

Yamaha MR1642 Manual de usuario

Ecler

Ecler MAC40v Manual de usuario

Pioneer

Pioneer DJM 909 - Battle Mixer W/Effects Manual de usuario

Veeder-Root

Veeder-Root TLS-350 Series Manual de usuario

Alto

Alto APM80.QUAD Manual de usuario

Omnitronic

Omnitronic PM-211 Manual de usuario

SoundCraft

SoundCraft B400 Manual de usuario

Roland

Roland SoundCanvas SC-8820 Manual de usuario

CARVIN

CARVIN RX 1200 Manual de usuario