Lucky Star P4SAD Manual de usuario

P4SAD

(SiS 645 Chipset, S-478)

With DDR 266/ 333 Memory

For Pentium®4 400MHz FSB PC System

Main Board

User’s Manual

(Ver.:1.0)

reproduced, transmitted, transcribed, stored in a retrievable system,

or translated into any natural or computer language, in any form or

by any means without prior written permission. This manual and the

information contained here are protected by copyright. All rights

reserved.

Revision History

Revision Date Release Notes

1.0 Dec.-2001 First Official Release

Warning and disclaimer

This manual is designed to provide information about the Pentium®4

main-board. Effort have been made to make this manual as accurate

as possible, but no warranty or fitness is implied. All the information

is provided on an 'as is' basis. The author and his corresponding

publishing company shall have neither liability nor responsibility to

any person or entity with respect to any loss or damages arising

from the information contained in this manual or from the use of the

system board that accompanies it.

Information contained in this manual is subject to change without

notice. The manufacturer of the system board will not be held

responsible for technical or editorial omissions made herein, nor for

the incidental or consequential damages resulting from its

furnishing, performance, functionality or use. Subsequent changes to

this manual will be incorporated into the next edition. We welcome

any suggestion regarding this manual or our computer products.

Trademarks

●Intel®and Pentium®are registered trademarks of Intel®Corporation.

●IBM®is a registered trademark of International Business Machines

Corporation.

●Microsoft®is a registered trademark of Microsoft®Corporation.

●PCI®is a registered trademark of PCI®Special Interest Groups.

●AWARD®is a registered trademark of Award Software Inc.

All other trademarks are the property of their respective owners.

Table of Contents

Chapter 1 Introduction…………………………………………1

1-1 Main Specifications……………………………………………………2

1-2 System Configuration……………………………………………..……4

1-3 Notice of Hardware Installation………….……………………....……5

Chapter 2 Installation……………….……………………….…6

2-1 Component Locations …………………..…………………………..…6

2-2 Layout Reference……………………………………………..………..7

2-3 CPU Installation………………. ……………………………………8

2-3-1 S1: CPU Frequency Selector…………………………………………11

2-3-2 CPU and System Cooling………………………….…………………12

2-4 Connectors………..……………………………………………………13

2-4-1 Front Panel…………………………………………………….………13

2-4-2 Back Panel Connectors………………………………………………15

2-4-3 Power Supply Connector……………………………………………17

2-4-4 Floppy Disk Connector………………………………………………18

2-4-5 IDE1 and IDE2………………………………………………………19

2-4-6 Internal Audio Connecotrs……………………………………………20

2-4-7 IR1: IrDA Connector…………………………………………………21

2-4-8 WOL1:WakeUp On LAN (Optional)………………………………22

2-5 Memory…………………………………………………………………2

2-5-1 Memory Installation…………………………………………………24

Chapter 3 Software Installation………………………………25

3-1 Notice of Driver Installation…………………………………………25

3-2 How to Install Software Drivers…………………………………….26

Chapter 4 The BIOS…..………………………………………28

4-1 Updating the BIOS……………………………………………………29

4-2 The CMOS Memory…………………………………………………30

4-3 The BIOS Setup Pages………………………………………………32

4-3-1 Standard CMOS Setup………………………………………………35

4-3-2 BIOS Features Setup…………………………………………………39

4-3-3 Chipset Features Setup………………………………………..……43

4-3-4 Integrated Peripherals………………………………………..……...46

4-3-5 Power Management Setup………………………………………….51

4-3-6 PNP/PCI Configuration Setup……………………………………….54

4-3-7 PC Health Status……………………………………………………56

4-3-8 Frequency/Voltage Control.…………………………………………57

4-3-9 Passwords Setting……………………………………………………..59

Chapter 5 Appendix………………………………….………61

5-1 Memory Map………………………………………………….………61

5-2 I/O Map………………………………...….………………………….62

5-3 Time & DMA Channels Map…………………………………………63

5-4 Interrupt Map………………………………………….……………...64

5-5 RTC & CMOS RAM Map………………………………………….65

5-6 ISA I/O Address Map……………………………………………..66

Chapter 6 Q & A…………………………………………………………………68

Important Warnings:

STOP

WARNING: NEVER run the processor without the heatsink properly and firmly

attached. This will damage the processor within SECONDS. Also do NOT try to use

Pentium Heatsinks, these will NOT fit and do NOT provide adequate cooling.

STOP

WARNING: Make sure your power supply can deliver the power your system needs.

We recommend AT LEAST a 250W power supply. Even better, get a 300W power

supply, especially when using many peripherals.

Chapter 1 Introduction

Thank you for purchasing this high quality motherboard, we are confident that you will be

able to use this motherboard to your full satisfaction. This manual is divided into 6 main

sections, as described below:

Introduction

The introduction contains information on the main specifications for this motherboard, the

package contents and cautionary notes.

Hardware Installation

The Hardware Installation section is the most important in the manual. It describes in detail

how to set the motherboard up for operation. Read all information and follow all steps,

especially if you are a new user.

Software Installation

The software section describes the drivers that need be installed to make your OS operates

properly. The drivers are provided on the driver CD.

BIOS Setup

Information on how to enter the BIOS setup and change settings is given here. In addition

all individual BIOS items are described. Although some BIOS setting information is given

in the hardware installation section where appropriate, refer to the BIOS Setup Section for

details.

Appendix

Provides useful information

Q & A

1-1 Main Specifications

 PCB board size and form factor: 24.5cm x 30.5cm, ATX type.

 PCB layer: 4 layers

 Supported CPUs

Can support the latest 400MHz system bus Socket-478 Intel P4 CPUs up to 2.2GHz or

higher speed.

 Chipset Northbridge

The SiS®645 Host & Memory & AGP controller integrates a high performance host

interface for Intel Pentium 4 processor, a high performance memory controller, an AGP

interface, and SiS MuTIOL Technology connecting with SiS 961 MuTIOL Media IO. It

dispatches transactions to Memory, I/O interface and AGP bus.

 Chipset Southbridge

The SiS 961 supports PCI Rev2.2 specification at 33MHz. The integrated IDE controllers

feature Dual Independent IDE channels supporting PIO mode 0, 1, 2, 3, 4 and Ultra DMA

33/ 66/ 100MHz; AC97 audio codec (using the on-board ALC201A audio codec); USB

controller with root hub and four function ports.

 Memory

This motherboard comes equipped with three Double Data Rate (DDR) Memory Module

sockets to support DDR 200MHz/ 266MHz/ 333MHz-compliant (128, 256MB, or 512MB)

DDR Modules up to 3GB.

 AGP (Accelerated Graphics Port)

This motherboard comes with an AGP slot with support for AGP cards for high

performance. The AGP 66MHz 4X mode is supported as well, further increasing system

performance.

 PCI Expansion Slots

With six 32-bit PCI (Rev. 2.2) expansion slots, which can support Bus Master PCI cards,

such as LAN or Video-grabber cards (PCI supports up to 133MB/s maximum throughput),

this motherboard is ready for the most demanding applications.

 CNR Slot

A Communication Networking Riser (C.N.R.) slot can be fitted with CNR MODEM, or

MODEM/ LAN 10/100M card.

 USB interface

With support for up to 4 USB ver 1.1 ports, two on-board, this motherboard provides ample

USB expansion room.

 IDE interface

This motherboard comes with an onboard PCI Bus Master IDE controller with two

connectors that support four ATA66/ 33 devices on two channels. Supports UDMA/66,

UDMA/33, PIO Modes 3 & 4 and Bus Master IDE DMA Mode 2, and Enhanced IDE

devices, such as CD-R/ RW, DVD-ROM, CD-ROM, Tape Backup and LS-120 drives. An

IDE-3/4 RAID function is optional.

 Super Multi-I/O

This functionality is integrated into the southbridge of the chipset. It provides two high-

speed UART compatible serial ports and one parallel port with EPP and ECP capabilities.

 Infrared (IrDA) Connector

This functionality is also integrated into the southbridge of the chipset. The IrDA connector

supports an optional IR remote control device for wireless interfacing with external

peripherals, personal gadgets, or an optional remote controller.

 System BIOS

This motherboard comes with a 2MB BIOS that provides CPU/ SDRAM frequency, boot

block write protection, and HD/ SCSI/ CD/ Floppy boot selection. DMI is also supported

through BIOS, which allows hardware to communicate within a standard protocol creating

a higher level of compatibility.

 Special Function

A. Over 300W P4 type power supply is needed, meanwhile over 250W PIII type

power supply is acceptable but not guaranteed for proper function.

B. AC-97 Sound Codec chip provides “ amplifier“ function.

1-2 System Configurations

Below is the SiS 645 chipset based system configuration:

SiS

645

Intel Pentium 4 processor

System Bus

3.2GB/s

2.1GB/sec or

2.7GB/sec

8-Bit Hub

Interface

26MB/s

AGP4X (1.5V)

1.06GB/s

DDR266/333

SiS

961

A GP

Graphics

AC-97 Modem CODEC

(optional)

2 ATA100 IDE Channels

4 USB 1.1 Ports

PCI Bus

SIO Flash

BIOS

DDR266/333

1-3 Notice of Hardware Installation

Before hardware installation, make sure you have checked the following things.

A. Check the package

If any of these items is missing or damaged, contact the dealer from whom you purchase.

Leave this main board in its original package until you are ready to install it. In the

package, there are:

➨

This motherboard

➨

1 Manual

➨

1 Driver Installation CD-ROM

➨

1 IDE ATA 66/100 Flat-Cable

➨

1 Floppy Disk Drive Flat-Cable

B. Make sure power is off.

During hardware installation, be sure that there is no power connected during this period.

C. Avoid ESD (Electrical Static Discharge.)

While installing the main board, wear a grounded wristband or ankle strap to avoid ESD

(Electrical Static Discharge).

Tabla de contenidos

Otros manuales de Placa madre de Lucky Star

Lucky Star

Lucky Star P4A845S Manual de usuario

Lucky Star

Lucky Star KTAPRO Manual de usuario

Lucky Star

Lucky Star 6P2LX Manual de usuario

Lucky Star

Lucky Star K7VA133 Manual de usuario

Lucky Star

Lucky Star 6VPM1 Manual de usuario

Lucky Star

Lucky Star 6P2BX2 Manual de usuario

Lucky Star

Lucky Star P4VMD+ Manual de usuario

Lucky Star

Lucky Star K7VAT Manual de usuario

Lucky Star

Lucky Star 6M810 Manual de usuario

Lucky Star

Lucky Star P4A845S Manual de usuario

Lucky Star

Lucky Star 5V-1B Manual de usuario

Lucky Star

Lucky Star K7VAT Manual de usuario

Lucky Star

Lucky Star 6B810E Manual de usuario

Lucky Star

Lucky Star 6ABX3 Manual de usuario

Lucky Star

Lucky Star 6VA693T Manual de usuario

Lucky Star

Lucky Star 5MVP4 Manual de usuario

Lucky Star

Lucky Star 6VA693AM Manual de usuario

Lucky Star

Lucky Star 6VA694 Manual de usuario

Lucky Star

Lucky Star 5MVP3 Manual de usuario

Lucky Star

Lucky Star 6VA693A Manual de usuario

Lucky Star

Lucky Star 6B810E Manual de usuario

Lucky Star

Lucky Star 6MZX1 Manual de usuario

Manuales populares de Placa madre de otras marcas

DFI

DFI SD170 Manual de usuario

ASROCK

ASROCK ROMED8-2T Manual de usuario

Asus

Asus P2L97A Manual de usuario

Winmate

Winmate IC70 Manual de usuario

Asus

Asus MES-B Manual de usuario

Grantech

Grantech SYS8F377VGGA-3OMN Manual de usuario

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manual de usuario

Gigabyte

Gigabyte GA-9IVDT Manual de usuario

Texas Instruments

Texas Instruments ADS8372EVM Manual de usuario

Commell

Commell MS-C73 Manual de usuario

IBT Technologies

IBT Technologies MB860 Manual de usuario

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manual de usuario

Biostar

Biostar M7VIT Bravo Instrucciones de funcionamiento e instalación

Intel

Intel D33217CK Manual de usuario

Asus

Asus F1A55-M LX PLUS R2.0 Manual de usuario

EPC

EPC EPC9147C Manual de usuario

Asus

Asus EX-B760M-V5 D4 Manual de usuario

EPOX

EPOX MU-8KHA0010 Manual de usuario