Magic Flight Orbiter Manual de usuario
ORBITER OVERVIEW
VAPOR IN
VAPOR OUT
FILL
LEVEL
BRACE
SLIDE
BASE
Two Water Pipe Whips are included with your
Orbiter. Connect the 18” Whip to your vaporizer
and use the 27” Whip to draw your vapor.
18” WHIP
MUAD-DIB
LAUNCH
BOX
27” WHIP
CONNECTING THE WHIPS
When using the Launch Box with
the Orbiter, it may be difficult to
accurately sense the temperature
of the vapor.
For this reason, we recommend use
only for Advanced Users already
familiar with the way that the
Launch Box heating works in order
to avoid combusting your trench.
LAUNCH BOX SAFETY
PRE-FLIGHT CHECKLIST
REMOVING THE GLASS
ALWAYS REMOVE GLASS FROM BASE WHEN
ADDING/REMOVING WATER TO AVOID DAMAGING WOOD
Pull back the SLIDE on the
BRACE to release tension.
Remove the GLASS from
the BRACE and BASE.
Remove GLASS from BRACE and BASE.
With GLASS in the BRACE, return the SLIDE
to the top of the BRACE to lock in place.
Return GLASS to the BASE and BRACE.
Add water to the FILL LEVEL.
FILLING IT UP
ALWAYS REMOVE GLASS FROM BASE WHEN
ADDING/REMOVING WATER TO AVOID DAMAGING WOOD
CLEANING GLASS
ALWAYS REMOVE GLASS FROM BASE WHEN
ADDING/REMOVING WATER TO AVOID DAMAGING WOOD
Remove GLASS from BRACE and BASE and
drain the liquid.
Rinse with water to remove all ISO and salt, then
return GLASS to the BASE and BRACE.
Cover both openings with your fingers and shake
vigourously until all residue is removed.
Add a generous amount of salt to act as an abrasive.
Add small amount (20-30ml) of Isopropyl Alcohol.
Remove the stem from the end of the whip.
Hold securely from glass end and squeeze residue
out of the open end like toothpaste.
Soak in hot water for about 5 minutes to loosen
buildup inside of the whip.
Slide the wood portion off of the whip.
Apply continuous pressure as you work your fingers
along the length of the whip.
FOR FURTHER INFORMATION, CHECK OUT OUR VIDEO TUTORIAL AT: MFLB.IT/HOW2ORBIT
Dry whip thoroughly, then slide wood portion back
onto the whip and reinsert stem.
CLEANING WHIPS
Your Orbiter carries a limited lifetime functional warranty.
The wood base and metal stand are covered for life. If the glass
breaks, please contact us at MFLB.IT/CONTACT for information
regarding our glass replacement program.
The warranty does not cover Orbiters that are: lost, stolen, confiscated,
wilfully destroyed, intentionally damaged, or with no serial number.
For warranty service, fill out our online form at MFLB.IT/CONTACT. You
will be asked to provide: your name, address, phone number, the serial
number of your Orbiter, a photo of the issue, and description of the issue.
For more comprehensive warranty information, please visit:
MFLB.IT/WARRANTY
WARRANTY
ORBITER TUTORIAL
FOR FURTHER INFORMATION, CHECK OUT OUR
VIDEO TUTORIAL AT: MFLB.IT/HOW2ORBIT
HANDMADE WITH LOVE IN CALIFORNIA
Tabla de contenidos
Otros manuales de Vaporizador de Magic Flight
Manuales populares de Vaporizador de otras marcas
Storz & Bickel GMBH
Storz & Bickel GMBH Crafty Manual de usuario
Joyfect
Joyfect Freaky One Manual de usuario
SIGELEI
SIGELEI 213 FOG Manual de usuario
Eleaf
Eleaf Lemo 2 Manual de usuario
Vapor Brothers
Vapor Brothers VB Eleven Pen Manual de usuario
STORZ & BICKEL
STORZ & BICKEL VOLCANO CLASSIC Manual de usuario