* = optional depending on configuration
Safety reference:
All codes are to be securely stored. Do not use personal data (i.e. Birthdays,
telephone numbers etc.) as the code. Change the factory code before you start using
the safe!
Manipulation Protection
Four consecutive wrong codes initiate a four minutes penalty. During this period LCD
will display the message “PENALTY” and no operation will be allowed.
Time Delay
Values can be changed with Manager Code.
Time delay 0 - 99 minutes; open window 1 - 19 minutes.
Electronic Key
With exception of the Master Code, all codes can be tied to an electronic key. (Entry
unit requires iButton terminal.)
Power Supply
The battery compartment is located in the bottom of the entry unit.
Use 9 V Batteries Type Alkaline or Lithium only!
Lithium batteries provide longer operation.
Alternatively, it is possible to power with an internal large battery box (6 ALKALINE
1.5V batteries) or with power supply and dedicated interface.
Low battery warning
A long beep and the message “BATTERY LOW” indicate the battery i slow and has to
be immediately changed.
Audit
The lock stores the last 5500 operations with time, date, user and operation.
