Luneau Technology Briot Alta Evolution Manual de usuario
Instructions for cleaning and sterilization
Briot Edger
Alta Evolution / Evolution HC / Attitude I / Attitude II
This instruction guide aims to clean and sterilize your
Alta Evolution, Evolution HC, Attitude I, Attitude II for common use .
For other instructions, please refer to the USER MANUAL of each model.
For your comfort it’s recommended to clean the device regularly. Please clean the instrument following these
instructions. Cleaning conducted by a process other than the one described in this instruction may cause
deterioration or damage to the equipment.
1- Clamping unit and clamping parts
Cleaning of the clamping unit and clamping parts should be done regularly twice a day, or when different persons are working
with the machine - before changing the user. Clean with Cidalkan wipes incl. alcohol. disinfectant or other alternative.
Briot Edger (Alta Evolution / Evolution HC / Attitude I / Attitude II)
df
Briot Blocker (Evolution / Evolution GT / Attitude / Attitude GTS)
The screen must be wiped gently without
applying excessive force.
2- Cleaning of the touchscreen
Clean the screen after every use with Cidalkan wipes or other alternative.
3- Cleaning the ON/OFF switch
The ON/OFF Button at the side (Attitude on the front) should
be cleaned with Cidalkan wipes everytime after switching
off the machine.
Recommendation is to clean it after you take off your
gloves.
Only use the below recommended
solutions. Other solutions may damage or
discolour the device.
LUNEAU TECHNOLOGY OPERATIONS
2 Rue Roger Bonnet-27340 PONT DE L’ARCHE - FRANCE - Tel. + 33 232 989 132 • [email protected] • www. luneautech.com
Wipes - Instructions for use please read carefully !
01 02 03
Take a wipe out of its packaging and close Clean thoroughly by hand wiping. Throw away the wipe.
the packaging tightly after use. Leave the product on for 5 minutes. Change wipe for each medical
Do not rinse. surface or device.
4- Cleaning of the external
body of the device
Please proceed to clean regularly the exterior of the
device. Most important the region around the edging
chamber, the region around the touchscreen and, in
case of the Attitude, the door of the drawer.
Before cleaning the unit, turn it off and unplug it from
the electric outlet.
To clean the plastic surface of the device gently wipe
the top, bottom, and front surfaces.
CMJN (print) : 80 / 0 / 7 / 0
RVB : 0 / 178 / 227
Pantone : 306 C
HEX : #00b2e3
CMJN (print) : 67 / 9 / 100 / 0
RVB : 97 / 167 / 48
Pantone : 369 C
HEX : #61a730
REF. 369113 Cidalkan wipes incl. alcohol.
disinfectant
Standards CE 0459
This document is not contractual - FC001164 - ind 00- April 2020
5- Cleaning of the toolsbox
Proceed to a regular cleaning of the exterior of the
toolsbox and particularly handles.
Este manual sirve para los siguientes modelos
3
Otros manuales de Arista de Luneau Technology
