Lucent Technologies LambdaXtreme Hoja de especificaciones

LambdaXtreme

™Transport

Alarms, Messages, and Trouble Clearing

Guide

Release 1.1

365-575-783R1.1

Issue 1

June 2002

Lucent Technologies - Proprietary

This document contains proprietary information

of Lucent Technologies and is not to be disclosed or used

except in accordance with applicable agreements

Unpublished and Not for Publication

See notice on first age

This material is protected by the copyright and trade secret laws of the United States and other countries. It may not be reproduced, distributed,

or altered in any fashion by any entity (either internal or external to Lucent Technologies), except in accordance with applicable agreements,

contracts or licensing, without the express written consent of Lucent Technologies and the business management owner of the material.

Product Development Manager 1-888-Lucent8 (continental U.S.)

1-317-322-6848 (international)

Notice

Every effort was made to insure that this information product was complete and accurate at the time of printing. However, information is subject

to change.

Mandatory customer information

Interference Information: Part 15 of FCC Rules

NOTE: This equipment is designed to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may

cause interference to radio communications. Operation of this equipment in a residence is likely to cause harmful interference, in which case the

user will be required to correct the interference at his own expense.

Security statement

In rare instances, unauthorized individuals make connections to the telecommunications network. In such an event, applicable tariffs require that

the customer pay all network charges for traffic. Lucent Technologies and its predecessors cannot be responsible for such charges and will not

make any allowance or give any credit for charges that result from unauthorized access.

Trademarks

LambdaXtreme Transport is a trademark of Lucent Technologies.

Limited Warranty

For terms and conditions of sale, contact your Lucent Technologies Account Team.

Ordering information

The ordering number for this information product is 365-575-783R1.1. For ordering information, refer to the “About this information product”

chapter.

Support

Technical support

The Lucent Technologies Customer Technical Assistance Management (CTAM) provides a technical assistance telephone number that is

monitored 24 hours a day. For technical assistance in the continental U.S., call 1-866-LUCENT8 (1-866-582-3688) and select the appropriate

prompt. Outside the continental U.S., please call 1-630-224-4672.

Information product support

Lucent Technologies provides a referral telephone number for support. Use this number to report errors or to ask questions about the

information product. This is a non-technical number. The telephone number is 1-888-LUCENT8.

See notice on first age

Lucent Technologies - Proprietary

See notice on first page

Contents

BOOKMARK1::About this information productAbout this information product

BOOKMARK2::PurposePurpose xvii

BOOKMARK3::Reason for reissueReason for reissue xvii

BOOKMARK4::Safety labelsSafety labels xvii

BOOKMARK5::Intended audienceIntended audience xviii

BOOKMARK6::How to use this information productHow to use this information product xviii

BOOKMARK7::Conventions usedConventions used xix

BOOKMARK8::Related documentationRelated documentation xix

BOOKMARK9::Related trainingRelated training xx

BOOKMARK10::Technical SupportTelephone NumberTechnical Support Telephone Number xxi

BOOKMARK11::Lightwave Safety GuidelinesLightwave Safety Guidelines xxi

BOOKMARK12::Laser Safety and Lucent ProductsLaser Safety and Lucent Products xxvi

BOOKMARK13::Warning and Compliance LabelsWarning and Compliance Labels xxvii

BOOKMARK14::Electrostatic Discharge (ESD)Electrostatic Discharge (ESD) xxxi

BOOKMARK15::Safety InstructionsSafety Instructions xxxiii

BOOKMARK16::How to commentHow to comment xxxv

BOOKMARK17::How to orderHow to order xxxv

....................................................................................................................................................................................................................................

365-575-783R1.1

Issue 1, June 2002 Lucent Technologies - Proprietary

See notice on first page CONTENTS

iii

1BOOKMARK18::1 Alarms and IndicatorsAlarms and Indicators

BOOKMARK19::OverviewOverview 1-1

BOOKMARK20::AlarmsAlarms

BOOKMARK21::OverviewOverview 1-2

BOOKMARK22::Alarm MappingsAlarm Mappings 1-3

BOOKMARK23:: LambdaXtreme ™TransportAlarm GroupsLambdaXtreme™Transport Alarm Groups 1-6

BOOKMARK24::Office Alarms PanelOffice Alarms Panel

BOOKMARK25::OverviewOverview 1-7

BOOKMARK26::Alarm IndicatorsAlarm Indicators 1-8

BOOKMARK27::Status IndicatorsStatus Indicators 1-10

BOOKMARK28::ControlsControls 1-11

BOOKMARK29:: LambdaXtreme ™Transport LEDsLambdaXtreme™Transport LEDs

BOOKMARK30::OverviewOverview 1-12

BOOKMARK31::Power-On LEDPower-On LED 1-13

BOOKMARK32::Circuit Pack LEDsCircuit Pack LEDs 1-14

BOOKMARK33::Office Alarm InterfaceOffice Alarm Interface

BOOKMARK34::OverviewOverview 1-16

BOOKMARK35::InterfacesInterfaces 1-17

BOOKMARK36::Operational CapabilitiesOperational Capabilities 1-18

2BOOKMARK37::2 MaintenanceMaintenance

BOOKMARK38::OverviewOverview 2-1

BOOKMARK39::Maintenance SignalsMaintenance Signals

BOOKMARK40::OverviewOverview 2-2

CONTENTS

iv Lucent Technologies - Proprietary

See notice on first page 365-575-783R1.1

Issue 1, June 2002

BOOKMARK41::Optical Maintenance SignalsOptical Maintenance Signals 2-3

BOOKMARK42::Supervisory SignalSupervisory Signal 2-4

BOOKMARK43::Optical Channel TraceOptical Channel Trace 2-5

BOOKMARK44::JØ Section Trace Identifier (STI)JØ Section Trace Identifier (STI) 2-7

BOOKMARK45::Alarm ReportingAlarm Reporting

BOOKMARK46::OverviewOverview 2-8

BOOKMARK47::Alarms and Status IndicatorsAlarms and Status Indicators 2-9

BOOKMARK48::Equipment FailureEquipment Failure 2-11

BOOKMARK49::Fault IdentificationFault Identification

BOOKMARK50::OverviewOverview 2-12

BOOKMARK51::Fault DetectionFault Detection 2-13

BOOKMARK52::Automatic Fault Isolation and DiagnosticsAutomatic Fault Isolation and Diagnostics 2-14

BOOKMARK53::Loss of Signal (LOS)Loss of Signal (LOS)

BOOKMARK54::OverviewOverview 2-15

BOOKMARK55::Detecting Incoming OTS LOSDetecting Incoming OTS LOS 2-16

BOOKMARK56::Detecting OMS LOSDetecting OMS LOS 2-17

BOOKMARK57::Optical Channel LOSOptical Channel LOS 2-18

BOOKMARK58::SUPVY Link FailuresSUPVY Link Failures 2-19

BOOKMARK59::Control SystemControl System

BOOKMARK60::OverviewOverview 2-23

BOOKMARK61::CIT/Operating System InterfaceCIT/Operating System Interface 2-25

3BOOKMARK62::3 Automatic Power Reduction (APR)Automatic Power Reduction (APR)

BOOKMARK63::OverviewOverview 3-1

BOOKMARK64::APR for a Single-Fiber CutAPR for a Single-Fiber Cut 3-3

365-575-783R1.1

Issue 1, June 2002 Lucent Technologies - Proprietary

See notice on first page CONTENTS

BOOKMARK65::APR for a Two-FiberCutAPR for a Two-Fiber Cut 3-8

BOOKMARK66::APR for Fiber Disconnect within an NEAPR for Fiber Disconnect within an NE 3-12

BOOKMARK67::APR for Circuit Pack Warmup,Removal/Latch Protection, and FailureAPR for Circuit Pack Warmup, Removal/Latch Protection, and Failure 3-14

BOOKMARK68::APR for Port Switch Protection CasesAPR for Port Switch Protection Cases 3-18

BOOKMARK69::Situations when APR is not availableSituations when APR is not available 3-19

4BOOKMARK70::4 Performance MonitoringPerformance Monitoring

BOOKMARK71::OverviewOverview 4-1

BOOKMARK72::Performance ParametersPerformance Parameters

BOOKMARK73::OverviewOverview 4-3

BOOKMARK74::Optical Line Analog Performance ParametersOptical Line Analog Performance Parameters 4-4

BOOKMARK75::Optical Channel Analog Performance ParametersOptical Channel Analog Performance Parameters 4-5

BOOKMARK76::OT Analog ParametersOT Analog Parameters 4-7

BOOKMARK77::OT Digital Performance ParametersOT Digital Performance Parameters 4-8

BOOKMARK78::Supervisory Performance ParametersSupervisory Performance Parameters 4-10

BOOKMARK79::Performance Data ProcessingPerformance Data Processing

BOOKMARK80::OverviewOverview 4-11

BOOKMARK81::Performance Data CollectionPerformance Data Collection 4-12

BOOKMARK82::Analog Parameter BaseliningAnalog Parameter Baselining 4-14

BOOKMARK83::Automatic BaseliningAutomatic Baselining 4-15

BOOKMARK84::Manual BaseliningManual Baselining 4-17

BOOKMARK85::ThresholdsThresholds

BOOKMARK86::OverviewOverview 4-18

BOOKMARK87::Performance Parameter ThresholdsPerformance Parameter Thresholds 4-19

BOOKMARK88::Parameter Threshold ProvisioningParameter Threshold Provisioning 4-21

CONTENTS

vi Lucent Technologies - Proprietary

See notice on first page 365-575-783R1.1

Issue 1, June 2002

BOOKMARK89::QOS Alarm EventsQOS Alarm Events 4-22

BOOKMARK90::Clearing QOS AlarmsClearing QOS Alarms 4-23

5BOOKMARK91::5 Fault Management with Navis™Optical EMSFault Management with Navis™Optical EMS

BOOKMARK92::OverviewOverview 5-1

BOOKMARK93::Fault ManagementFault Management 5-2

BOOKMARK94::The Navis™Optical EMS LogsThe Navis™Optical EMS Logs 5-12

6BOOKMARK95::6 Trouble Clearing TasksTrouble Clearing Tasks

BOOKMARK96::OverviewOverview 6-1

BOOKMARK97::TAPs forthe SLOT, SHELF, and FAN Alarm GroupsTAPs for the SLOT, SHELF, and FAN Alarm Groups

BOOKMARK98::OverviewOverview 6-4

BOOKMARK99::TAP-101: Clear ‘Circuit Pack Failure’TAP-101: Clear ‘Circuit Pack Failure’ 6-5

BOOKMARK100::TAP-102: Clear ‘SIO Failure’TAP-102: Clear ‘SIO Failure’ 6-8

BOOKMARK101::TAP-103: Clear ‘CIO failure’TAP-103: Clear ‘CIO failure’ 6-10

BOOKMARK102::TAP-104: Clear ‘Network controller failure’TAP-104: Clear ‘Network controller failure’ 6-11

BOOKMARK103::TAP-105: Clear ‘Shelf controller failure’TAP-105: Clear ‘Shelf controller failure’ 6-14

BOOKMARK104::TAP-106: Clear ‘Fan failure’TAP-106: Clear ‘Fan failure’ 6-16

BOOKMARK105::TAP-107: Clear ‘FLASH memory module code mismatch’TAP-107: Clear ‘FLASH memory module code mismatch’ 6-17

BOOKMARK106::TAP-108: Clear ‘Flash memory module removed’TAP-108: Clear ‘Flash memory module removed’ 6-21

BOOKMARK107::TAP-109: Clear ‘Circuit Pack Removed’TAP-109: Clear ‘Circuit Pack Removed’ 6-24

BOOKMARK108::TAP-110:Clear ‘OMON Removed’, ‘SUPVY Removed’TAP-110: Clear ‘OMON Removed’, ‘SUPVY Removed’ 6-28

BOOKMARK109::TAP-111:Clear ‘No circuit pack expected in slot’TAP-111: Clear ‘No circuit pack expected in slot’ 6-30

BOOKMARK110::TAP-112:Clear ‘Unexpected circuit pack type’TAP-112: Clear ‘Unexpected circuit pack type’ 6-32

BOOKMARK111::TAP-113:Address ‘Circuit Pack Booting’TAP-113: Address ‘Circuit Pack Booting’ 6-34

BOOKMARK112::TAP-114:Clear ‘OM/OD/OA/RP/RPG warm-up in progress’TAP-114: Clear ‘OM/OD/OA/RP/RPG warm-up in progress’ 6-36

365-575-783R1.1

Issue 1, June 2002 Lucent Technologies - Proprietary

See notice on first page CONTENTS

vii

BOOKMARK113::TAP-115:Clear ‘Power Monitor for N48V_A’ and ‘Power Monitor for N48V_B’TAP-115: Clear ‘Power Monitor for N48V_A’ and ‘Power Monitor for

N48V_B’ 6-39

BOOKMARK114::TAP-116:Clear ‘Circuit Breaker/Power Failure “A or B” or “A and B”’TAP-116: Clear ‘Circuit Breaker/Power Failure “A or B” or “A and

B”’ 6-40

BOOKMARK115::TAPsfor PortOA_RP and LINE Alarm GroupsTAPs for PortOA_RP and LINE Alarm Groups

BOOKMARK116::OverviewOverview 6-44

BOOKMARK117::TAP-201:Clear ‘OTS LOS’ and/or ‘OSC LOS (opposite direction to optical channels)’TAP-201: Clear ‘OTS LOS’ and/or ‘OSC LOS (opposite direction to

optical channels)’ 6-45

BOOKMARK118::TAP-202:Clear ‘DCM LOS’TAP-202: Clear ‘DCM LOS’ 6-48

BOOKMARK119::TAP-203:Clear ‘APR active: line’TAP-203: Clear ‘APR active: line’ 6-52

BOOKMARK120::TAP-204 Clear ‘APR active: OA(preamp)’TAP-204 Clear ‘APR active: OA (preamp)’ 6-55

BOOKMARK121::TAP-205 Clear ‘APR active: OA(OADM-add)’TAP-205 Clear ‘APR active: OA (OADM-add)’ 6-57

BOOKMARK122::TAP-206 Clear ‘APR active: OADCF Raman startup pumps’TAP-206 Clear ‘APR active: OA DCF Raman startup pumps’ 6-59

BOOKMARK123::TAP-207 Clear ‘APR active: RPG Raman co-pumps’TAP-207 Clear ‘APR active: RPG Raman co-pumps’ 6-61

BOOKMARK124::TAP-208 Clear ‘APR active: RPG Raman counter-pumps’TAP-208 Clear ‘APR active: RPG Raman counter-pumps’ 6-62

BOOKMARK125::TAP-209 Clear ‘APR active: RPG Raman co-pumps’TAP-209 Clear ‘APR active: RPG Raman co-pumps’ 6-63

BOOKMARK126::TAP-210: ClearAPR Active Conditions for Fiber DisconnectsTAP-210: Clear APR Active Conditions for Fiber Disconnects 6-65

BOOKMARK127::TAP-211Clear APR Switch Protection ConditionsTAP-211 Clear APR Switch Protection Conditions 6-68

BOOKMARK128::TAP212: Clear ‘TCA optics: OLINE (TOPR-OL)’TAP 212: Clear ‘TCA optics: OLINE (TOPR-OL)’ 6-70

BOOKMARK129::TAP213: Clear ‘TCA optics: OLINE (TOPT-OL)’TAP 213: Clear ‘TCA optics: OLINE (TOPT-OL)’ 6-73

BOOKMARK130::TAP-214: Clear ‘TCAoptics: SUPVY (SPT-SU)’TAP-214: Clear ‘TCA optics: SUPVY (SPT-SU)’ 6-75

BOOKMARK131::TAPs for PortOM_OD Alarm GroupTAPs for PortOM_OD Alarm Group

BOOKMARK132::OverviewOverview 6-77

BOOKMARK133::TAP-301: Clear ‘OMS LOS: all at OA’TAP-301: Clear ‘OMS LOS: all at OA’ 6-78

BOOKMARK134::TAP-302: Clear ‘OMS LOS: 0GHz and 100GHz offsetat OA (preamp)’ and ‘OMS LOS: 50GHz and 150GHz offset at OA (preamp)’TAP-302: Clear ‘OMS LOS: 0GHz and 100GHz offset at OA

(preamp)’ and ‘OMS LOS: 50GHz and 150GHz offset at OA

(preamp)’ 6-81

CONTENTS

viii Lucent Technologies - Proprietary

See notice on first page 365-575-783R1.1

Issue 1, June 2002

BOOKMARK135::TAP-303: Clear ‘OMS LOS: 100GHz offsetat OM (0GHz offset)’TAP-303: Clear ‘OMS LOS: 100GHz offset at OM (0GHz offset)’ 6-85

BOOKMARK136::TAP-304: Clear ‘OMS LOS: 50GHz and 150GHz offsetat OM (0GHz offset)’TAP-304: Clear ‘OMS LOS: 50GHz and 150GHz offset at OM (0GHz

offset)’ 6-89

BOOKMARK137::TAP-305: Clear ‘OMS LOS: 150GHz offsetat OM (50GHz offset)’TAP-305: Clear ‘OMS LOS: 150GHz offset at OM (50GHz offset)’ 6-93

BOOKMARK138::TAP-306: Clear ‘OMS LOS: 0GHz and 100GHz offsetat OD (0GHz offset)’TAP-306: Clear ‘OMS LOS: 0GHz and 100GHz offset at OD (0GHz

offset)’ 6-97

BOOKMARK139::TAP-307: Clear ‘OMS LOS: 50GHz and 150GHz offsetat OD (50GHz offset)’TAP-307: Clear ‘OMS LOS: 50GHz and 150GHz offset at OD

(50GHz offset)’ 6-100

BOOKMARK140::TAP-308: Clear ‘OMS LOS: 100GHz offsetat OD (100GHz offset)’ or ‘OMS LOS: 150GHz offset at OD (150GHz offset)’TAP-308: Clear ‘OMS LOS: 100GHz offset at OD (100GHz offset)’ or

‘OMS LOS: 150GHz offset at OD (150GHz offset)’ 6-104

BOOKMARK141::TAP-309: Clear ‘OMS LOS: drop all at OA(preamp)’TAP-309: Clear ‘OMS LOS: drop all at OA (preamp)’ 6-108

BOOKMARK142::TAP-310: Clear ‘OMS LOS: add 100GHz at OM (OADM 0GHz offset)’TAP-310: Clear ‘OMS LOS: add 100GHz at OM (OADM 0GHz

offset)’ 6-111

BOOKMARK143::TAPs forOCHAN Alarm GroupTAPs for OCHAN Alarm Group

BOOKMARK144::OverviewOverview 6-115

BOOKMARK145::TAP-401: Clear ‘Transmittingoptical channel LOS’TAP-401: Clear ‘Transmitting optical channel LOS’ 6-116

BOOKMARK146::TAP-402: Clear ‘Line side:WaveWrapper path trace identifier mismatch’TAP-402: Clear ‘Line side: WaveWrapper path trace identifier

mismatch’ 6-120

BOOKMARK147::TAP-403: Clear ‘Unexpected channel’TAP-403: Clear ‘Unexpected channel’ 6-122

BOOKMARK148::TAP-404: Clear ‘TCAoptics: OCHAN (SPR-C)’TAP-404: Clear ‘TCA optics: OCHAN (SPR-C)’ 6-123

BOOKMARK149::TAP-405: Clear ‘TCAoptics: OCHAN (SPT-C)’TAP-405: Clear ‘TCA optics: OCHAN (SPT-C)’ 6-127

BOOKMARK150::TAPs forPortOT Alarm GroupTAPs for PortOT Alarm Group

BOOKMARK151::OverviewOverview 6-129

BOOKMARK152::TAP-501:Address Incoming Line-Side Signal FailureTAP-501: Address Incoming Line-Side Signal Failure 6-130

BOOKMARK153::TAP-502: Clear Incoming (LOF/LOS) Signal FailureTAP-502: Clear Incoming (LOF/LOS) Signal Failure 6-133

BOOKMARK154::TAP-503: Clear Drop Side Incoming LOF FailuresTAP-503: Clear Drop Side Incoming LOF Failures 6-137

BOOKMARK155::TAP-504: Clear ‘Add side OC-48/STM-16 client synchronization failure’TAP-504: Clear ‘Add side OC-48/STM-16 client synchronization

failure’ 6-139

365-575-783R1.1

Issue 1, June 2002 Lucent Technologies - Proprietary

See notice on first page CONTENTS

BOOKMARK156::TAP-505: Clear ‘JØ mismatch’TAP-505: Clear ‘JØ mismatch’ 6-143

BOOKMARK157::TAP-506: Clear ‘TCAoptics: OT OC-192/STM-64 (OPR)’TAP-506: Clear ‘TCA optics: OT OC-192/STM-64 (OPR)’ 6-146

BOOKMARK158::TAP-507: Clear ‘TCAoptics: OT OC-192/STM-64 (OPT)’TAP-507: Clear ‘TCA optics: OT OC-192/STM-64 (OPT)’ 6-149

BOOKMARK159::TAPs forSYSTEM and PortOther Alarm GroupsTAPs for SYSTEM and PortOther Alarm Groups

BOOKMARK160::OverviewOverview 6-151

BOOKMARK161::TAP-601: Clear ‘DuplicateTIDs’TAP-601: Clear ‘Duplicate TIDs’ 6-152

BOOKMARK162::TAP-602: Clear ‘Duplicate NENUM Provisioned’TAP-602: Clear ‘Duplicate NENUM Provisioned’ 6-154

BOOKMARK163::TAP-603: Clear ConditionWhen ‘NE ACTY/INFO-N’ LED is LitTAP-603: Clear Condition When ‘NE ACTY/INFO-N’ LED is Lit 6-156

BOOKMARK164::TAP-604: Clear ‘EMS link failure’TAP-604: Clear ‘EMS link failure’ 6-158

BOOKMARK165::TAP-605: Clear ‘EMS Port unavailable’TAP-605: Clear ‘EMS Port unavailable’ 6-160

BOOKMARK166::TAP-606: Clear ‘OMON LOS’TAP-606: Clear ‘OMON LOS’ 6-161

BOOKMARK167::TAP-607: Clear ‘SUPVYtransmitting LOS’TAP-607: Clear ‘SUPVY transmitting LOS’ 6-166

BOOKMARK168::TAP-608: ‘SUPVYData Link Failure’TAP-608: ‘SUPVY Data Link Failure’ 6-170

BOOKMARK169::TAP-609: Clear ‘TopologyConstruction Incomplete’TAP-609: Clear ‘Topology Construction Incomplete’ 6-172

BOOKMARK170::TAP-610:Address ‘Topology Construction In Progress’TAP-610: Address ‘Topology Construction In Progress’ 6-174

BOOKMARK171::TAP-611:Address ‘CPYPGMIPDST’, ‘CPYPGMIPSRC’, ‘SWDIP’, ‘BKUPIP’, ‘RDTIP’TAP-611: Address ‘CPYPGMIPDST’, ‘CPYPGMIPSRC’, ‘SWDIP’,

‘BKUPIP’, ‘RDTIP’ 6-175

BOOKMARK172::TAP-612:Address ‘Test alarm in progress’ and ‘Test LED in progress’TAP-612: Address ‘Test alarm in progress’ and ‘Test LED in progress’ 6-177

BOOKMARK173::TAP-613:Address ‘Provisioned Control Point’ and/or ‘Provisioned Environmental Point’TAP-613: Address ‘Provisioned Control Point’ and/or ‘Provisioned

Environmental Point’ 6-178

BOOKMARK174::TAP-614:Address ‘Reset in progress’TAP-614: Address ‘Reset in progress’ 6-179

7BOOKMARK175::7 Detail Level ProceduresDetail Level Procedures

BOOKMARK176::OverviewOverview 7-1

BOOKMARK177::DLP-601: Connect and Condition Craft Interface Terminal(CIT)DLP-601: Connect and Condition Craft Interface Terminal (CIT) 7-3

BOOKMARK178::DLP-602: TestLEDs on Circuit PacksDLP-602: Test LEDs on Circuit Packs 7-5

CONTENTS

xLucent Technologies - Proprietary

See notice on first page 365-575-783R1.1

Issue 1, June 2002

Tabla de contenidos

Otros manuales de Hardware de red de Lucent Technologies

Lucent Technologies

Lucent Technologies cvMAX-100 Manual de usuario

Lucent Technologies

Lucent Technologies Stinger FS+ Manual de usuario

Lucent Technologies

Lucent Technologies Stinger Manual de instrucciones

Lucent Technologies

Lucent Technologies Stinger Manual de usuario

Lucent Technologies

Lucent Technologies Metropolis Manual de usuario

Lucent Technologies

Lucent Technologies Stinger STGR-LIM-AP-48 Manual de usuario

Lucent Technologies

Lucent Technologies PacketStar PSAX 20 Manual de usuario

Lucent Technologies

Lucent Technologies FT-2000 OC-48 Guía de solución de problemas

Lucent Technologies

Lucent Technologies CellPipe SDSU Manual de usuario

Lucent Technologies

Lucent Technologies CellPipe 40H-CES Manual de usuario

Lucent Technologies

Lucent Technologies Stinger MS+DSL Manual de usuario

Lucent Technologies

Lucent Technologies Stinger MRT Manual de usuario

Lucent Technologies

Lucent Technologies Stinger Trunk Module OC-12/STM-4 Manual de usuario

Lucent Technologies

Lucent Technologies Stinger Manual del operador

Lucent Technologies

Lucent Technologies WaveStar OLS 40G Manual de usuario

Lucent Technologies

Lucent Technologies CellPipe 55 Series Manual de usuario

Lucent Technologies

Lucent Technologies Stinger MRT-36H Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario