
SETTINGS
Pairing - Howto pair indoor and outdoor
unit
NOTE: All units must be switched on and
powered.
1. Press and hold the volume button - (9)
on the indoor unit until the talk button
ashes blue. 2.
2. Press the bell button (13) on the
outdoor unit.Then press the pairing
button (16) with e.g. a bent paper clip.
3. If the pairing is successful, the pairing
mode is automatically exited andthe
LED indicators go out.
Adding an additional indoor/outdoor unit
Atotal of two indoorand two outdoor units
can be paired together. If another unit is to
be added, repeat steps 1-3 withthe second
indoor/outdoor unit.
Notes:
• If a third indoor or outdoor unit is paired,
the unit that was paired rst is removed
from the system.
• If an indoor unit is to be removed from
the system, please press and hold the
reset button ofthe unit for approx. 3
seconds until the displayashes red and
blue. The unit isthen no longer connected
to any outdoor unit.
Setting the ringing melody
Atotal of 16 melodies are available.
Press the bell button (13), the indoor unit
plays the currentlyset melody. Now press
the button volume + (8) to playthe next
melody. Each time the volume button + is
pressed, the next melody is played.To save
the selected melody, press the talkbutton
(4).
It is also possible to select dierent ringing
melodies for two outdoor units.
Adjusting the ring volume
Press the button volume - (9) to adjust the
ring volume. Each press increases the
volume. There are 5 volume levels available.
Aerthe loudest level, the volume auto-
matically jumps to the quietest level. The
last selected volume is automatically saved.
Speech connection
When a visitorpresses the call button on
the outdoor unit, the indoor unit plays the
selected ringing melody and the talk button
lights up permanently in blue. Press the talk
buttons on the indoor unit to answer and
talk to the person on the outdoor unit (the
LED indicator ashes blue during thetalk
connection). The call is made in duplex
mode (as on the telephone). Press the talk
button again to end the call. The LED
display goes out.
Call volume indoor unit
During a call, press the button volume + (8)
to increase the volume orthe button
volume - (9) to decrease the volume.
ADF-701 EX | ENGLISH ENGLISH | ADF-701 EX
18 19
GB GB