LORUS YK06 Manual de usuario
1Dual time: Time in a different time zone can
be set and displayed.
2. Countdown timer: The timer time can be set
up to 23 hours 59 minutes and 59 seconds in
one second increments.
3. Stopwatch: Measures up to 59 minutes 59
seconds and 99 with 1/100 second readout.
4. Alarm: The alarm can be set to ring on a 24-
hour basis.
5. Time/Calendar: Hour, minute, second, date
and day of the week are displayed.
6. Illuminating light:The built-in
electroluminescent backlight illuminates the
display for viewing in the dark.
INSTRUCTION MANUAL
CAL. YK06(R23 SERIES)
NREYK06 12-2001
■CHARACTERISTICS
The display mode changes over in the following
order by pressing button B.
■BUTTONS AND DISPLAYS
MODE
SELECTION
Second
ILLUMINATING LIGHT
ADJUST/
LAP
AM / PM
D
C
Day of the Week Date
ILLUMINATING LIGHT
FOR
3 SECONDS
START/
STOP
Hour Minute
B
A
E
■HOW TO SET THE TIME/CALENDAR
1. Press button B five times to go to the Time
Setting Mode. The second digits start flashing.
2. Adjust the second digits by pressing button C.
Each press of button C advances the digit by one.
To advace the digits quickly, keep button C
pressed.
3. Press button D to confirm the second digits
and move on to the hour setting.
4. Adjust the hour digits and other items in the
same way as Step 2 & 3. Press button C to
adjust the digits and confirm it with button D
and move to the next item.
•The item to be adjusted changes over in the
following order.
6. After all the adjustments are completed, press
button B to return to the Normal Time Display.
Second setting
Press button C simultaneously with a time signal.
The second digits are reset to “00” and start
immediately.
When button C is pressed while the second digits
are between “30” to “59”, one minute is added at
the same time the second digits are reset to “00”.
24H
B
B
Second
Hour
Date
Minute
Day of the
Week
Second Hour Minute
Day of
the Week Date Month
BB
B
B
Dual
Time
Mode
Countdown
Mode
Stop-
watch
Mode
Time
Setting
Mode
Normal
Time
Display
Alarm
Mode
Alarm is ON.
Chime is ON.
Alarm is OFF.
Chime is ON.
Alarm is ON.
Chime is OFF.
1. Press button B once to go to the Alarm Mode.
Mode indicator “AL” appears.
2. Press button D to switch to the Alarm Setting
Display. The hour digits start flashing.
3. Adjust the hour digits with button C.
Each press of button C advances the digit by one.
To advance the digits quickly, keep button C
pressed.
4. Press button D to confirm the hour digits and
move on to the minute setting.
5. Adjust the minute digits with button C and
confirm it with button D in the same way as Step
3 & 4.
6. After all the adjustments are completed, press
button B to return to the Normal Time Display.
24H
Alarm Mode Indicator
Minute
Hour
BD
C
Alarm mark
■HOW TO SET THE ALARM
Alarm engagement/disengagement
In order to engage the alarm, press button C in
the Alarm Mode. The alarm mark appears at
the upper-left corner. The alarm is engaged and
disengaged alternatively.
•The chime can be set to ring on the hour.
To set the chime, press button C in the Alarm
Mode. The chime mark appears at the upper-
left corner.
Chime setting
Chime
mark
Alarm rings for 20 seconds at the designated time.
To stop it manually, press button B,C or D.
Choice of 12-Hour/ 24-Hour indication
•The time display format in either 12-hour
indication or in 24-hour indication can be
selected alternatively by pressing button C in
Normal Time Display.
Under the 12-hour indication format, “PM”
mark appears in the afternoon, but no AM mark
appears in the morning. Therefore,when
setting the hour digits in the 12-hour indication,
be sure that AM/PM is correctly set.
Under the 24-hour indication format, “24H”
mark appears.
■HOW TO SET THE DUAL TIME
•Time in a different time zone can be displayed.
■HOW TO USE THE COUNTDOWN
TIMER
•The timer can be set up to 23 hours, 59
minutes and 59 seconds in one second
increments.
1. Press button B twice to go to the Dual Time
Mode. Mode indicator “ DT ” appears.
2. Press button D to switch to the Dual Time
Setting Display. The hour digits start flashing.
3. Press button C to adjust the hour digits.
Each press of button C advances the digit by one.
To advance the digits quickly, keep button C
pressed.
4. Press button D to confirm the hour digits and
move on to the minute setting.
5. Adjust the minute digits with button C and
confirm it with button D in the same way as
Step 3&4.
6. After all the adjustments are completed, press
button B to return to the Normal Time Display.
Minute
24H
Hour
Dual Time Mode
Indicator
BD
C
Timer setting
Countdown Mode
Indicator
C
DB
Hour Minute
Second
1. Press button B three times to go to the Count-
down Mode. Mode indicator “ TR” appears.
2. Press button D to switch to the Timer Setting
Display. The hour digits start flashing.
Second
3. Press button C to adjust the hour digits.
Each press of button C advances the digit by one.
To advance the digits quickly, keep button C
pressed.
4. Press button D to confirm the hour digits and
move on to the minute setting.
5. Adjust the minute and second digits with button
C and confirm it with button D in the same way
as Step 3 & 4.
The item to be adjusted is shown in the
following order with each press of button D.
Hour Minute Second
6. After all the adjustments are completed, press
button B to return to the Normal Time Display.
Timer Operation
■HOW TO USE THE STOPWATCH
•The stopwatch can measure up to 59 minutes,
59 seconds and 99 in 1/100 second readout.
Stopwatch Mode Indicator
Hour Minute
Second
C
D
B
•Once the timer time is set, it is retained and
can be used repeatedly unless it is readjusted.
✼Stop and restart of the timer can be repeated
by pressing button C. To reset the timer time
before reaching time up, press button D.
✼✼When the timer time is up,the warning sound
beeps for 10 seconds, and automatically reset.
To stop the warning sound manually, press
button B, C or D.
✼✼ Warning
sound beeps for
10 seconds
Time
Up
C
C
C
Start Stop Restart
✼
Press button “B” for four times to go to the Stop-
watch Mode. Mode indicator "ST" appears.
Stopwatch operation
1. Press button C to start the stopwatch.
2. Press button C to stop.
3. Press button D to reset the stopwatch.
Start Stop Reset
CDC
Standard Measurement
24H
■ILLUMINATING LIGHT
Illuminating light
for
3 seconds
Illuminating light
A
E
Display the
Lap time
Reset
Stop
Start
The lap time can be
measured repeatedly
by pressing button D.
3. Press button D to go back to the display of the
measurement in progress.
4. Press button C to stop.
5. Press button D to reset.
1. Press button C to start the stopwatch.
2. To display the lap time, press button D during
the measurement. The lap time is shown on
the display while the measurement is still in
progress internally.
D
Stop and restart of the stopwatch can be repeated
by pressing button C.
•To turn the light on, press button E in any mode.
The electroluminescent backlight illuminates
the display for viewing in the dark.
•For 3-second delayed lighting, press button A
in any mode. The electroluminescent backlight
illuminates the display for 3 seconds and turns
off automatically.
C
Go back to the
display of the
measurement in
progress
D
D
C
Accumulated Elapsed Time Measurement
Lap Time Measurement
✼
CCCCD
Start Stop
Restart
Stop Reset
■LUMIBRITE WATCH
(dial, hands, buttons, case, bezel,
strap, etc.)
✼If your watch is a LORUS LUMIBRITE watch,
it has following features.
LORUS LUMIBRITE watches absorb and store
light energy from natural and artificial light
sources and emit light in the dark. They are made
of environmentally friendly material, and
therefore, are harmless to human beings and the
environment.
•With a full charge, LORUS LUMIBRITE
watches glow in the dark hours longer than
conventional luminous watches of this type.
If exposed to a light of more than 500 lux (i.e.,
the brightness of a typical office) for approxi-
mately 10 minutes, or direct sunlight for 2
minutes, they will glow for hours.
•Since LORUS LUMIBRITE watches emit the
light they store, the brightness will decrease
gradually over time. The length of time they
will glow may also differ slightly depending
on such factors as the brightness of and
distance from the light source used to charge
the watch.
■CARE OF YOUR LORUS WATCH
• BATTERY
■BATTERY CHANGE
The miniature lithium battery SONY or Panasonic
CR2025,which powers your watch, should last
approximately 2 years. However, because it
is inserted at the factory, the actual life of
the battery once in your possession may be
less than 2 years. Be sure to replace the
battery to prevent any possible malfunction
as soon as it runs down. To replace the
battery, we recommend taking the watch to a
local watch repair shop.
This watch contains precise electronic components.
Never attempt to open the case or remove the back
cover.
CAUTION
Do not expose the old battery to
fire or recharge it. Keep it at a
place beyond the reach of child-
ren. If a child swallows it,
consult a doctor immediately.
•WATER RESISTANT
■SERVICE
When your LORUS watch requires repair or
sevicing, please see the enclosed WARRANTY/
GUARANTEE.
*If your watch is 200 M/20 BAR, 100 M/10 BAR
or 50 M/5 BAR water resistant, it is so
indicated on the dial/case back.
NO NO NO
YES
YES
YES NO NO
YES YES NO
Condition
of use
Accidental
contact with
water, such
as splashes
and rain
Swimm-
ing and
taking a
shower
Skin
diving Scuba
diving
Indica-
tion on
the dial/
case back
No
Indication
NO NO NO
YES
•Do not operate the buttons when the watch is
wet.
•If the watch is exposed to salt water, rinse it
in fresh water and then wipe it thoroughly dry.
•Should you find any water or condensation
inside the watch, immediately have it checked.
Water can corrode electric parts inside the
case.
Caution:
Leather straps are not water resistant except so
indicated, even if the watch head is water
resistant.
•ALLERGIC REACTION
Because the case and band touch the skin
directly, it is important to clean them regularly.
If not, shirt sleeves may be stained and those with
delicate skin may develop a rash. Please wear
the watch with some play to avoid any possible
allergic reaction. If you develop a rash on your
wrist, stop wearing and consult a physician.
•MAGNETISM/ STATIC ELECTRICITY
Your watch will not be affected by magnetism
generated by household electric appliances but
keep your watch away from a place where the
watch is subject to strong electric field and static
electricity.
•SHOCKS AND VIBRATIONS
Your watch may be worn for normal sports
activities, However, be careful not to drop it or
hit it on hard surfaces and avoid any severe
impacts.
•TEMPERATURE
Your watch works with stable accuracy within a
temperature range between 0˚C and 50 ˚C. Do not
expose the watch to a place exceeding this
temperature range.
• CLEANING
Use only a soft cloth and clean water for cleaning
your watch. Never use chemicals, especially soap.
WATER
RESISTANT
WATER
RESISTANT
WATER
RESISTANT
(50M/5 BAR)
100M/10 BAR
or above
(
(
NO
Tabla de contenidos
Otros manuales de Mirar de LORUS
LORUS
LORUS V52H Manual de usuario
LORUS
LORUS 1N001 Manual de usuario
LORUS
LORUS VX43 Manual de usuario
LORUS
LORUS Watch Manual de usuario
LORUS
LORUS W150 Manual de usuario
LORUS
LORUS RF8 Series Manual de usuario
LORUS
LORUS Y704 Manual de usuario
LORUS
LORUS V657 Manual de usuario
LORUS
LORUS R23 Series Manual de usuario
LORUS
LORUS ROTARY SLIDE RULE Manual de usuario
LORUS
LORUS LUMIBRITE VD75 Manual de usuario
LORUS
LORUS W136 Manual de usuario
LORUS
LORUS R23 Series Manual de usuario
LORUS
LORUS V810 Manual de usuario
LORUS
LORUS R23 Series Manual de usuario
LORUS
LORUS R23 Series Manual de usuario
LORUS
LORUS RYZ Series Manual de usuario
LORUS
LORUS NREY704E Manual de usuario
LORUS
LORUS VX42 Manual de usuario
LORUS
LORUS Z012 Manual de usuario
