Lumatek Pro DE Reflector Hoja de datos

Assembly Instructions & Parts List

BEFORE ASSEMBLY PLEASE REMOVE ALL PROTECTIVE FILM FROM LEAVES

Remove the top spine cover and place the spine on a

level surface, with the bulb holders facing upwards.

mount holes

Using 12 of the shorter bolts, nuts and washers,

assemble the 4 side panels together, ensuring that the 2

panels with cutouts are opposite each other.

Place the part built shade onto the spine lining up the

mounting holes. The bulb holders should be coming

through the cutouts in the shade.

feed bolts

through here

from shade from ballast

live

earth

neutral

Next, line up the space bar with the mounting holes

of the spine and shade, and then do the same with the

top diffuser plate. Pass one of the long bolts through

the top plate, spacer bar, shade and then spine (in that

order). Secure the bolt from inside the spine with a

nut and washer. Do this with all 4 mounting points on

the spine.

Loosen the gland lock nut and feed your ballasts cable

through the gland.

Next, wire your ballast into your shade ensuring that

both lives, both neutrals, and both earths are securely

connected into the correct place on the connector

block. With no stripped cable showing once the wires

are secured.

Live is marked L

Neutral is marked N

Earth is symbolised with

If unsure, please get a qualied electrician to complete

this stage of the assembly process.

open close

Bolt the spine cover onto the spine housing with 6

small bolts and washers, and tighten with the cable

gland.

To install the bulb, simply slide the bulb holders to

the outside, insert the bulb, and then close the bulb

holders. Please ensure that the bulb is securely located

before moving the shade.

ENGINEERED BY QWOD

www.Lumatek.co.uk

Spine Assembly x1

Top Diffuser Plate

Side Panels x4 (2 Feature Cutout)

Fixings Bag

Space Bar x2

Pro DE Reflector

ENGINEERED BY QWOD

Pro DE Reflector

ENGINEERED BY QWOD

LUMATEK HID SERIES REFLECTOR

Thank you for purchasing a new and exciting product from Lumatek. You are now in

possession of one of the best horticultural reectors available. All of our reectors

undergo strict quality control at all stages of production to ensure that you will receive

a product that performs at the highest levels of expectation. To ensure safe and effective

use please read the complete assembly instructions with great care before attempting to

either assemble or connect to your lighting system.

Safety

• Please be aware that whilst undergoing strict quality control all Lumatek reectors are

made from or contain sheet metal components and as such may contain sharp edges.

We recommend that protective gloves are worn whilst assembling and handling all of

our reectors.

• Lumatek reectors should only be used with HID Lamps and suitable power packs up

to 1000w. Certain reectors can be used with CFL lamps, if unsure please consult your

local supplier.

• When connecting to the rest of your lighting system please ensure that it is isolated

from the power supply.

• Please ensure that there is adequate ventilation in the immediate area surrounding the

reector, under no conditions should you cover the reector.

• There are no user serviceable parts inside the reector, if a problem occurs please

return the reector to the supplier that you purchased it from. Any tampering will

invalidate the reectors guarantee.

• During use the lamp and reector will reach very high temperatures and under no

circumstances should they be touched. Please leave the reector to cool for 30

minutes and isolate from the power supply before handling the shade or bulb.

• Please keep the reector away from Children, pets and water.

• Lumatek reectors are only suitable for indoor use.

Installation

• Before assembly please remove all packaging and protective lms.

• Please ensure power supply to the lighting system is isolated before connecting the

reector.

• Ensure the lamp is securely in position before system turn on, we recommend the use

of protective gloves for this operation. Ensure all marks/ngerprints are removed from

the bulb before turn on.

www.Lumatek.co.uk

Otros manuales de Equipo de iluminación de Lumatek

Lumatek

Lumatek 315W CMH Manual de usuario

Lumatek

Lumatek LUMLED012 Manual de usuario

Lumatek

Lumatek Pro 600 EU/UK Manual de usuario

Lumatek

Lumatek CONTROL PANEL PLUS 2.0 Manual de usuario

Lumatek

Lumatek ATS200W Manual de usuario

Lumatek

Lumatek ZEUS 600W PRO 2.9 Manual de usuario

Lumatek

Lumatek VF650W Manual de usuario

Lumatek

Lumatek ZEUS 465W PRO 2.9 Manual de usuario

Lumatek

Lumatek Zeus 1000W Pro Manual de usuario

Lumatek

Lumatek LUMBC004 Manual de usuario

Lumatek

Lumatek ATS300W Manual de usuario

Lumatek

Lumatek LEDL95211 Manual de usuario

Lumatek

Lumatek ZEUS 600W 2.6 Manual de usuario

Manuales populares de Equipo de iluminación de otras marcas

Brizo

Brizo 8SP-MU-4 Manual de usuario

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manual de usuario

IKEA

IKEA BJÖRKSPIREA Manual de usuario

Laserworld

Laserworld Evolution Series ES-400RGB Manual de usuario

Alien

Alien RG STAR Manual de usuario

EuroLite

EuroLite LED B-40 Manual de usuario

Qazqa

Qazqa Suplux SL 3 Black 103062 Manual de usuario

Commercial Electric

Commercial Electric 54568141 Manual de usuario

CREE LIGHTING

CREE LIGHTING 304 Series Manual de usuario

Goobay

Goobay 49867 Manual de usuario

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manual de usuario

Alkalite

Alkalite Krypton KT-81 Manual de usuario

Clas Ohlson

Clas Ohlson GU10 Manual de usuario

DTS

DTS DELTA 10 F Manual de usuario

ring

ring Solar Steplight Manual de usuario

One Stop Gardens

One Stop Gardens 57696 Instrucciones de montaje

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manual de usuario

SIREM

SIREM Swimeo A2 Manual de usuario