Lippert Components OneControl Manual de usuario
Rev: 12.11.2017 Page 1 OneControl Tablet Owner's Manual
OneControl® Tablet
OWNER'S MANUAL
Rev: 12.11.2017 Page 2 OneControl Tablet Owner's Manual
Safety and System Information
System Information
The OneControl®tablet is an Android-based device that uses the OneControl®application to bring system controls
and monitoring software to a touchscreen tablet. The OneControl®tablet can access the internet (if available), basic
how-to RV videos, product videos, owner's manuals and many more RV owner's resources. The systems controlled
and monitored by OneControl®include slide-outs, leveling systems, awnings, lighting, temperature, water tanks,
tire pressure, battery levels and many more.
The OneControl®Control Panel is accessed within the OneControl®application on the tablet. When powering on
or waking the tablet, the OneControl®application will run automatically as it is pre-configured to do so. In order for
the OneControl®application to present the operator with the OneControl®Control Panel, there MUST be power to
the coach. This will power the various OneControl®controllers located throughout the unit. This will also power
the wireless hub and enable connectivity with the tablet, ultimately allowing wireless connectivity. Please note that
with power to the coach, the tablet should always be able to gain access to the OneControl®Control Panel when
placed in the docking station due to it being a wired connection. Use this to assist when diagnosing concerns with
the system.
NOTE: After powering up the RV, it may take several minutes (2-5) for the OneControl®tablet and
OneControl®Hub to fully energize and communicate. Please allow this time for the system to
establish communications to ensure swift application operations.
TABLE OF CONTENTS
Safety and System Information 2
System Information 2
Operation 3
Power On/O 3
Connecting the OneControl® Tablet to the OneControl® Wireless Network 4
Wireless Hub and Range Extender 4
Docking Station 4
Applications and Internet 5
OneControl® Control Panel 6
OneControl® Resources 11
Troubleshooting 14
Connecting the Replacement OneControl® Tablet to the OneControl® Wireless Network 14
OneControl®Assembly 15
OneControl®Components 16
OneControl®Components 17
OneControl®Components 18
OneControl®Components 19
OneControl®Components 20
Notes 21
Rev: 12.11.2017 Page 3 OneControl Tablet Owner's Manual
Operation
Power On/Off
1. To power ON the OneControl®tablet, hold and release the power button for 2-3 seconds (Fig. 1).
NOTE: It will take a few moments to start up and load the system.
2. To enter or exit sleep mode, press and release the power button.
NOTE: When in sleep mode, the tablet will continue to draw small amounts of power. If the tablet is going
to be unused for an extended period of time, it is recommended that the tablet be powered "off."
3. To power OFF the OneControl®tablet, press and hold the power button until a utility screen appears
(Fig. 3).
4. Select "Power off" (Fig. 3A).
5. Press “OK” (Fig. 4A) when confirmation box displays: “Your tablet will shut down.”
NOTE: Do not complete the steps to "Factory Reset" your tablet in settings. This will erase all data on your
tablet and VOID the warranty on the tablet.
Reset
Micro USB
Headphone Jack
Power Button
Microphone
Volume Control
TF/Micro SD
Card Port
Fig. 1
Fig. 2
A
A
Fig. 3 Fig. 4
Rev: 12.11.2017 Page 4 OneControl Tablet Owner's Manual
Connecting the OneControl® Tablet to the OneControl® Wireless Network
1. On the OneControl®home page, select “Apps & Internet.”
2. On the "Apps and Internet Browser," select the “WiFi Manager.”
3. Locate the OneControl®Hub (Fig. 5) or Range Extender (Fig. 6) and the label which contains the SSID
and password to the OneControl®system.
4. Match the SSID on the OneControl®Hub (Fig. 5A) or Range Extender (Fig. 6A) to the corresponding
SSID in the "Wifi Manager."
5. Select the SSID and enter the password located on the OneControl®Hub (Fig. 5B) or Range Extender
(Fig. 6B)then press "Connect."
AB
Wireless Hub and Range Extender
The OneControl®system is equipped with a wireless hub and range extender. When powered, the hub and range
extender provide the perimeter of the coach with wireless connectivity. This allows the tablet to effectively send
commands wirelessly to the OneControl® system. The hub and range extender's only purpose is to provide wireless
connectivity. The hub and range extender does not keep configuration data, so when troubleshooting wireless
connection concerns, ensure the tablet can operate the OneControl®Control Panel when housed in the docking
station. Again, as long as there is power to the coach, the OneControl®system should operate from the dock.
Docking Station
The OneControl®system includes a tablet docking station. This is typically mounted near the center of the coach,
and houses the tablet when the wireless operation is unnecessary or during travel. To connect the tablet to the
docking station, open the door on the docking station, and slide the tablet into the sleeve on the door about ¾ of
the way in. Then connect the micro USB plug on the docking station into the micro USB port on the tablet. Slide the
tablet the rest of the way into the sleeve and then close the door. The docking station is wired to the coach power
system, which will charge the tablet during its storage period. The docking station is also wired for communication
with the various controllers in the coach. This allows the tablet to function when stored in the dock without being
reliant on the wireless hub.
Fig. 5
Fig. 6
A
B
Rev: 12.11.2017 Page 5 OneControl Tablet Owner's Manual
A
Connectivity can be viewed:
• From the home menu of the OneControl®application, click on APPS & INTERNET.
• Click on the WI-FI MANAGER icon and you should see something similar to (Fig. 9).
Applications and Internet
1. Locate “Apps & Internet” by scrolling down to the bottom of the screen (Fig. 7).
2. Pressing the “Apps & Internet” (Fig. 7A) will open the “Apps and Internet Browser” (Fig. 8).
From here the "Apps and Internet Browser" will assist in connecting to Wi-Fi, if available. If Wi-Fi is available,
you may proceed in downloading Play Store applications, viewing web pages and email, and setting date/
time.
NOTE: The wireless hub cannot be used as a Wi-Fi hotspot. The OneControl®tablet is Wi-Fi capable and may
be used to access the internet, but a usable Wi-Fi connection MUST be available.
Fig. 7 Fig. 8
Fig. 9
Rev: 12.11.2017 Page 6 OneControl Tablet Owner's Manual
OneControl® Control Panel
NOTE: Password protection will only be on tablets manufactured on or after 7-13-15.
• If the tablet is outside of the dock and connected to the system via WiFi, clicking on “OneControl®Control
Panel” from the main OneControl®screen will show the attached password screen (Fig. 10A). The default PIN is
1234.
• The PIN is not required if the tablet is inside the dock and connected to the USB cable.
• The OneControl®Control Panel screen includes a settings button in the upper-right hand corner (Fig. 11A).
• Clicking the settings button will open the attached settings screen, where the PIN can be changed (Fig. 12).
A
A
Fig. 10 Fig. 11
Fig. 12
Rev: 12.11.2017 Page 7 OneControl Tablet Owner's Manual
A
A. Lighting (if equipped) (Fig. 15):
I. Pressing the highlighted "On" or "Off" on the "Master Light" will turn all lights on or off (Fig.
16A).
II. Pressing the highlighted "On" or "Off" will turn individual lights on or off (Fig. 16B).
NOTE: Status of individual lights is displayed by the light bulb to the left of the light name (Fig. 17A).
A
The control panel will operate various devices connected to the OneControl®system.
1. Locate “OneControl®Control Panel” (Fig. 13).
2. Pressing the “OneControl®Control Panel” (Fig. 13A) will open the “OneControl®Applications” (Fig. 14).
3. Press the icon of the device you wish to operate.
NOTE: Icons that are grayed out are loading and cannot function until loading is complete. Icons will be full
color once loaded.
A
Fig. 13 Fig. 14
Fig. 15 Fig. 16 Fig. 17
B
Rev: 12.11.2017 Page 8 OneControl Tablet Owner's Manual
A
B
C. Leveling (if equipped):
I. Pressing the "Leveling" icon (Fig. 20A) will allow you to access the leveling controller.
II. In order to level the coach, press the "Auto Level" button (Fig. 21A).
A
A
B. Awning (if equipped) (Fig. 18):
I. Pressing "Extend" will extend the awning (Fig. 19A).
II. Pressing "Retract" will retract the awning ( Fig. 19B).
NOTE: If there are multiple awnings on the unit, you will be prompted to select which awning to extend or
retract.
Fig. 18 Fig. 19
Fig. 20 Fig. 21
Rev: 12.11.2017 Page 9 OneControl Tablet Owner's Manual
E. TV Lift (if equipped):
I. Pressing the "TV Lift" icon (Fig. 25A) will allow you to access the TV Lift screen.
II. To raise the TV lift, press the "Up" button (Fig. 26A).
III. To lower the TV lift, press the "Down" button (Fig. 27A).
A
A
D. Rear Stabilizer (if equipped):
I. Pressing the "Rear Stabilizer" icon (Fig. 22A) will allow you to access the rear stabilizer screen.
II. To extend the rear stabilizer, press the "Extend" button (Fig. 23A).
III. To retract the rear stabilizer, press the "Retract" button (Fig. 24A).
A
AA
Fig. 22 Fig. 23 Fig. 24
Fig. 25 Fig. 26 Fig. 27
A
Rev: 12.11.2017 Page 10 OneControl Tablet Owner's Manual
F. Tank Monitor (if equipped):
I. Pressing the "Tank Monitor" icon (Fig. 28A) will allow you to access the tank monitor screen
(Fig. 29).
G. Slide-out (if equipped):
I. Pressing the "Slides" icon (Fig. 30A) will allow you to access the slide-out screen.
II. Select the slide-out you would like to operate (Fig. 31).
A
Fig. 28 Fig. 29
Fig. 30 Fig. 31
A
Otros manuales para OneControl
1
Tabla de contenidos
Otros manuales de Tableta de Lippert Components
