Lobo Systems MAX-80 Manual de usuario

358

SOUTH FAIRVIEWAVE.. GOLETA CALIFORNIA93117(8051683-1

576

TELEX658

482

MAX-80 OPERATION MANUAL

TRADEMARKS

MAX-80 is a trademark of Lobo Systems, Inc.

CP/M is a registered trademark and CP/M

2.2,

CP/M 3 and CP/M Plus

are trademarks of Digital Research.

GENERAL MILLS is a registered trademark of General Mills Corp.

2-80 is a registered trademark of Zilog Corporation.

LDOS is a trademark of Logical Systems, Inc.

Model I, Model 111, Model 4 and TRS-80 are registered trademarks

of Tandy Corporation.

PUBLISHED BY

LOBO SYSTEMS

358 South Fairview

Goleta, California 93117

Printed in the United States of America. Except as permitted

under the Copyright Act of 1976, no part of this publication may

b.e reproduced or distributed in any form or by

any

means, or

stored

a data base or retrieval system, without the prior

written permission of the publisher.

LOB0

SYSTEMS

VERSION 2.1

MAX-80 OPERATION MANUAL

THE MAX-80

A VERIFIED CLASS A COMPUTING DEVICE

The FCC requires that the following be included in the users'

manual for this computing device:

WARNING: This equipment generates, uses* and can radiate radio

frequency energy and, if not installed and used in accordance

with the instructions manual# may cause interference to radio

communications. It has been tested and found to comply with the

limits for a Class A computing device persuant to Subpart

Part 15 of FCC Rules# which are designed to provide reasonable

commercial environment. Operation of this equipment in a

residential area is likely to cause interference, in which case

the owner, at his or her own expense, will be required to take

whatever measures may be required to correct interference.

LOB0 SYSTEMS VERSION

2.1

MAX-80 OPERATION MANUAL

LOBO SYSTEMS STANDARD HARDWARE WARRANTY

Lobo Systems warrants all of its hardware products against

defects in material and workmanship for ONE YEAR from the date of

purchase. During the ONE YEAR period, Lobo Systems will repair

orr at its election, replace a defective Lobo Systems hardware

product or part at NO CHARGE to the original purchaser, PROVIDED

that the product is returned freight prepaid to Lobo Systems or

to an authorized repair station. Lobo Systems' mailing address

is 358 South Fairview Avenue, Goleta, California 93117.

Telephone (805) 683-1576 for the name and address of your nearest

authorized repair station. In order to obtain warranty

performance, the Lobo Systems hardware product must be returned

in its original packing material and must be accompanied by both

a written description of the defect and proof of the date of

purchase. (If a purchaser needs replacement packing materials,

Lobo Systems will provide them at cost.)

Products available through Lobo Systems, but which are not

manufactured by Lobo Systems, carry the manufacturer's warranty

only.

LIMITATION OF LIABILITIES

The above warranty- does not apply if the product has been

damaged

accident, abuse, misuse, misapplication, or if the

product has been subjected to unusual physical or electrical

stress or has been modified without Lobo Systems' express

approval. The purchaser's remedy is limited to repair or

replacement.

In no event shall Lobo Systems be liable for incidental or

consequential damages, including loss of profits, arising from

the breach of any warranty. THERE ARE NO WARRANTIES WHICH EXTEND

BEYOND THE DESCRIPTION ON THE FACE HEREOF.

DISCLAIMER OF IMPLIED WARRANTIES

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER

WARRANTIES, EITHER WRITTEN, ORAL OR IMPLIED, INCLUDING ANY

WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE.

No representative of the company may change any of the foregoing

and the buyer hereby accepts the product subject to all terms

expressed here.

LOB0

SYSTEMS

VERSION

2.1

MAX-80

OPERATION

MANUAL

DISCLAIMER OF SOFTWARE WARRANTY

Lobo Systems makes no warranties1 express or implied, with

respect to its manuals or the software sold by Lobo Systems or

described in its manuals (collectivelyt the "software"). Lobo

Systems DOES NOT WARRANT the quality, performance,

merchantability, or fitness for purpose of its software, all of

which is sold or licensed strictly AS IS. The entire risk as to

quality and performance of software is with the buyer. Should the

software prove defective or unsatisfactory following purchase,

the buyer (and NOT the

manufacturer, distributor or retailer)

assumes the entire cost of all necessary modification, service or

repair.

Lobo Systems shall have no liability or responsibility to the

buyer or any other person or entity for any liability, loss or

damage caused or alleged to be caused directly or indirectly by

the software

including, but not limited to1 any interruption

of service, loss of business, loss of anticipated profits, or

consequential damages resulting from the use or operation of the

so£tware.

LOB0

SYSTEMS

VERSION

2.1

MAX-80 OPERATION MANUAL

LOB0 SYSTEMS VERSION

2.1

MAX-80

OPERATION MANUAL

MAX-80 OPERATION MANUAL

INTRODUCTION

CONTENTS

TABLE OF CONTENTS

INTRODUCTION

- - -

. . .

. .

. . .

INTRO-1

standard Features of the MAX-80

. . . .

INTRO-3

The MAX-80 Philosophy of Documentation

. .

INTRO-6

About This Manual

. .

. . .

. .

INTRO-7

And If?

. . .

. .

INTRO-8

Manual Overview

. . .

. .

INTRO-9

GLOSSARY

. .

- - - -

. .

- -

INTRO-13

LOB0 SYSTEMS VERSION 2.1

MAX-80

OPERATION MANUAL

LOB0 SYSTEMS

viii

CONTENTS

VERSION

2.1

MAX-80 OPERATION MANUAL INTRODUCTION

INTRODUCTION

The MAX-80 business computer is an exceptional small computer.

It works much faster than the vast majority of microcomputer

systems (including many of the much more expensive 8 and

bit

computers).

It can accomodate a complete range of disk drives, from 3-1/2

inch microfloppies to large 10 Megabyte hard drives. It can even

run up to nine drives at a time

that isr it can keep a very

large amount of information on hand! ready for instant access.

It can operate a huge number of different software packages.

With its standard operating system! the MAX-80 can run programs

from the world's largest collection of software, the CP/M software

base.

With the other operating systems available for it

(DOSPLUSI LDOS and MULTIDOS), the MAX-80 can also use programs

from one of the other extremely large bases of software.

It includes, standard! all of the hardware necessary for

controlling a variety of computer accessories

letter quality

and high speed printersr graphics plottersr telephone

communications modemsr speech synthesizers, scientific and

engineering instrumentation! industrial equipment controllerst

even appliance control modules for turning appliances on and off.

It is fully reconfigurable. The shapes of the letters and

graphics characters used on its video screen may be completely

changed: all of the keys on its keyboard may be redefined; its

commands may be shortened to a single keystroke by the use of its

function keys.

Andr to top it all, the MAX-80 is one of the least expensive

business computers on the market.

LOB0

SYSTEMS

INTRO-1 VERSION 2.1

MAX-80 OPERATION MANUAL INTRODUCTION

TO MAKE THE BEST USE

THE MAX-80, YOU MUST KNOW HOW TO RUN IT-

This manual is the MAX-80 Operations Manual. It describes how to

set up your MAX-80 hardware, how to install its standard CP/M

Plus (CP/M

operating system, how to use the Lobo utilies

that were written especially for the MAX-80, and how to install

applications software (the kind you need to really things) on

CP/M Plus.

This section of the manual presents overall descriptions of the

MAX-80 and its standard

CP/M

operating system. It also gives a

brief glossary of computer terms that are all too often bandied

about without adequate definition. (Please note: we make no

claim to having the official definitions of any of these terms.

These definitions are only what we mean when we bandy these terms

about.

)

LOB0 SYSTEMS VERSION

2.1

Tabla de contenidos

Manuales populares de De oficina de otras marcas

HP m9060n - Pavilion - Elite Hoja de especificaciones

Asus

Asus E210 Series Manual de usuario

Dell

Dell Inspiron 600m Manual de usuario

Dell

Dell Inspiron 3662 Manual de usuario

TotalFlow

TotalFlow uFLO Manual de usuario

HP Presario SV7000 - Desktop PC Manual de usuario

HP ProDesk 400 G5 Manual

Logitech

Logitech MK320 Manual de usuario

Dell

Dell XPS 730 H2C Manual de usuario

Sony

Sony Vaio Series Manual de usuario

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manual de usuario

Alto

Alto MD 250 Manual de usuario

Lenovo

Lenovo ThinkCentre Edge 72 Manual

Lenovo

Lenovo ThinkStation D20 Manual

Arbor Technology

Arbor Technology FPC-7800 Series Manual de usuario

Sony

Sony VAIO VGX-TP1 Series Manual de usuario

Asus

Asus Eee Box B204 Manual de usuario

Dell

Dell Optiplex 9010 All In One Manual de usuario