MAD Gaze W100 Manual de usuario
MAD Gaze Watch
Gesture Controlled Smart Watch
USE GUIDELINES
WATCH USE GUIDELINES (v2020.10) ` Page 1
Table of Contents
Package Overview 3
Hardware Specification 4
Product Registration 6
Product Description 7
Product Guidelines 7
Dial Setting 9
Menu 10
MAD Fitness Application 12
Hand Gesture Control 13
Mobile Connection and Training 14
Navigate The Connected Device On Watch 19
Reconnect And Disconnect 23
Retrain Certain Gesture 24
Retrain All Hand Gestures 26
Shortcut Mode Setting 27
Gesture Media Control On Watch 29
Walkie-Talkie Application - Zello 31
Tutorial Video Source 34
Troubleshooting 35
Warranty 38
Limited Warranty 39
Cautions 39
WATCH USE GUIDELINES (v2020.10) ` Page 2
Package Overview
The package includes the following items:
1. MAD Gaze Watch smart watch x1
2. Charging cable x1
3. Data Transmission Cable x1
4. Watch Band (Regular) x1
* Please use only MAD Gaze authorized accessories.
* The use of unauthorized accessories may cause performance problems and
failures, which are not covered by the warranty.
* Avoid using fast chargers, only charge the watch with 5V1A output chargers.
* Do not place the charging cable and data transmission cable on metal to
prevent short circuits or fire.
WATCH USE GUIDELINES (v2020.10) ` Page 3
Hardware Specification
Product Model: W100
CPU: Quad Core 1.25GHz
Operating System: Android 7.1
RAM: 1GB
Storage: 16GB
Screen: 1.39 inch Capacitive Touch Screen
260,000 Colors 400x400 pixels Resolution
Sensors: Accelerometer and Gyroscope,
Heart Rate Monitor
Battery: Capacity: 620mAh
Autonomy: 90 hours Standby Time;
48 hours Working time
Wireless Connection: Bluetooth 4.0
Wi-Fi 2.4G
IP Rating: IP67 Water Resistant and Dust Proof
SIM Card: 4G Nano SIM
Audio: Microphone, speaker
Vibrating: Support
WATCH USE GUIDELINES (v2020.10) ` Page 4
Product Appearance
WATCH USE GUIDELINES (v2020.10) ` Page 5
Product Registration
Please register your device to activate warranty within 7 days upon purchase
date, otherwise, your device might not be covered under MAD Gaze Warranty.
One device can only be registered under one MAD ID account.
For details of Warranty Terms, please read Warranty on page 31.
You will be required to enter the serial number of Watch when registering for
the product warranty service. Follow the steps below to find the watch serial
number:
1. Enter Settings on Watch
2. Select About watch > Status > Serial number
3. You will find the Watch serial number W1X01234567
(The number of digits 01234567 is an unique identification for each
product unit will vary.)
WATCH USE GUIDELINES (v2020.10) ` Page 6
Product Registration
www.madgaze.com/warranty/watch
Product Description
Product Guidelines
1. Press and hold the upper button for 3 seconds to activate the watch.
During the first time of the setup process, the Watch system might take
a longer time to configure parameters. Please wait patiently.
1.1. Select your language;
1.2. Enter your body measurements of weight, height, daily exercise
goals and gender;
1.3. Scan the QR code with your mobile phone to download the
application “MAD Fitness” for synchronize your mobile and Watch;
1.4. Turn on the Bluetooth on your mobile and Watch, connect your
mobile with Watch by scanning the pairing QR code in MAD
Fitness app. MAD Fitness app will synchronise your mobile
content on the Watch. Or you can also visit our official website to
download the application:
https://www.madgaze.com/support
2. Press and hold the power button of Watch to access the following.
2.1. Power off: Shut down the system
2.2. Reboot: Restart the system
2.3. Power Save Mode: Power saving state reduces the power
consumption of Watch. The battery icon will turn from green to
grey colour while the displaying screen will only show the current
time and battery life. Watch will temporarily enter sleep mode
and pause all applications running in the background. Users
cannot switch to other interfaces until turning off the low power
mode.
2.4. Recent Task: Access to shortcut keys of recently browsed
applications. Swipe right to manage browsing data and clear the
cache.
2.5. Watch Display Interface Button: Press the top center button on
screen to switch the Watch display screen between square and
circle interface.
Circle interface: Full Screen mode; Square interface: zoom out
mode
WATCH USE GUIDELINES (v2020.10) ` Page 7
3. Product Guidelines
To maneuver on Watch, swipe from the edge of the display screen and slide
over half of the screen. Sliding only the middle of the display screen may not
trigger certain tasks.
3.1. Swipe right to enter the main menu;
3.2. Swipe right twice to enter sports mode;
3.3. Swipe right to access the synchronised content from phone and
display it on Watch notification;
3.4. Swipe down to view the Watch shortcut menu; Swipe left to view
different shortcuts in the menu.
3.4.1. Connection shortcuts: cellular signals, Bluetooth
connection status etc.
3.4.2. Launching different modes on Watch: Do not disturb mode,
brightness adjustment, raise to wake, flight mode, network
data, GPS, Bluetooth & Wi-Fi shortcuts
3.4.3. Clear cache shortcut
3.4.4. Media control shortcuts: volume adjustment, music control
3.4.5. Weather interface: weekly weather forecast
WATCH USE GUIDELINES (v2020.10) ` Page 8
4. Swipe up to access fitness data; then swipe left to view the step count,
daily mileage and calories burnt.
5. Swipe right to quit the shortcut menu.
Dial Setting
Press and hold the dial screen to enter the dial setting. Users can manage the
appearance and setting of the dial according to their preferences.
Download new Watch face from the server (this requires network data):
Press and hold the dial screen to enter the dial setting. Swipe left till the end to
see a blue “+” sign. Swipe up or down to choose your personalised watch face,
click the install button to download the new watch face. Press the power
button to return to the dial interface.
Delete the new watch face downloaded from the server:
Press and hold the dial screen to enter the dial setting. Swipe to the new watch
face downloaded from the server. Click the blue “-” sign in the upper left
corner to delete. Please note that only watch interfaces downloaded from the
server can be deleted.
WATCH USE GUIDELINES (v2020.10) ` Page 9
Menu
Contacts:
1. Create contacts to save names, phone numbers and more
2. Manage and edit contacts information
3. Sync your mobile contacts to the watch
(only applicable on Android phones.)
Phone: Dial phone calls (only applicable when a SIM card is inserted.)
Messages: Send messages to your contacts (only applicable when a SIM card is
inserted.)
Settings：
1. Sound: Adjust the volume;
2. Display: Adjust the display brightness;
3. App List Style: Change the display interface;
4. Connect: Access Bluetooth, Wi-Fi, Wi-Fi Hotspot, USB, Airplane mode,
GPS, Cellular Network;
5. Gesture: Raise to wake (Default as off), Pedometer service (Default as
on);
6. Power saving: Switch on the power saving mode will disable all functions
on the watch but only display time and battery;
7. Language & input settings;
8. Date & time settings;
9. Reset equipment: Reset the watch to clear all the data and restore the
initial state;
10.Uninstall application: Uninstall the apps on Watch;
11.More: Check the storage usage;
12.About watch: View your model, serial number, software version and
more
Browser: Browse website information;
WATCH USE GUIDELINES (v2020.10) ` Page 10
Tabla de contenidos
