Lumens PS600 Manual de usuario
PS600
Digital Visualizer
User Manual-English
English - 0
English - 1
TABLE OF CONTENTS
COPYRIGHT INFORMATION................................................................................3
CHAPTER 1 PRECAUTIONS................................................................................4
SAFETY PRECAUTIONS ....................................................................................5
FCC WARNING ................................................................................................5
EN55022 (CE RADIATION)WARNING ............................................................5
CHAPTER 2 PACKAGE CONTENT.....................................................................7T
CHAPTER 3 PRODUCT OVERVIEW...................................................................8
3.1 FRONT VIEW/REAR VIEW................................................................................8
3.2 CONTROL PANEL .............................................................................................9
3.3 I/O CONNECTOR ............................................................................................10
3.4 REMOTE CONTROL ........................................................................................11
CHAPTER 4 INSTALLATION..............................................................................12
4.1 SETUP THE DIGITAL VISUALIZER ...................................................................12
4.2 POWERING ON THE DIGITAL VISUALIZER.......................................................12
4.3 POSITIONING AND TURNING ON THE LAMPS..................................................13
4.4 USING THE MOUSE ........................................................................................13
4.5 USING USB AND RS232 ...............................................................................13
4.6 USING ETHERNET ..........................................................................................14
CHAPTER 5 USING THE DIGITAL VISUALIZER............................................15
5.1 GETTING STARTED ........................................................................................15
5.1.1 Select Input Source .....................................................................15
5.1.2 Lamp adjustment..........................................................................15
5.1.3 Focus...............................................................................................15
5.1.4 PBP ..................................................................................................16
5.1.5 View remote object
：
..................................................................16
5.1.6 View transparency (Film/slide)
：
...........................................17
5.1.7 Brightness......................................................................................17
5.1.8 Text/ Photo mode.........................................................................17
5.1.9 To show the captured image (Storage
Æ
Play) ......................18
5.1.10 To delete the captured image (Storage
Æ
Delete)...............18
5.2 USING THE OSD MENU .................................................................................19
5.2.1 Showing the Main Menu
：
.........................................................19
5.2.2 Adjusting and confirm the settings
：
.....................................19
5.3 OSD MENU ....................................................................................................20
5.4 NETWORK SETTING .......................................................................................22
English - 2
5.5 STORAGE AFTER USE ....................................................................................23
CHAPTER 6 Q & A................................................................................................24
English - 3
Copyright Information
Copyright © Lumens Digital Optics Inc. All rights reserved.
Lumens Digital Optics Inc. is in process the trademark registration of Lumens.
No part of this document may be copied, reproduced, or transmitted by any means,
without prior written permission from Lumens Digital Optics Inc. Except
documentation kept by the purchaser for backup purposes.
In the interest of continuing product improvement, Lumens Digital Optics Inc.
reserves the right to change product specifications without notice. Information in this
document may change without notice.
Products and corporate names appearing in this manual may or may not be
registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners’ benefit, without intent to
infringe.
Disclaimer: Lumens Corporation shall not be liable for technical or editorial errors or
omissions.
English - 4
Chapter 1 Precautions
Always follow these safety instructions when setting up and using the Digital
Presenter:
1. Do not place the Digital Presenter on an unstable trolley, stand or table.
2. Do not use the Digital Presenter near water or source of heat.
3. Use attachments only as recommended.
4. Use the type of power source indicated on the Digital Presenter. If you are
not sure of the type of power available, consult your dealer or local electricity
company for advice.
5. Place the Digital Presenter can be easily unplugged.
6. Always take the following precautions when handling the plug. Failure to do
so may result in sparks or fire.
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
7. Do not overload wall sockets, extensions leads or multi-way plug boards as
this may cause fire or electric shock.
8. Do not place the Digital Presenter where the cord can be stepped on as this
may result in fraying or damage to the lead or the plug.
9. Unplug the projector form the wall socket before cleaning. Use a damp cloth
for cleaning. Do not use liquid or aerosol cleaners.
10. Do not block the slots and openings in the projector case. They provide
ventilation and prevent the Digital Presenter from overheating. Do not place
the Digital Presenter on a sofa, rug or other soft surface or in a built-in
installation unless proper ventilation is provided.
11. Never push objects of any kind through cabinet slots. Never allow liquid of
any kind to spill into the Digital Presenter.
12. Except as specifically instructed in this User’s Manual, do not attempt to
operate this product by yourself. Opening or removing covers may expose
you to dangerous voltages and other hazards. Refer all servicing to licensed
service personnel.
13. Unplug the Digital Presenter during thunderstorms or if it is not going to be
used for an extended period, do not place the Digital Presenter or remote
control on top of beat-emitting equipment or heated objects such as a car
and etc.
14. In the following situations, unplug the Digital Presenter from the wall outlet
and refer servicing to licensed service personnel:
If the power cable or plug becomes damaged or frayed.
If liquid is spilled into it or the Digital Presenter has been exposed to
rain or water.
¾Safety Precautions
Warning: To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture.
This Digital Presenter has a 3 wires AC line Plug. This is a safety feature to ensure
that the plug will fit into the power outlet. Do not try to defeat this safety feature.
If the Digital Presenter will not be used for an extended time, unplug it from the
power outlet.
Caution: To reduce the risk of electric shock. Do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to licensed service Personnel.
This symbol indicates that
dangerous voltage
constituting a risk of
electric shock is present
within this unit.
This symbol indicates that
there are important operating
and maintenance
instructions in this User’s
Manual with this unit.
RISK OF ELECTRIC SHOCK
CAUTION
¾FCC Warning
This Digital Presenter has been certified to comply with the limits for a Class A
computing device, pursuant to Subpart J of Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against a harmful interference when the
equipment is operated in a commercial environment.
¾EN55022 (CE Radiation) Warning
This product is intended for use in a commercial, industrial, or educational
environment. It is not intended for residential use.
English - 5
English - 6
This is a Class A product. In a domestic environment it may cause radio
interference, in which case the user may be required to take adequate measures.
The typical use is in a conference room, meeting room or auditorium.
Chapter 2 Package Content
Please make sure the package comes with the following items when you unpack:
PS600 Quick start guide User Manual
CD Power Cable USB Cable
C-Video Cable VGA Cable Remote Control
English - 7
Chapter 3 Product Overview
3.1 Front View/ Rear View
1. Camera Head
2. Camera Arm
3. Lamp
4. Backlight
5. Remote Control
Slot
6. CF card slot
7. Lamp lock
8. Control Panel
9. Button Function
Guide
10.IR Sensor
English - 8
3.2 Control Panel
1. Power：
Power on/off
2. Source：
Select PC or Camera to Projector
3. Lamp：
Switch / on / off the lamp and backlight
4. Photo/Text：
Select the photo or text mode
5. AF：
Auto Focus
6. Brightness +/–
Brightness Adjustment
7. Zoom + /–
zoom in/out
8. A4/A5：
Speedy zoom to A4/ A5 size
9. AWB/Shift：
AWB is Auto White Balance; Shift function enables
in PBP mode that can be shifted the other half
10. Capture
Capture an image into internal memory
or storage card
11. Freeze
Freeze the live image
12. PBP
Compare the live image and
captured image
13. Menu
Entry the OSD menu
14. Enter：Enter
15. Lock/ Unlock
Enable / Disable the Capture,
PBP, AWB, Freeze etc
English - 9
Tabla de contenidos
