Lotus CWT-64ETX Manual de usuario
Translation of the original instructions
Installation and operating instructions
PROFESSIONAL ELECTRIC GRILL
CWT-64ETX CWT-66ETX CWT-68ETX
Model LIBR.ISTR.CWTX 60E
Code 563019700
Review 1
Edition date 02/10/2019
Language English
LOTUS S.p.A.
Via Calmaor, 46
31020 San Vendemiano
+39 0438 778020
+39 0438 778277
Contents
Translation of the original instructions
2
Contents
1 INTRODUCTION......................................................................................................................... 3
1.1 Installation drawing...................................................................................................................... 3
1.2 Fixing feet .................................................................................................................................... 6
2 GENERAL INFORMATION......................................................................................................... 7
2.1 Declaration of compliance............................................................................................................ 7
2.2 User information, RAEE Directive on waste electrical and electronic equipment ........................ 8
2.3 Technical data table..................................................................................................................... 8
3 INSTALLATION........................................................................................................................... 9
3.1 Delivery checks ............................................................................................................................ 9
3.2 Removing the packaging ............................................................................................................. 9
3.3 Mechanical installation ................................................................................................................. 9
3.4 Electrical/gas connections ........................................................................................................... 9
4 INSTRUCTIONS FOR USE......................................................................................................... 11
4.1 General information ..................................................................................................................... 11
4.2 Turning the appliance on/off......................................................................................................... 11
4.3 Emptying the container................................................................................................................ 11
4.4 Observations and advice ............................................................................................................. 11
5 MAINTENANCE.......................................................................................................................... 12
5.1 Routine......................................................................................................................................... 12
5.2 Spare parts .................................................................................................................................. 13
6 CLEANING.................................................................................................................................. 14
6.1 Routine cleaning.......................................................................................................................... 14
INTRODUCTION
Translation of the original instructions
3
1 INTRODUCTION
1.1 Installation drawing
FIG. 1 CWT..
A Data Plate
B Electrical connection
INTRODUCTION
Translation of the original instructions
4
WIRING DIAGRAM CWT-6..EX (A)
1 Switch
2 Power supply terminal board
3 Heating element
4 White indicator light
5 Green indicator light
6 Thermostat
INTRODUCTION
Translation of the original instructions
5
Electrical technical data table
MODEL WIRING DIAGRAMS
CWT-64ETX FIG.A
CWT-66ETX FIG.A
CWT-68ETX FIG.A + FIG.A
PREDISPOSITION 440V~3
INTRODUCTION
Translation of the original instructions
6
1.2 Fixing feet
GENERAL INFORMATION
Translation of the original instructions
7
2 GENERAL INFORMATION
2.1 Declaration of compliance
The manufacturer declares that the appliances comply with the requirements of the regulation GAR
2016/426 for the gas part and directive 2014/30/EU,2014/35/EU for the electrical part. Installation must be
performed in compliance with current regulations, especially with regard to ventilation of the premises and
the exhaust gas evacuation system.
·Read the warnings in this manual carefully. They provide important information about safe installation,
use and maintenance.
·The instruction manual must be kept for the entire duration of the equipment and made available to users
for every possible consultation. The manual should be consulted for any information concerning
installation, use and maintenance of the appliance.
·After removing the packaging, check the integrity of the equipment.
·All packaging materials (plastic bags, polystyrene, staples, etc.) must be disposed of in compliance with
current regulations.
·Before connecting the appliance, make sure that the information on the data plate matches the electricity
and gas mains where the appliance is installed. The manufacturer accepts no liability if the
equipment is not connected in accordance with current regulations.
·Always keep all parts of the equipment clean to avoid the risk of oxidation/rust and/or aggression by
chemical agents.
·The equipment must only be used by personnel trained for the purpose.
·The installation must be implemented by professionally qualified personnel in accordance with
the manufacturer's instructions and current reference standards.
·The electrical safety of this equipment is only ensured when it is correctly connected to an effective
ground/earth system as required by current electrical safety standards. The manufacturer cannot be held
liable for any damage caused if the system is not connected to ground/earth.
·Before carrying out any cleaning or maintenance tasks on the equipment, unplug it from the electricity
mains. In the event of faults or malfunctions, always deactivate the appliance.
·Repair work of any kind must only be performed by qualified personnel.
·This appliance must only be used for its expressly intended purpose for cooking or heating food. Any
other use is considered improper.
·The appliance is intended for professional use and must be used by trained personnel.
·The installation and possible transformation to another power supply voltage (if envisaged), or
transformation for operation with another type of gas, must be implemented exclusively by qualified and
authorised professional personnel.
·Before using the appliance, carefully clean all surfaces intended to come into contact with food.
·The manufacturer declines any and all liability for any direct or indirect damage resulting from improper
use of the equipment. The manufacturer declines any and all liability for damage caused by incorrect
installation, tampering, poor maintenance and unskilled use. Moreover, the manufacturer declines any
liability for possible inaccuracies that may be contained in this booklet attributable to errors in
transcription or printing and equally reserves the right to make any changes to the product it deems
useful and/or necessary without compromising its essential characteristics.
·The manufacturer cannot be held liable for any damage caused by failure to comply with these
basic standards and all other use and maintenance standards contained in this booklet.
GENERAL INFORMATION
Translation of the original instructions
8
2.2 User information, RAEE Directive on waste electrical and
electronic equipment
With regard to the regulatory framework of reference of the European Community, we remind the user of the
following:
·Used AAE (Electrical and Electronic Equipment) products must be collected separately
·The user can carry out this collection in the RAEE collection systems and return the equipment to the
distributor when purchasing a new one
·Plus being RoHS compatible, (in accordance with Directive 2011/65/EU on the restriction of the use of
certain hazardous substances in electrical and electronic equipment) the potential effects on the
environment and human health may be due to the misuse of the same equipment or parts of it
·The symbol next to the rating plate indicates the obligation of separate collection
·The penalties provided for in the event of improper disposal of RAEE (Waste Electrical and Electronic
Equipment) are those provided for by the national transpositions of European Directives 2012/19/EU
2.3 Technical data table
Technical data table CWT S60EX
MODEL DIMENSIONS POWER SUPPLY MAXIMUM INPUT
(A)
MAXIMUM
POWER (kW)
Silicon POWER
SUPPLY CABLE
CWT-64ETX 40x60x29h 400V~3 50/60 Hz 6,96 4,8 4 x 1,5 mm²
CWT-64ETX 40x60x29h 440V~3 50/60 Hz 6,3 4,8 4 x 1,5 mm²
CWT-66ETX 60x60x29h 400V~3 50/60 Hz 9,13 6,3 4 x 1,5 mm²
CWT-66ETX 60x60x29h 440V~3 50/60 Hz 8,27 6,3 4 x 1,5 mm²
CWT-68ETX 80x60x29h 400V~3 50/60 Hz 13,91 9,6 4 x 1,5 mm²
CWT-68ETX 80x60x29h 440V~3 50/60 Hz 12,6 9,6 4 x 1,5 mm²
INSTALLATION
Translation of the original instructions
9
3 INSTALLATION
3.1 Delivery checks
On delivery, it is important to check the following:
·External conditions of the packaging
·The general status of the equipment
·The conformity of the model with the information in the technical data plate and the instruction manual
·The conformity of the equipment and components to the order form
3.2 Removing the packaging
While removing the packaging, take care not to damage the appliance. Remove the protective film from the
stainless steel and eliminate any traces of glue. Do not smoke. Perform this operation away from sources of
heat and wear protective gloves. Do not disperse packaging material in the environment, keep it out of the
reach of children and dispose in compliance with current legislation.
3.3 Mechanical installation
Place the appliance on a flat base. Adjust and stabilise the appliance by acting on the support feet. Make
sure that the surrounding walls and/or equipment are capable of withstanding the heat emitted by this
appliance. Connect the water supply (if necessary).
Caution
Do not install the appliance near equipment/machines used in cold processes. If the appliance
has to be installed close to cold process equipment, it is advisable to install non-combustible
thermal insulating material and/or neutral elements between them.
3.4 Electrical/gas connections
Before being offered for sale on the market, the appliance was subjected to gas and electrical testing (as
required). The appliance is supplied without a power cable. The installation technician must connect the
equipment in compliance with current safety regulations on the basis of the power of the appliance.
Note
The ID plate is located in the compartment inside the door for appliances with compartments, or on
the left side for appliances with an oven or a top. A second plate with the model and serial number is
located inside the dashboard and a third is included with the certificate of conformity. The serial
number can also be tracked from the sales document (after 2008). The plate has all the data needed
for correct electrical installation. The installation and possible conversion to another power supply
voltage (if envisaged) must be implemented exclusively by professionally qualified and authorized
personnel. Before using the appliance, carefully clean all surfaces intended to come into contact with
food.
INSTALLATION
Translation of the original instructions
10
Warning
Installation operations, any conversion to other types of gas and start-up must only be
performed by qualified personnel, in accordance with current regulations.
Gas systems, electrical connections and premises where the appliances are installed must comply with
current regulations in the country of installation; in particular, the appliance must be installed in a room with
good ventilation, if possible under a suction hood to ensure complete evacuation of the exhaust gases
formed during combustion. The air required for combustion is 2 m3/h per kW of installed power. The
appliance can be installed alone or in series with other appliances in our production range. A minimum
distance of 10 cm between appliances must be respected to prevent contact with any walls made of
flammable material; furthermore, appropriate measures should also be adopted to ensure the thermal
insulation of flammable parts, such as the installation of heat shields; take special care to ensure that
appliances are installed in an appropriate and safe manner. The support feet can be adjustable in height and
any unevenness can therefore be eliminated.
ELECTRICAL CONNECTION
Caution
In accordance with international provisions, when connecting the appliance an automatic
device must be installed up-line of it so that the device can be fully disconnected from the
mains; this device must have a contact aperture of at least 3 mm.
The connection terminal is located behind the rear wall. Proceed as follows to install the power supply cable:
·Remove the rear panel.
·Pass the new connection cable through the cable gland, connect the leads to the corresponding terminal
on the terminal block and fasten them securely.
·Lock the cable with the cable gland and refit the panel. The earth/ground lead must be longer than the
others so that if the cable gland breaks it is disconnected after the power cables.
Note
Make sure that the mains voltage complies with the data on the appliance's ID plate and that there is
good conductivity to earth/ground. Pay attention when inserting leads to ensure they do not obstruct
the normal course of work and routine appliance cleaning operations. Also make sure that the power
cable is never pulled taut and is not placed in contact with sources of heat.
Note
The connection cable must have the following characteristics: it must be silicone type (to
withstand temperatures of 180 °C), and must have an appropriate cross-section for the power
of the appliance (see technical data table).
EQUIPOTENTIAL
The appliance must be connected to an equipotential system. The connecting screw is located on the rear of
the appliance and is marked by the yellow symbol above it.
Warning
The manufacturer is not liable for and does not indemnify damages caused by incorrect
inadequate installations that do not comply with these instructions.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Parrilla de Lotus
Lotus
Lotus CW-74G Manual de usuario
Lotus
Lotus CW-74ETX Manual de usuario
Lotus
Lotus CW-74ET Manual de usuario
Lotus
Lotus CWT-64ET Manual de usuario
Lotus
Lotus CWT-64ET Manual de usuario
Lotus
Lotus CWT-64G Manual de usuario
Lotus
Lotus CW-94G Manual de usuario
Lotus
Lotus CW-74G Manual de usuario
Lotus
Lotus CWK-74ET Manual de usuario
