Luxibel LX152 Manual de usuario

LX152

LUXIBEL PIXBAR - KLING-NET & ART-NET

USER MANUAL

LX152

V. 04 – 04/03/2014 2 ©Velleman nv

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of

the device after its lifecycle could harm the environment. Do not

dispose of the unit (or batteries) as unsorted municipal waste; it

should be taken to a specialized company for recycling. This device

should be returned to your distributor or to a local recycling

service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Luxibel®! Please read the manual thoroughly before

bringing this device into service. If the device was damaged in transit, don't

install or use it and contact your dealer.

2. Safety Instructions

Be very careful during the installation: touching live wires

can cause life-threatening electroshocks.

Always disconnect mains power when device not in use or

when servicing or maintenance activities are performed.

Handle the power cord by the plug only.

Indoor use only. Keep this device away from rain,

moisture, splashing and dripping liquids. Never put objects

filled with liquids on top of or close to the device.

Keep this device away from children and unauthorized

users.

Caution: device heats up during use.

Do not stare directly at the light source, as this may

cause

•epileptic seizure in sensitive people

•temporarily loss of sight (flash blindness)

•

permanent (irreversible) eye damage.

There are no user-serviceable parts inside the device. Refer

to an authorized dealer for service and/or spare parts.

•Only connect this product to a grounded and protected circuit.

•Do not connect this product to a dimmer or rheostat.

LX152

V. 04 – 04/03/2014 3 ©Velleman nv

•Make sure that the available voltage does not exceed the voltagestated

in the specifications of this manual.

•Do not crimp the power cord and protect it against damage. Have an

authorised dealer replace it if necessary.

•Use an appropriate safety cable to fix the device (e.g. VDLSC7N or

VDLSC8N).

•Install the device at a minimal distance of 0.5 m from flammable and

explosive objects or substances.

•The maximum ambient temperature is 40 °C. Do not operate the device

at higher temperatures.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages

of this manual.

Keep this device away from dust and extreme temperatures.

Make sure the ventilation openings are clear at all times. For

sufficient air circulation, leave at least 1" (± 2.5

cm) in front

of the openings.

Protect this device from shocks and abuse. Avoid brute force

when operating the device.

•Familiarise yourself with the functions of the device before actually

using it. Do not allow operation by unqualified people. Any damage that

may occur will most probably be due to unprofessional use of the

device.

•All modifications of the device are forbidden for safety reasons. Damage

caused by user modifications to the device is not covered by the

warranty.

•Only use the device for its intended purpose. All other uses may lead to

short circuits, burns, electroshocks, lamp explosion, crash, etc. Using

the device in an unauthorised way will void the warranty.

•Damage caused by disregard of certain guidelines in this manual is not

covered by the warranty and the dealer will not accept responsibility for

any ensuing defects or problems.

•Mechanical wear and LEDs are not covered by warranty.

•A qualified technician should install and service this device.

•Do not switch the device on immediately after it has been exposed to

changes in temperature. Protect the device against damage by leaving

it switched off until it has reached room temperature.

•This device is designed for professional use on stage, in discos,

theatres, etc. The device should only be used indoors with the current

as stated in the technical specifications.

LX152

V. 04 – 04/03/2014 4 ©Velleman nv

•This device is designed for professional use on stage, in discos,

theatres, etc. The device should only be used indoors.

•Use the original packaging if the device is to be transported.

•Keep this manual for future reference.

4. Features

•Kling-Net / Art-Net supported 1 meter bar with 160 pixels

•works with any Kling-Net / Art-Net control program for pixel mapping

•ideally works with MADRIX control program

•video replay when with MADRIX or any Kling-Net program with this

function

•480 DMX channels

•RDM ready

•8 x 2 digit LCD display for menu settings

•Cat 5 cable for data connection

•equipped with Neutrik powerCON in/out

5. Overview

6. Protocols

Kling-Net

•ArKaos has designed the Kling-Net protocol to allow the distribution of

real-time video data to remote display devices, such as LEDs or LED

panels, over Ethernet.

•Kling-Net allows auto configuration of display devices using an

etherCON® RJ 45 Ethernet connection.

•The LX150 works best with the Arkaos Mediamaster™ Pro software and

its Video Mapper extension (Mac and Windows).

LX152

V. 04 – 04/03/2014 5 ©Velleman nv

•Refer to the ArKaos MediaMaster software manual for detailed

instructions on programming this product (www.arkaospro.com).

Art-Net

•Art-Net is a communication system that allows DMX512 to be sent over

Ethernet.

•The Art-Net protocol was developed by the company Artistic Licence

Engineering and has now been published into the public domain.

•The protocol description is available on the following link:

www.artisticlicence.com/WebSiteMaster/User%20Guides/art-net.pdf

•Various commercial and open source programs support the Art-Net

protocol.

7. Mounting

•The LX152 comes with two adjustable mounting brackets with three 10

mm holes to which you can attach clamps. This bracket may also serve

as a floor or wall mount support. You must supply your own clamps and

make sure the clamps are capable of supporting the weight of this

product.

•When selecting an installation location, consider easy access to this

product for operation, programming adjustments, and routine

maintenance.

•The carrying construction must be able to support 10 times the weight

of the device for 1 hour without deforming.

Required controllers

•Kling-Net or Art-Net compatible software is required to be able to use

this device.

8. Connections

Input power

Make sure that you are connecting this product to the proper voltage (see

Technical Specifications).

Data linking

The LX152 works connected through a network switch (or crossover cable)

to a computer (Windows®, Apple Macintosh® or Linux®) with Kling

-Net / Art-Net compatible software installed.

Data Connection

The LX152 uses an RJ45 data connection to link all data ports.

LX152

V. 04 – 04/03/2014 6 ©Velleman nv

9. Menu options

To select an option in the menu:

1. Press Menu to activate the menu.

2. Press Up or Down to select a menu option and press Enter to confirm.

3. Set theoption with Up or Down and press Enter to confirm.

To exit the menu without saving, press Menu instead of Enter.

4. Press Menu to exit the menu.

Main Level

Options

Description

Input Mode

Kling-net or Art-Net

IP Mode

Manual

Manually set the IP address

Static

Static IP address

DHCP Receives the IP address from the

DHCP

DMX Mode

3 ch – 30 ch – 120 ch

– 480 ch

Sets the channel mode

Net

000-127

Sets the net address

Subnet

0-15

Sets the subnet address

Universe

0-15

Sets the universe address

Start Channel

1-33

Sets the start channel address

IP Address

Shows the current IP address

Device ID

Shows the device ID number

Output Test Red Illuminates all red LEDs

Green

Illuminates all green LEDs

Blue

Illuminates all blue LEDs

White

Illuminates all white LEDs

Colour Scroll

Scrolls through different colours

Colour Change

Blends through all different colours

10.Cleaning and Maintenance

Before starting any cleaning or maintenance activities:

1. Unplug the device's power cord from the outlet.

2. Let the device cool down.

LX152

V. 04 – 04/03/2014 7 ©Velleman nv

Cleaning

•Clean the external optics with a soft cloth.

•Always be sure to dry all parts completely before plugging the unit back

in.

•Cleaning frequency depends on the environment in which the unit

operates (i.e. smoke, fog residue, dust, dew).

•Do not immerse the device in any liquid.

Maintenance

•All screws should be tightened and free of corrosion.

•The housing, the lenses, the mounting supports and the installation

location (e.g. ceiling, suspension, trussing) should not be deformed,

modified or tampered with; e.g. do not drill extra holes in mounting

supports, do not change the location of the connections…

•Mechanically moving parts must not show any signs of wear and tear.

•The electric power supply cables must not show any damage. Have a

qualified technician maintain the device.

•There are no user-serviceable parts, apart from the fuse.

•Refer to an authorized dealer for service and/or spare parts.

11.Technical Specifications

power supply

230 Vac 50 Hz

power consumption

56 W

light source 5050 smd LEDs 50 000 h

refresh rate

400 Hz

pitch

25 mm

dimensions

1000 x 108 x 140 mm

weight

4.5 kg

Use this device with original accessories only. Velleman nv cannot

be held responsible in the event of damage or injury resulting from

(incorrect) use of this device.

For more info concerning this product and the latest version of this

manual, please visit our website www.luxibel.com.

The information in this manual is subject to change without prior

notice.

The copyright to this manual is owned by Velleman nv. All

worldwide rights reserved. No part of this manual may be copied,

reproduced, translated or reduced to any electronic medium or otherwise

without the prior written consent of the copyright holder.

Velleman® Service and Quality Warranty

Since its foundation in 1972, Velleman® acquired extensive

experience in the electronics world and currently distributes its

products in over 85 countries.

All our products fulfil strict quality requirements and legal

stipulations in the EU. In order to ensure the quality, our

products regularly go through an extra quality check, both by an

internal quality department and by specialized external

organisations. If, all precautionary measures notwithstanding,

problems should occur, please make appeal to our warranty (see

guarantee conditions).

General Warranty Conditions Concerning Consumer

Products (for EU):

• All consumer products are subject to a 24-month warranty on

production flaws and defective material as from the original date

of purchase.

• Velleman® can decide to replace an article with an equivalent

article, or to refund the retail value totally or partially when the

complaint is valid and a free repair or replacement of the article

is impossible, or if the expenses are out of proportion.

You will be delivered a replacing article or a refund at the value

of 100% of the purchase price in case of a flaw occurred in the

first year after the date of purchase and delivery, or a replacing

article at 50% of the purchase price or a refund at the value of

50% of the retail value in case of a flaw occurred in the second

year after the date of purchase and delivery.

• Not covered by warranty:

- all direct or indirect damage caused after delivery to the article

(e.g. by oxidation, shocks, falls, dust, dirt, humidity...), and by

the article, as well as its contents (e.g. data loss), compensation

for loss of profits;

- consumable goods, parts or accessories that are subject to an

aging process during normal use, such as batteries

(rechargeable, non-rechargeable, built-in or replaceable), lamps,

rubber parts, drive belts... (unlimited list);

- flaws resulting from fire, water damage, lightning, accident,

natural disaster, etc.…;

- flaws caused deliberately, negligently or resulting from

improper handling, negligent maintenance, abusive use or use

contrary to the manufacturer’s instructions;

- damage caused by a commercial, professional or collective use

of the article (the warranty validity will be reduced to six (6)

months when the article is used professionally);

- damage resulting from an inappropriate packing and shipping

of the article;

- all damage caused by modification, repair or alteration

performed by a third party without written permission by

Velleman®.

• Articles to be repaired must be delivered to your Velleman®

dealer, solidly packed (preferably in the original packaging), and

be completed with the original receipt of purchase and a clear

flaw description.

• Hint: In order to save on cost and time, please reread the

manual and check if the flaw is caused by obvious causes prior

to presenting the article for repair. Note that returning a non-

defective article can also involve handling costs.

• Repairs occurring after warranty expiration are subject to

shipping costs.

• The above conditions are without prejudice to all commercial

warranties.

The above enumeration is subject to modification

according to the article (see article’s manual).

Made in PRC

Imported by Velleman nv

Legen Heirweg 33, 9890 Gavere, Belgium

www.velleman.eu

Tabla de contenidos

Otros manuales de Equipo de iluminación de Luxibel

Luxibel

Luxibel LX109 Manual de usuario

Luxibel

Luxibel B PANEL240WW Manual de usuario

Luxibel

Luxibel LX110 Manual de usuario

Luxibel

Luxibel B 25 Manual de usuario

Luxibel

Luxibel LX103 Manual de usuario

Luxibel

Luxibel PANEL180TW Manual de usuario

Luxibel

Luxibel LX113 Manual de usuario

Luxibel

Luxibel B Blind4 Manual de usuario

Luxibel

Luxibel LX131 Manual de usuario

Luxibel

Luxibel LX120 Manual de usuario

Luxibel

Luxibel LXMH10003 Manual de usuario

Luxibel

Luxibel B Panel240CW Manual de usuario

Luxibel

Luxibel B-Expo350M Manual de usuario

Luxibel

Luxibel LX108 Manual de usuario

Luxibel

Luxibel LX112 Manual de usuario

Luxibel

Luxibel PANEL360TW Manual de usuario

Luxibel

Luxibel B Panel120WW Manual de usuario

Luxibel

Luxibel B Blind2 Manual de usuario

Luxibel

Luxibel LXLP10106 Manual de usuario

Luxibel

Luxibel LXMH10002 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario