Lumie Bodyclock Advanced 200 Manual de usuario

OPERATING INSTRUCTIONS

NOTICE D’UTILISATION

BEDIENUNGSANLEITUNG

BRUKSANVISNING

GEBRUIKSAANWIJZING

BCAI0708 14/8/07 18:25 Page 1

OPERATING INSTRUCTIONS

Bodyclock Advanced 200

1 Safety

2 Getting started

3 The display

4 The four control buttons

5 Setting the time

6 Setting the clock to 12 or 24 hours

7 Using the Bodyclock as a reading light

8 Setting the sunrise (to wake you up)

9 Setting the wake-up speed

10 Using snooze

11 Disabling the back-up beeper

12 Setting the sunset (go-to-sleep program)

13 Setting the sunset to end as a nightlight

14 Adjusting the brightness of the clock

display

15 Setting Sleepsound (white noise)

16 Security mode

17 Demo mode

18 Problem solving

19 Programming summary

2|www.lumie.com |lumie careline 0845 658 9292

English

BCAI0708 14/8/07 18:25 Page 2

INTRODUCTION

Congratulations on buying Bodyclock Advanced.With proper use,it

will help regulate your circadian rhythm (sleep/wake pattern),

leaving you feeling more energetic.Thousands of people have

beneﬁted from its positive effects,and it is especially useful in

alleviating the symptoms of theWinter Blues or SAD (Seasonal

Affective Disorder).In clinical trials,dawn simulators like the

Bodyclock Advanced have been shown to improve mood,energy,

productivity and the quality of sleep and awakening.*

Please read these instructions carefully to get the most out of your

Bodyclock Advanced.

*Acta Psychiatr Scand 1993 Jul; 88 (1):67-71

www.lumie.com |lumie careline 0845 658 9292 |3

English

BCAI0708 14/8/07 18:25 Page 3

1Safety

¾Keep the glass globe over the bulb,unless the bulb is cold and the

lamp unplugged.

¾Always use a 60W Max.E14 (SES) candle bulb.

¾The glass globe will be warm to the touch,so keep it clear of

anything that might deteriorate in contact with heat.

¾Keep the Bodyclock away from water and damp.For indoor use only.

¾Don't open the casing for any reason.There are no user-serviceable

parts inside.

2Getting started

¾Removethe 'globe',the glass cover over the bulb,with a gentle

upward tug.

¾Screw in the bulb ﬁrmly and replace the globe.

¾Find a good position for the Bodyclock close to the bed-head.

¾Plug the Bodyclock into the mains.The display will ﬂash on and off

until the time has been set.

¾Once you've programmed the Bodyclock Advanced,all settings will

be memorised if the unit is unplugged or if there's a power failure.If

the power is out for a short period,it will even keep track of time.

¾To program the clock Amust be depressed ( not lit).Pressing the

Pbutton repeatedly will take you through each of the

programming options in turn (see 19 for the list of options).Within

the next few seconds press +or –to change the setting.NOTE:the

clock will revert to its normal state if no button is pressed for 12

seconds.

¾When replacing the bulb,always unplug the Bodyclock.Spare

sunshine neodymium bulbs are available from the Lumie Careline.

4|www.lumie.com |lumie careline 0845 658 9292

English

BCAI0708 14/8/07 18:25 Page 4

3The display

Beeper

Wake-up

Current program option

4The four control buttons

Sunrise/Sunset

Program

Option change

5Setting the time

¾Amust beOFF (button depressed).

¾Press Prepeatedly until program message TIME appears.

¾Immediately press +or –to set time.

¾Press Pto move on to the next setting or wait 12 seconds for the

clock to revert to normal.The time is now set.If you are using the

12-hour clock,the PM indicator will light up when the time shown is

between noon and midnight.

www.lumie.com |lumie careline 0845 658 9292 |5

English

BCAI0708 14/8/07 18:25 Page 5

6Setting the clock to 12 or 24 hours

¾The time display is pre-set as a 12-hour clock.If you prefer a 24-hour

clock…

¾Amust be OFF (button depressed).

¾Press Prepeatedly until program message 12hr appears.

¾Immediately press +or –until 24hr appears.

¾Press Pto move on to the next setting or wait 12 seconds for the

clock to revert to normal.

7Using the Bodyclock as a reading light

¾Press +until the lamp is as bright as you want it.

¾To switch off the light,press –until it goes completely dark.

8Setting the sunrise (to wake you up)

¾The wake-up function is ON when Ais elevated and is lit up.

¾Wake-up time is pre-set for 7:00a.m.If you wantadifferent time…

¾Amust be OFF (button depressed).

¾Press Prepeatedly until the program message ALARM TIME

appears.

¾Immediately press +or –until the alarmtime is set.If you are using

the 12-hour clock pay attention to the PM indicator to make sure

you set the correct wake-up time! The PM indicator will light up

when the time shown is between noon and midnight.

¾Press Ptomoveon tothe nextsetting or wait 12 seconds for the

clock to revert to normal.

6|www.lumie.com |lumie careline 0845 658 9292

English

BCAI0708 14/8/07 18:25 Page 6

9Setting the wake-up speed

¾The wake-up sequence is pre-set so the sunrise starts 30 minutes

before wake-up time.

¾To change the speed of the wake-up sequence…

¾Make sure Ais OFF (button depressed).

¾Press Prepeatedly until FADE UP 30 (or 60 or 90 or 15 or

DEMO) appears on the display.

¾Immediately press +or –until the desired wake-up speed appears.

¾Press Pto move on to the next setting or wait 12 seconds for the

clock to revert to normal.

¾Remember to press Aagain so that the wake-up is ON (button

elevated).

10 Using snooze

¾When the beeper sounds,press –once to turnit off and leave the

light on.The beeper will sound again 9 minutes later.

¾If you prefer,when the beeper sounds press and hold –to turn off

the beeper and dim the light.The light will re-illuminate to full

strength over the next 9 minutes then the beeper will sound again.

11 Disabling the back-up beeper

¾To turn the beeper off at wake-up time when it is sounding,press A.

¾The beeper is pre-set to ON,to change this…

¾Amust beOFF (button depressed).

¾Press Prepeatedly until the program message reads BEEP ON.

¾Immediately press +or –until you see BEEP OFF.

¾Press Ptomoveon tothe next setting or wait 12 seconds for the

clock to revertto normal.

¾The beeper symbol is displayed when the beeper is on.

www.lumie.com |lumie careline 0845 658 9292 |7

English

BCAI0708 14/8/07 18:25 Page 7

12 Setting the sunset (go-to-sleep program)

To start the sunset sequence:

¾Press +until the lamp is as bright as you want it.

¾Press AON so button is elevated and is displayed.

¾Sunset will start and the lamp will slowly fade down.The wake-up

sequence will activate at its usual time.

To start the sunset sequence when you don't want the wake-up

sequence (such as on a Friday night):

¾Make sure Ais OFF (button depressed).

¾Press +until the lamp is as bright as you want it.

¾Press +and –together.

¾Sunset will start and there will be no wake-up sequence.

To choose sunset speed:

¾Make sure Ais OFF (button depressed).

¾Press Prepeatedly until program message FADE DOWN 30 (or

60 or 90 or 15)appears.

¾Immediately press +or –until the desired sunset speed appears.

¾Press Pto move on to the next setting or wait 12 seconds for the

clock to revert to normal.

13 Setting the sunset to end as a nightlight

Rather than have the sunset end in darkness,you can set it to act as

anightlight at10% of the intensity of the lamp.

¾Amust be OFF (button depressed).

¾Press Puntil program message NITELITE OFF appears.

¾Immediately press +or –until NITELITE ON is set.

¾Press Pto move on to the next setting or wait 12 seconds for the

clock to revert to normal.

8|www.lumie.com |lumie careline 0845 658 9292

English

BCAI0708 14/8/07 18:25 Page 8

14 Adjusting the brightness of the clock

display

The DISPLAY AUTO mode automatically dims the display at

sleep time (when the light is at a low level and the wake-up or

sunset sequences are set).

¾To set the display to remain bright,then…

¾Amust be OFF (button depressed).

¾Press Puntil the program message DISPLAY AUTO appears.

¾Immediately press +or –until DISPLAY HIGH is set.

¾Press Pto move on to the next setting or wait 12 seconds for the

clock to revert to normal.

15 Setting Sleepsound (white noise)

Sleepsound is a continuous whitenoise 'hiss' sound thatis useful to

mask outside noises when you want to sleep.

¾MakesureAis OFF (button depressed).

¾Press Prepeatedly until program message SOUND OFF

appears.

¾Immediately press +or –until SOUND AUTO appears.This

means the Sleepsound will become quieter with the sunset,falling

silentas the light goes out.

¾Alternatively press +or –until SOUND PERM (sound

permanent) appears.This means whenever you turn the wake-up

on (AON,button elevated),the Sleepsound will be heard.The #

symbol on the displayshowswhen Sleepsound is enabled.

¾To turn the Sleepsound off for just one night …while the hiss sound

is audible,press AIN and immediately OUT again.

www.lumie.com |lumie careline 0845 658 9292 |9

English

BCAI0708 14/8/07 18:25 Page 9

10 |www.lumie.com |lumie careline 0845 658 9292

English

16 Security mode

Allows you to set the Bodyclock Advanced's light to switch on and

off at random between 4pm and 11pm to give the impression the

house is occupied.

¾Amust beOFF (button depressed).

¾Press Puntil the program message SECURITY OFF appears.

¾Immediately press +or –until SECURITY ON is set.

¾Press Pto move on to the next setting or wait 12 seconds for the

clock to revert to normal.The display will now read SECURITY.

¾Pressing any button will cancel security mode.Remember,security

mode is only set if the display reads SECURITY.

17 Demo mode

To demonstrate the Bodyclock Advanced's sunrise and sunset

functions continuously,in short 4 minute cycles (rolling

demonstration mode).

¾Amust beOFF (button depressed).

¾Press +for about 12 seconds until you hear a beep and the program

message reads SUNSET.

¾Tostop the demonstration press +again for about 12 seconds until

you hear 2 beeps and the program message goes blank.

¾You might want todisable the beeper (see 11) before starting this

mode.

¾For a demonstration mode in which the Bodyclock Advanced

operates as normal except the sunrise and sunset take only 2

minutes,set FADEUP DEMO (see 9).In this mode press and

hold Pthen press +brieﬂy to start a sunrise.

BCAI0708 14/8/07 18:25 Page 10

Otros manuales para Bodyclock Advanced 200

Tabla de contenidos

Idiomas:

Otros manuales de Despertador de Lumie

Lumie

Lumie Bodyclock Luxe 700 Manual de usuario

Lumie

Lumie Bodyclock Active 250 Manual de usuario

Lumie

Lumie Sunrise Alarm Manual de usuario

Lumie

Lumie Bodyclock Manual de usuario

Lumie

Lumie GO 75 Manual de usuario

Lumie

Lumie Bodyclock rise 100 Manual de usuario

Lumie

Lumie Bodyclock Classic 150 Manual de usuario

Lumie

Lumie BODYCLOCK IRIS 500 Manual de usuario

Lumie

Lumie bodyclock spark 100 Manual de usuario

Lumie

Lumie Bodyclock rise 100 Manual de usuario

Lumie

Lumie bodyclock glow 150 Manual de usuario

Lumie

Lumie bodyclock glow 150 Manual de usuario

Lumie

Lumie Bodyclock Sunray Manual de usuario

Lumie

Lumie Bodyclock Junior 50 Manual de usuario

Lumie

Lumie Bodyclock Luxe 750FM Manual de usuario

Lumie

Lumie Bodyclock rise 100 Manual de usuario

Lumie

Lumie bodyclock luxe 750D Manual de usuario

Lumie

Lumie Sunrise Alarm Manual de usuario

Lumie

Lumie Bodyclock Starter 30 Manual de usuario

Lumie

Lumie bodyclock spark 100 Manual de usuario

Lumie

Lumie Bodyclock Elite 300 Manual de usuario

Lumie

Lumie Bodyclock shine 300 Manual de usuario

Lumie

Lumie bodyclock spark 100 Manual de usuario

Lumie

Lumie Zest Manual de usuario

Manuales populares de Despertador de otras marcas

Steren

Steren CLK-210 Manual de usuario

COP-USA

COP-USA ALCDVR32-SL Manual de usuario

Philips

Philips HF3505/70 Manual técnico

Casio

Casio PQ-70 Manual de usuario

iHome

iHome IA63 Manual de usuario

Coopers

Coopers 9765 Manual de usuario

ANJANK

ANJANK AC-190 Guía

TFA

TFA 98.1075 Manual de usuario

Sharper Image

Sharper Image 204050 Manual de usuario

Dexford

Dexford RCT200 Manual de usuario

Philips

Philips AJL303/37B Manual de usuario

RST

RST Q754 Manual de usuario

iHome

iHome iKT50 Manual de usuario

Sony

Sony dash HID-B7 Manual de usuario

SVINZ

SVINZ SCC009 Manual de usuario

Clas Ohlson

Clas Ohlson 918863 Manual de usuario

IKEA

IKEA FNURRA Manual de usuario

Timex

Timex T128 Manual de usuario