Lorex LTH02 Series Manual de usuario
Handheld Thermal Temperature
Monitoring Camera
LTH02 Series
Manual
lorex.com
EN
I
Foreword
General
This manual introduces the appearance and basic operations of the handheld thermal
temperature monitoring camera (hereinafter referred to as "the Camera").
Safety Instructions
The following categorized signal words with defined meaning might appear in the manual.
Signal Words
Meaning
Indicates a high potential hazard which, if not avoided, will result
in death or serious injury.
Indicates a medium or low potential hazard which, if not
avoided, could result in slight or moderate injury.
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, lower performance, or
unpredictable result.
Provides methods to help you solve a problem or save you time.
Provides additional information as the emphasis and
supplement to the text.
Revision History
Version
Revision Content
Release Time
V1.0.0
First release.
July 2020
About the Manual
●The manual is for reference only. If there is inconsistency between the manual and the
actual product, the actual product shall prevail.
●We are not liable for any loss caused by the operations that do not comply with the manual.
●The manual would be updated according to the latest laws and regulations of related
jurisdictions. For detailed information, refer to the paper manual, CD-ROM, QR code or our
official website. If there is inconsistency between paper manual and the electronic version,
the electronic version shall prevail.
●All the designs and software are subject to change without prior written notice. The product
updates might cause some differences between the actual product and the manual. Please
contact the customer service for the latest program and supplementary documentation.
●There still might be deviation in technical data, functions and operations description, or
errors in print. If there is any doubt or dispute, we reserve the right of final explanation.
●Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
●All trademarks, registered trademarks and the company names in the manual are the
properties of their respective owners.
●Please visit our website, contact the supplier or customer service if there is any problem
occurring when using the device.
●If there is any uncertainty or controversy, we reserve the right of final explanation.
II
Important Safeguards and Warnings
This chapter describes the contents covering proper handling of the Camera, hazard
prevention, and prevention of property damage. Read these contents carefully before using
the Camera, comply with them when using, and keep it well for future reference.
Power Requirements
●All installation and operation should conform to your local electrical safety code.
●Check whether the power supply is correct before operating the Camera.
●The power source shall conform to the requirement of the Safety Extra Low Voltage (SELV)
standard, and supply power with rated voltage which conforms to Limited power Source
requirement according to IEC60950-1. Note that the power supply requirement is subject to
the Camera label.
●Install easy-to-use devices for power off before installing wiring, which is for emergent
power off when necessary.
●Prevent the line cord from being trampled or pressed, especially the plug, power socket
and the junction from the Camera.
●Risk of explosion if the battery is replaced by an incorrect type.
●Replacement of a battery with an incorrect type that can defeat a safeguard (for example,
in the case of some lithium battery types).
●Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery
can result in an explosion.
●High or low extreme temperatures that a battery can be subjected to during use, storage or
transportation; and low air pressure at high altitude.
◇Leaving a battery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of flammable liquid or gas.
◇A battery subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas.
Application Environment Requirements
●Use the Camera within the allowed humidity and altitude.
●Do not use the Camera in the strong vibration environment such as in boats and vehicles.
If you still want to use thermal cameras in the two conditions mentioned above, please contact
our sales staff to buy cameras of special model or cameras that are customized. If you use
cameras in improper environments, we shall not take the costs of camera damage.
●There is a default temperature monitoring range of targets for the Camera. Use the Camera
within the range.
●Use the Camera within the required working temperature and humidity.
●Do not place the Camera in the humid, dusty, extremely hot and cold site with strong
electromagnetic radiation or unstable illumination.
●Do not block the ventilation of the Camera to avoid heat accumulation.
●Do not install the Camera near the heat source such as radiator, heater, and stove to avoid
fire.
III
●Do not aim the lenses at intense radiation source (such as sun, laser, and molten steel) to
avoid damage to thermal detector and visible lens.
●Prevent liquid from flowing into the Camera to avoid damage to the internal components. In
case the liquid entering the Camera, immediately stop using the Camera, cut off the power,
and disconnect all the cables. Then contact the local customer service center.
●Do not stuff foreign materials into the Camera to prevent short circuit which could cause
Camera damage or injury.
●Use the factory default package or material with equal quality to pack the Camera when
transporting the Camera.
●Do not press, vibrate or soak the Camera during transportation, storage and installation.
Operation and Maintenance Requirements
●Do not touch the heat dissipation component of the Camera in case you might get burnt.
●Do not dismantle the Camera; there is no part which can be repaired by users themselves.
It may cause water leakage or bad image for the Camera if it is dismantled
unprofessionally.
●It is recommended to use the Camera together with a lightning arrester, which is to improve
the effect of lightning protection. It needs to conform to the lightning protection regulation
for outdoor application.
●Do not touch the photosensitive Camera with your hands. Use an air blower to clean the
dust on the lens. For further cleaning, pour a little alcohol into a piece of dry cloth with
which you can softly wipe the dirt away.
●Clean Camera body with a piece of soft dry cloth. For any dirt hard to remove, pick up a
piece of clean and soft cloth, dip it with a little neutral detergent and gently wipe the dust
away—after that, wipe all the liquids on the Camera away with another dry cloth. Never use
any volatile solvent such as alcohol, benzene and thinner, or any cleaner that is strong and
abrasive. Otherwise, the Camera’s surface coating will be hurt and its working performance
will be encumbered.
●Use the accessories regulated by the manufacturer. The Camera should be installed and
maintained by professionals.
●Contact the local dealer or the nearest service center if the Camera fails to work normally.
Do not dismantle or modify the Camera.
IV
Table of Contents
Foreword.................................................................................................................................................... I
Important Safeguards and Warnings..................................................................................................... II
1 Checking the Package.......................................................................................................................... 1
2 Structure................................................................................................................................................. 2
2.1 Dimensions.................................................................................................................................... 2
2.2 Appearance.................................................................................................................................... 2
3 Basic Operations................................................................................................................................... 5
3.1 Live Interface................................................................................................................................. 5
3.2 Installing SD Card......................................................................................................................... 6
3.3 Capturing Images.......................................................................................................................... 6
3.4 Recording Videos.......................................................................................................................... 6
3.5 Viewing Images............................................................................................................................. 6
3.6 Viewing Recorded Videos............................................................................................................ 6
3.7 Exporting Images and Recorded Videos.................................................................................... 7
3.8 Upgrade.......................................................................................................................................... 7
3.9 Auto Maintenance......................................................................................................................... 8
4 Temperature Monitoring Configuration.............................................................................................. 9
4.1 Temperature Settings................................................................................................................... 9
4.2 Temperature Monitoring Settings............................................................................................. 10
5 System Settings .................................................................................................................................. 11
1
1 Checking the Package
Check the package according to the following checklist. If you find device damage or any loss,
contact the after-sales service.
Figure 1-1 Package items
Table 1-1 Package items
No.
Name
No.
Name
1
The Camera
2
Adapter
Five plugs are provided for
Chinese, American, European,
Australian, and British standards.
3
USB cable
4
Quick start guide
5
Wrist rope
—
—
2
2 Structure
2.1 Dimensions
Figure 2-1 Dimensions (mm [inch])
2.2 Appearance
Front Panel
Figure 2-2 Front panel
3
Table 2-1 Front panel description
No.
Component
Description
1
Display screen
Displays live interface and menu interface.
2
Power button
●Press and hold the power button to power on
or off the Camera.
●On the live interface, press the power button,
and the Camera goes to the standby state;
under standby state, press any button to wake
up the Camera.
●On the menu interface, press the power
button to go to the submenu interface.
3
Up/Down buttons
●On the live interface, press the up button to go
to the menu interface.
●On the menu interface, press the up or down
buttons to select parameters.
4
Back button
Exit or return to the previous menu.
Side Panel
Figure 2-3 Side panel
Table 2-2 Side panel description
No.
Component
Description
1
Wrist rope hole
Used for threading wrist rope.
2
Tripod port
Used for installing a tripod.
3
Silicon plug
—
4
No.
Component
Description
4
Charging indicator light
●Charging: Red light on.
●Full charging: Green light on.
The battery can be recharged repeatedly, but it
is a wearable product. If the standby time of the
Camera has been greatly reduced, please
contact the after-sales support to replace the
battery.
5
USB port
Used for connecting the USB cable.
6
SD card slot
Used for installing a SD card.
7
Thermal lens
Used for monitoring.
8
Trigger button
●On the live interface, press the button twice to
capture images.
●On the live interface, press the button 3 times
to start recording, and then press 3 times to
stop recording.
●On the menu interface, press the button to
return to the live interface.
●Under standby state, press the button to
wake up the Camera.
5
3 Basic Operations
Interfaces might vary with models and the actual interface shall prevail.
3.1 Live Interface
Figure 3-1 Live interface
Table 3-1 Live interface
No.
Name
1
Recording videos.
2
Temperature unit.
3
Highest temperature spot.
4
Center spot temperature monitoring.
5
Center spot cursor.
6
Recording duration.
7
Color bar.
8
Head detection mode.
9
Time display.
10
SD card status.
11
Battery status.
Tabla de contenidos
