LSI 630J Guía de instalación

SGI InfiniteStorage IS2224 Installation and

Overview Guide



007-5830-001

The information in this document supports the SGI InfiniteStorage 2224 (IS2224) storage system.



630J Storage Enclosure

Installation and Overview Guide

46277-00, Rev A

Proprietary Rights Notice

This document contains proprietary information of LSI Corporation. The information contained herein is

not to be used by or disclosed to third parties without the express written permission of an officer of LSI

Corporation.

Document Description

Document 46277-00, Rev. A. March 2010.

This document will remain the official reference source for all revisions and releases of this product until

rescinded by an update.

Disclaimer

It is the policy of LSI Corporation to improve products as new technology, components, software, and

firmware become available. LSI reserves the right to make changes to any products herein at any time

without notice. All features, functions, and operations described herein may not be marketed by LSI in all

parts of the world. In some instances, photographs and figures are of equipment prototypes. Therefore,

before using this document, consult your LSI representative for information that is applicable and

current. LSI DOES NOT ASSUME ANY RESPONSIBILITY OR LIABILITY FOR THE USE OF ANY PRODUCTS

DESCRIBED HEREIN EXCEPT AS EXPRESSLY AGREED TO IN WRITING BY LSI.

LSI products are not intended for use in life-support appliances, devices, or systems. Use of any LSI

product in such applications without written consent of the appropriate LSI officer is prohibited.

License Restriction

The purchase or use of an LSI Corporation product does not convey a license under any patent,

Trademark Acknowledgments

LSI, the LSI logo, HotScale, SafeStore, SANshare, SANtricity, Simplicity, and XBB are trademarks or

registered trademarks of LSI Corporation. All other brand and product names may be trademarks of their

respective companies.

630J Storage Enclosure Installation and Overview Guide i

Contents

CHAPTER 1: PREPARING FOR AN INSTALLATION

Key Terms............................................................................................................................................................1-1

environmental services monitor (ESM)..............................................................................................1-1

storage array................................................................................................................................................1-2

storage enclosure ......................................................................................................................................1-2

Gathering Items ................................................................................................................................................1-2

Basic Hardware............................................................................................................................................1-2

Cables and Connectors ............................................................................................................................1-3

Tools and Other Items..............................................................................................................................1-3

Things to Know – Taking a Quick Glance at the Hardware ...............................................................1-4

CHAPTER 2: INSTALLING THE STORAGE ENCLOSURE

Things to Know – General Installation......................................................................................................2-1

Steps to Install – Storage Enclosure...........................................................................................................2-2

Steps to Install – Drives and Drive Canisters .......................................................................................2-10

Things to Know – Connecting Power Cords........................................................................................2-11

Steps to Connect – Power Cords .............................................................................................................2-12

CHAPTER 3: CONNECTING THE STORAGE ENCLOSURE TO THE HOST

Key Terms............................................................................................................................................................3-1

drive channel...............................................................................................................................................3-1

Things to Know – Connecting the Storage Enclosure to a Host .....................................................3-2

Things to Know – Connecting the Storage Enclosure to Another Storage Enclosure ............3-2

Steps to Connect – Storage Enclosures with the Power Off.............................................................3-3

Steps to Connect – Storage Enclosure with the Power On...............................................................3-4

Things to Know – Basic Cabling Configurations ...................................................................................3-5

ii 630J Storage Enclosure Installation and Overview Guide

CHAPTER 4: TURNING ON THE POWER AND CHECKING FOR PROBLEMS

Steps to Turn On – Power..............................................................................................................................4-1

Steps to Check for Problems – Storage Enclosure ...............................................................................4-2

LEDs on the Storage Enclosure.............................................................................................................4-3

ID Diagnostic Codes on the Seven-Segment Display...................................................................4-8

General Behavior of the LEDs ................................................................................................................4-9

Service Action LEDs................................................................................................................................ 4-11

APPENDIX A: ADDING ASECOND ENVIRONMENTAL SERVICES MONITOR (ESM) CANISTER

630J Storage Enclosure Installation and Overview Guide 1-1

Chapter 1

Preparing for an Installation

Use this document to install the 630J storage enclosure. If you are adding the storage

enclosure to an existing storage array, look at the profile for your storage array. The

profile shows information about the number of drives that are supported by your

storage array, such as the following:

•The number of drives that are currently attached to the host

•The number of drives that you are allowed to add to the host

Make sure that your storage array supports adding more drives.

ATTENTION Possible hardware damage – To prevent electrostatic discharge

damage to the storage enclosure, use proper antistatic protection

when handling the components.

Key Terms

environmental services monitor (ESM)

A canister in the storage enclosure that monitors the status of the components. An ESM

also serves as the connection point to transfer data between the storage enclosure and

the host.

Navigational Aid

“Key Terms“Page1-1

“Gathering Items“Page1-2

“Things to Know – Taking a Quick Glance at the Hardware“Page1-4

Preparing for an Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-2 630J Storage Enclosure Installation and Overview Guide

storage array

A collection of both physical components and logical components for storing data.

Physical components include drives, controllers, fans, and power supplies. Logical

components include volume groups and volumes. These components are managed by

the storage management software.

storage enclosure

One enclosure with drives, one (or optionally, two) environmental services monitor

(ESM), power supplies, and fans. A JBOD storage enclosure does not contain RAID

controllers.

Gathering Items

Before you start the installation, make sure that the hardware items and the software

items have been approved by the original manufacturer. If you need more information,

contact your Customer and Technical Support representative.

Basic Hardware

Basic Hardware and Tools Item

Included with

the Storage

Enclosure

630J storage enclosure with end caps that are

packaged separately.

Mounting rails, clip nuts, and screws

The mounting rails that are available with the

storage enclosure are designed for an industry-

standard cabinet.

Optional

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Gathering Items

630J Storage Enclosure Installation and Overview Guide 1-3

Cables and Connectors

Tools and Other Items

•Labels – To help you to identify cable connections and to more easily trace cables

•A cart – To hold the storage enclosure and its components

•A Phillips screwdriver

•A flat-blade screwdriver

•Antistatic protection

•A flashlight

Item

Included with

the Storage

Enclosure

Power cords

The power cords that are shipped with the storage

enclosure are for connection to an external power

source, such as a wall plug. Your cabinet might

have special power cords that you use instead of

the power cords that are shipped with the storage

enclosure.

SAS cables (for connections within the storage

array)

•Depending on your connection requirements,

you need to purchase additional cables or

cables of different lengths. Consult with your

system supplier.

Not included

Preparing for an Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-4 630J Storage Enclosure Installation and Overview Guide

Things to Know – Taking a Quick Glance at the

Hardware

ATTENTION Risk of equipment malfunction – To avoid exceeding functional and

environmental limits, install only drives that have been approved by

your supplier. Drives might be shipped but not installed. System

integrators, resellers, system administrators, or users can install drives.

IMPORTANT Each storage enclosure in the storage array must have a minimum of

two drives for proper operation. If an enclosure has fewer than two

drives, a power supply error is reported.

Figure 1–1 630J Storage Enclosure – Front View

1 Left End Cap (has the storage enclosure LEDs)

2 Drive Canisters

3 Right End Cap

Figure 1–2 630J Storage Enclosure – Rear View

1 ESM A Canister

2 Host Connector 1

3 Host Connector 2

4 Seven-Segment Display Indicators

5 Serial Connector

6 Ethernet Connector

7 Expansion Port SFF-8088 Connector

8 Power-Fan Canister

9 Power Connector

10 Power Switch

11 Blank ESM B Canister

97001-02

1 3

97002-09

2 3 4 5 761

98 10

8109

Tabla de contenidos

Otros manuales de Recinto de LSI

LSI

LSI 620J Manual de usuario

Manuales populares de Recinto de otras marcas

SilentiumPC

SilentiumPC Armis AR5 Manual

Pulsar

Pulsar 17/TRP80/DSPR Manual de usuario

Thermaltake

Thermaltake V150 TG Manual de usuario

MSI

MSI MPG SEKIRA 500X Manual de usuario

Antec

Antec Dark fleet DF-10 Manual de usuario

Nexans

Nexans WTC05 Manual de usuario

Peavey

Peavey DS 1502 Manual de usuario

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manual de usuario

Rosewill

Rosewill RX82-U(JBOD) Manual de usuario

QNAP

QNAP SAS JBOD CLI 1.0 Manual de usuario

GAMDIAS

GAMDIAS Talos P1 Manual de usuario

Auvs

Auvs KR615 Manual de usuario

Digitus

Digitus DA-71114 Manual de usuario

CommScope

CommScope FDH 3000 Manual de usuario

FS FHD-FWME4 Manual de usuario

JBL

JBL CS1215T Manual de usuario

Pulsar

Pulsar ARAD-S4 Manual de usuario

Pulsar

Pulsar AWO454 Manual de usuario