Magic MWS 8840 Manual de usuario
M
ULTI
P
OINT
™
Workstation MWS 8840
USER MANUAL
M
ULTI
P
OINT
™
Workstation MWS 8840
1
TABLE OF CONTENTS
INTRODUCTION.................................................................................. 2
FEATURES ..................................................................................... 2
APPLICATION................................................................................ 3
PACKAGE CONTENTS .................................................................... 3
MINIMUM SYSTEM REQUIREMENTS ........................................... 4
FOR OPTIMUM VIDEO DISPLAY ................................................... 5
REGULATORY COMPLIANCE ......................................................... 5
SUPPORTED DISPLAY RESOLUTIONS............................................ 5
DEVICE INSTALLATION - SOFTWARE .................................................. 6
INSTALLING MWS8840 HARDWARE................................................... 8
VERIFYING THE MWS8840 CONNECTION .......................................... 9
SPLIT SCREEN ON Windows Multipoint Server 2011 ...................... 10
ADJUSTING THE SCREEN RESOLUTION ............................................ 13
DEVICE DRIVER UN-INSTALLATION .................................................. 15
VESA MOUNTING ............................................................................. 18
TROUBLESHOOTING TIPS................................................................. 19
M
ULTI
P
OINT
™
Workstation MWS 8840
2
INTRODUCTION
Thank you for purchasing the MultiPoint Workstation 8840. The MultiPoint
Workstation (MWS8840) is designed specifically for Windows MultiPoint Server 2011.
Simply connect it to an available USB port on the server and attach a monitor,
keyboard, and mouse to add a new workstation. The MW S 8840 features four
high-speed USB 2.0 ports, audio and microphone ports and a VGA port that supports
resolutions up to 1600 x 1200. Add up to ten MW S8840 per server. The MW S8840
provides an inexpensive and reliable way to expand your Windows MultiPoint Server
2011 for school and office running “office application”; “Home Entertainment” and
“Full Screen Movie Playback” are not recommended.
© 2011 Microsoft. All rights reserved.
Microsoft, Active Directory, MultiPoint Server, Office, .NET Framework, Windows,
and Windows Server are trademarks of the Microsoft group of companies. All other
trademarks are property of their respective owners.
FEATURES
zResolutions up to 1680 x 1050 (recommend), 1600 x 1200
z4 USB 2.0 Ports
zStereo Audio Output (Speaker/Headphone) and Mono audio input (Mic)
zUSB 2.0 compliant
zPlug-and-Play compliant
M
ULTI
P
OINT
™
Workstation MWS 8840
3
APPLICATION
PACKAGE CONTENTS
zMW S 8840
zVESA Mounting kits
zUSB cable (2 Meters)
z3A/5V AC Power Adapter
zDriver CD
zUser Manual
M
ULTI
P
OINT
™
Workstation MWS 8840
4
MINIMUM SYSTEM REQUIREMENTS
zAvailable USB 2.0 Port
zCPU –One of the following:
•x64-based Intel Pentium, Intel quad core (i7, i5, i3), XEON, Intel dual core.
•Compatible processor (MultiPoint Server supports up to four core & eight core
CPUs on one server)
Note:
1)AMD Opteron / Athlon, AMD Embed chipset is not recommend due to
unstable keyboard/mouse operation which may not recognize under USB1.1
device.
2)Intel Itanium Processor is not supported.
zRAM –The required RAM depends on the number of Workstation is needed:
•2 GB for 4 stations
•4 GB for 6 stations
•8 GB for 10 stations
zMulti-core processor support
•Support up to 4 & 8 multi-core processors; dual-core is less powered and
therefore only 2 to 3 workstation can be supported.
zMinimum disk space for setup
•32 GB
OPERATING SYSTEMS SUPPORTED
For optimal multimedia performance, we recommend the following CPUs:
zDual-core processor: support up to 3 stations under low processing application.
zQuad-core processor: support up to 6 stations under low processing application.
zCore-i5 processor: support up to 6 stations under low processing application.
zCore-i7 processor: support up to 8 or 10 stations under low processing
application.
zWindows MultiPoint Server 2011
M
ULTI
P
OINT
™
Workstation MWS 8840
5
FOR OPTIMUM VIDEO DISPLAY
Technically, short video playbacks can be supported but the operating system
needs to be
- i7 processor
- Intel Sandy bridge chipset
Note: Extended video display at full screen is not recommended; it often exhausts
CPU and force system with much lower performance.
REGULATORY COMPLIANCE
FCC / CE / C-tick / VCCI
Tested to comply with FCC Standards.
SUPPORTED DISPLAY RESOLUTIONS
M
ULTI
P
OINT
™
Workstation MWS 8840
6
DEVICE INSTALLATION -SOFTWARE
Installing the device driver enables Windows MutliPoint Server 2011 to
recognize the MWS8840. Please make sure the MWS8840 is unplugged from
your server before executing the setup program.
Step 1
Insert the Driver installation CD into the CD-ROM drive. The installer should start
automatically. If it does not, double click Setup.exe to start the Installation Wizard.
Step 2
Driver Installation Wizard, click Next to continue
M
ULTI
P
OINT
™
Workstation MWS 8840
7
Step 3
License Agreement; review it and check I accept the terms of the license
agreement Click Next to accept the License Agreement.
Step 4
Setup is searching for installed features... *You may notice the screen flashes during
hardware installation. It is part of the normal process. .
M
ULTI
P
OINT
™
Workstation MWS 8840
8
Step 5
Driver Installation Wizard, click Finish to continue and restart the computer.
INSTALLING MWS8840 HARDWARE
Step 1
Connecting monitor to the VGA connector of the MW S8840, turn on the monitor.
Connecting power adapter, USB cable, keyboard, and mouse to the MW S8840.
Step 2
Connect one end of the USB cable to the MW S 8840 and the other end to an
available USB 2.0 port of your computer. The driver installation will proceed
automatically.
Step 3
Repeat steps 1 & 2 for the remaining MWS8840 on to other workstation.
M
ULTI
P
OINT
™
Workstation MWS 8840
9
VERIFYING THE MWS8840 CONNECTION
Step 1
Right click ‘Manage’from the ‘computer’ as the screen
Step 2
Point to ‘Device Manager’ on the left panel under ‘Server Manager’ go to ‘View’and
click ‘Devices by type’ as the picture showed.
Tabla de contenidos
