Logitech Zone True Wireless Manual de usuario
CONTENTS
English . . . . . . . . . . . . . . . . .3
Français . . . . . . . . . . . . . . . 13
Español . . . . . . . . . . . . . . . . 23
Português . . . . . . . . . . . . . . 33
KNOW YOUR PRODUCT
Bluetooth® pairing
button
Qi-wireless
charging
Case light indicator
USB-C port for
charging cable
Earbud light indicator
Wind defense
fabric
Control button
Noise-canceling mics
Replaceable eargels
Light indicator
USB-C adapter
USB-A receiver
3English
USB-A USB-C USB-A | USB-C
S
M M
S
LL
USB-A
USB-C
CHARGING
Charging via USB cable
1. Place the earbuds in the charging case
andclose the lid.
2. Plug the USB-C cable end into the USB-C
port on the front of the charging case.
3. Plug the USB-A end into the USB-A charging
port on your computer or plug the USB-A
end into the USB-C adapter and plug
theUSB-C adapter into the USB-C port on
yourcomputer.
4. Case light Indicator will be a pulsing,
whitelight for charging.
5. Case light Indicator will be solid white when
fully charged.
— 2 hrs 45 mins for full earbuds charge
— 3 hrs for full case charge
— 5 mins will give you 2 hrs music time
(ANCo)
6. Earbuds can be used with receiver and
Bluetooth®paired while charging.
Charging via Qi wireless charger
1. Place the charging case on top of any Qi
wireless charging pad.*
2. Case indicator light will be a pulsing,
whitelight when charging.
3. Case Indicator light will be solid white
whenfully charged.
* Qi wireless charging base is not included.
WHAT’S IN THE BOX
1. Left & right ear buds
2. Replaceable eargels (total of 3 pairs):
— Small left & right eargels without ear ns
— Medium left & right eargels with ear ns
(premounted on the earbuds)
— Large left & right eargels with ear ns
3. Cloth travel bag
4. Wireless charging case
5. User documentation
6. USB-A receiver
7. USB-C to A adapter
8. USB-C to A charging cable (0.79 ft)
4English
ZONE
TRUE
WIRELESS
3 sec.
USB-A
USB-C
HOW TO SETUP YOUR DEVICE
1. Remove the earbuds from the charging case.
2. Insert the earbuds into your ears.
PAIR TO SMARTPHONE VIA BLUETOOTH®
1. Press the Bluetooth®pairing button in
thecharging case for 3 seconds. Earbud light
indicator will ash white rapidly.
2. Open Bluetooth®settings on your device.
3. Select Zone True Wireless in discoverable
devices.
4. Once successfully paired, the light indicator
will turn solid white.
PAIR TO COMPUTER VIA USB RECEIVER
1. USB-A
Insert the USB-A receiver into the computer
USB-A port.
USB-C
Insert the USB-A receiver into the USB-C
adapter. Then insert the adapter into
thecomputer USB-C port.
2. Earbuds are pre-paired to the receiver included
in the box. Once successfully paired, the light
indicator on the receiver will remain solid.
5English
S
S
M
S
M
L
FIND YOUR PERFECT FIT
For optimized performance of ANC and comfort ,
select among the three eargel sizes (S, M, L) to nd
the ones that best t your ears. Earbuds ship with
medium eargels.
1. Place the earbuds rmly within your ears. Adjust
angle and depth of the earbuds for the best seal
and comfort.
2. Size down if you feel too much pressure on
yourear, or size up if the earbuds are too loose.
— Note: It is common to use dierent sized
eargels for dierent sides of your ears.
3. Fit Trial
— The earbuds should remain secured and tight
even after shaking your head in all directions.
— Play the same music as a fair comparison of
noise isolation.
Left Right
OR
OR
6English
CALL AND MUSIC CONTROLS
Note:
- Teams activities are only functional when Teams is running on an unlocked computer.
- Media control functionality depends on type of application.
- Call activities are always the rst priority. When two Bluetooth®devices are connected,
thelast active device will override the other.
For UC: Call situations Non-call situations
Action Left earbud Right earbud Left earbud Right earbud
Short press Answer / End call Play / Pause
2 seconds press Reject call Next song
Double taps Mute on / o ANC / Transparency Toggle
Customizable in
Logi Tune Volume up/down
For Microsoft
Teams: Call situations Non-call situations
Action Left earbud Right earbud Left earbud Right earbud
Short press Answer / End call Play / Pause Invoke Teams
2 seconds press Reject call Next song Invoke Teams
Double taps Mute on / o ANC / Transparency Toggle
Customizable in
Logi Tune Volume up/down
Tip: Button customizations and Music EQ controls available in Logi Tune.
7English
ACTIVE NOISE CANCELLATION (ANC)
ANC blocks out the noise around you to help you
concentrate on the task at hand.
1. Double tap the left or right earbud under
non-call situations to switch between ANC
andTransparency mode.
2. There will be a voice prompt when turning ANC
or Transparency mode on.
3. You can also switch between ANC and
Transparency mode via Logi Tune.
2x R/L
ANC
EARBUD LIGHT INDICATOR
Controlling busy light via Logi Tune
Busy light is disabled by default. To activate it:
1. Open Logi Tune.
2. Select “Settings” tab.
3. Click on “Busy light” and select "Active on call".
Earbud Status
White Flashing Bluetooth®pairing mode
Solid Active call*
* Download Logi Tune to activate the busy light.
Bluetooth®
pairing mode
Active call
8English
For UC:
Light Status
White Flashing Incoming call
Solid Active call
Red Solid Mute on
For Microsoft Teams:
Light Status
White Flashing Incoming call
Solid Active call
Red Solid Mute on
Purple Solid
Active Teams call
with other device/
Nocallactivity /
Callonhold
RECEIVER LIGHT INDICATOR
Incoming call
Active call
Mute on
Incoming call
Active call
Mute on
Active Teams call
with other device/
No call activity/
Call on hold
CASE LIGHT INDICATOR
Left LED light: Battery status of the left earbud
Middle LED light: Battery status of the charging case
Right LED light: Battery status of the right earbud
Left earbud
Case
Right earbud
9English
State Light Status
Plugged into power source White Solid Fully charged
Pulsing Not fully charged
Inserting buds in the case White Pulsing for 3 seconds Earbud inserted in the case
Case button pressed and
released (earbuds in the
case)
White Solid for 3 seconds Fully charged
Pulsing for 3 seconds Charging
Red Solid Case battery <20%
Case button pressed and
released (no earbuds in
the case)
White (All lights on)
Solid for 3 seconds
Case battery between 80-100%
Case battery between 50-79%
White (Middle and left light on)
White (Left light on only) Case battery between 20-49%
Red Case battery <20%
Others
White Blinking Pairing mode
Red Blinking while in over-the-air (OTA) mode Device rmware update
Pulsing Charging error
White Blinking while in pairing mode and blinking
WHITE 3 times to conrm factory reset Factory reset
Fully charged
Not fully charged
Earbud inserted in the case
Fully charged
Charging
Case battery <20%
Case battery between
80-100%
Pairing mode
Case battery between
50-79%
Device rmware update
Case battery between
20-49%
Charging error
Case battery <20%
Factory reset
Plugged into power source
Inserting buds in the case
Case button pressed
andrelease
(earbuds in the case)
Others
Case button pressed
andrelease
(no earbuds in the case)
3 sec.
3 sec.
3 sec.
3 sec.
3 sec.
3x
3 sec.
3 sec.
10 English
Otros manuales para Zone True Wireless
3
Tabla de contenidos
Idiomas:
Otros manuales de Auricular de Logitech
