Lionel Union Pacific Fast Freight Manual de usuario

73-0024-250

4/06

CAUTI N—ELECTRIC T Y

N T REC MMENDED F R CHILDREN UNDER EIGHT YEARS F AGE. AS WITH

ALL ELECTRIC PR DUCTS, PRECAUTI NS SH ULD BE BSERVED DURING

HANDLING AND USE T REDUCE THE RISK F ELECTRIC SH CK.

TRA SFORMER RATI GS—INPUT: 120 VAC; 60 HZ NLY.

AC UTPUT: 18 V; 80 VA

Union Paciﬁc Fast Freight

Ready-to-Run Train Set

Owner’s Manual

Featuring

Co gratulatio s!

Congratulations on your purchase of the ready-to-run Union Paciﬁc Fast Freight Train Set with

the TrainSounds sound system! This set features everything you need to get started—a mighty

CW-80 Transformer, a huge loop of FasTrack track, a string of detailed cars, and a powerful Lionel

locomotive. Plus, you get the authentic locomotive sounds of the TrainSounds sound system.

Have fun growing with this complete train set! Start with the set components, then follow

your imagination into your own miniature world. Expand your railroad empire with addition-

al FasTrack track sections, enhance your layout with accessories, lengthen your consist with

extra cars, or operate a new locomotive at the head end of your train! Explore the possibilities

at your authorized Lionel dealer.

Use this Owner’s Manual to learn how to set up, operate, and maintain your train set for

years of reliable operation.

The transformer included with this set should be periodically

examined for conditions that may result in the risk of fire,

electric shock, or injury to persons (such as damage to the

output cord, blades, housing, or other parts). In the event that

such conditions exist, the transformer should not be used until

properly repaired.

Parents!

Union Paciﬁc Fast Freight Train Set Inventory

• 2-8-4 steam locomotive and tender with TrainSounds

• Boxcar

• Coal dump car with coal load

• Single dome tankcar

• Caboose

• CW-80 Transformer with accessory wire

• Two straight FasTrack track sections

• One Uncoupling Track section

• One 5” straight FasTrack track section

• Eight curved FasTrack track sections

• One straight FasTrack terminal track section

• eplacement traction tire

• Owner’s Manual

Union Paciﬁc Fast Freight Train Set Features

• TrainSounds sound system

• Puffing smoke

• Bright headlight

• Forward-Neutral- everse

operation

• Opening boxcar doors

• Operating couplers

• Operating coal dump car

• Lighted caboose interior

Table of co te ts

Creati g your layout

Operating your CW-80 Transformer safely 4

Building your Lionel layout 5

Joining the FasTrack track sections 6

Operating the Uncoupling Track section 6

Wiring your CW-80 Transformer 7-8

Ru i g your trai

Running your train set 9

Experiencing the features of the CW-80 Transformer 10-11

Adding smoke ﬂuid to your locomotive’s smoke generator 12

Coupling 13

Loading the coal dump car 13

Unloading the coal dump car 13

Reverse unit procedure 14

Trai Sou ds sou d system operatio s

Operating the TrainSounds sound system 15

CW-80 Tra sformer operatio s

Powering your layout with the CW-80 Transformer 16

Setting the accessory output 17

Mai tai i g a d servici g your locomotive

Lubricating your locomotive 18

Adding ﬂuid to your locomotive’s smoke stack 19

Replacing your locomotive’s lamp 19

Replacing your locomotive’s traction tires 20

Replacing your Square Window Caboose lamp 21

Troubleshooting 22

Advanced connections: powering two isolated blocks with two transformers 23

Limited Warranty/Lionel Service 24

The following Lionel marks may be used throughout this instruction manual and are protected under

Lione ®, TrainMaster®, Odyssey®, Rai Sounds®, CrewTa k™, TowerCom™, DynaChuff™,

StationSounds™, Pu mor®, E ectroCoup er™, Magne-Traction®, CAB-1®Remote Contro er,

PowerMaster®, Lione ZW®, ZW®, PowerHouse®, TMCC®, Lione vi e™, Lockon®, Wire ess Tether™,

LionMaster®, American F yer®, TrainSounds™

The name FasTrack®is used with permission from Pitsco, Inc.

Operating your CW-80 Transformer safely

Your Lionel CW-80 Transformer is listed by Underwriter’s Laboratory Inc. and has been

carefully designed to ensure peak performance. When using electrical products, basic

safety precautions should be maintained.

Be sure to observe the following guidelines:

• Read the manual thoroughly before using this device.

• This device is not recommended for children under eight years of age.

• Parents should periodically inspect this product for potential hazards and, if necessary,

have them repaired by an authorized Lionel Service Center. In the event that such a condi-

tion exists, the transformer should not be used until it has been properly repaired.

• The CW-80 Transformer is intended to be used indoors. Do not use this device if water is

present. Serious or fatal injuries may result.

• Use the CW-80 Transformer only for its intended purpose.

• The CW-80 Transformer was meant to operate on 120-volt, 60-Hertz power. Do not connect

this product to any other power supply.

• Do not operate the CW-80 Transformer with a damaged cord, plug, or case.

• To avoid the risk of electrical shock, do not disassemble the unit. There are no user service-

able parts inside. If damaged, take this product to an authorized Lionel Service Center. A

list of authorized Service Centers is packed with this unit.

• Do not operate the CW-80 Transformer on your layout unattended. Obstructed accessories

or stalled trains may overheat, resulting in damage to your layout.

• Always unplug the CW-80 Transformer from the power source when not in use.

• Never insert objects into the ventilation slots on this product. Damage to sensitive

electronic components can result.

Creati g your layout

Building your Lionel layout

Your set comes with eight curved, two straight, and one terminal section of track. The set

also includes an Uncoupling Track and a 5” straight track section. Figure 1 provides some

examples of layouts that you can build with these track sections.

By adding more FasTrack track sections, you can create an endless number of exciting

track arrangements for more fun, action, and variety. The railroad empire of your dreams can

quickly become a reality!

Figure 1. Track layout ideas

Figure 2. Add-on Track Pack layouts

FasTrack Add-on Track Packs make it easy to expand your railroad. Each Track Pack

includes all the track sections you need to create a more advanced layout using the sections

included with this set. Refer to Figure 2 to explore the possibilities.

Inner Passing Loop Add-on Track Pack

6-12028

Figure 8 Add-on Track Pack

6-12030

uter Passing Loop Add-on Track Pack

6-12031

Siding Track Add-on Track Pack

6-12044

Track Packs available separately.

Creati g your layout

Joining the FasTrack track sections

FasTrack track sections join together easily. With interlocking roadbed sections and large

rail tabs, the track fits together securely so you always get good electrical contact. Take a

look at Figure 3 to see how to join the track sections.

1. Line up your two sections of track.

2. Insert the rail tabs into the openings at the ends of the corresponding

rails.

3. Press the sections together until the interlocking roadbed snaps into

place.

Figure 3. Joining the track sections

Rail tab

Operating the Uncoupling Track section

Without making any additional connections, your Uncoupling Track is powered through

track power. Be sure that your throttle is set to 10-12 volts (AC) to activate the magnet.

To uncouple or operate your rolling stock, position the trigger disc over the central mag-

net, press the button on the controller, and the magnet will pull the trigger disc downward to

release the coupler or activate the car. Refer to Figure 4.

Do not exceed ten seconds when pressing the button. Holding down the button

for over ten seconds may damage the track section.

Figure 4. Central magnet

Caution!

Central

magnet

Creati g your layout

Wiring your CW-80 Transformer

Connect your FasTrack terminal section to the CW-80 Transformer. Use the wires that are

already attached to the terminal section. Make sure that all connections are secure. Loose

connections can produce extremely high temperatures. For this reason, do not touch the

terminals or track connections during use. Also, do not locate scenery materials such as

lichen or ground foam near the terminals.

1. Feed the wires through the notch in the FasTrack terminal section. Refer to

Figure 5 on page 8.

2. Loosen the red T ACK thumbscrew terminal, then slide the red

spade-shaped connector into position. The thumbscrew post should be positioned

between the “blades” of the spade connector. Tighten the thumbscrew to secure the

connection.

Be sure that the “blades” of the spade connector are in contact with the

thumbscrew post. You may choose to insert one of the blades into the hole in the

post to improve the electrical contact.

3. Loosen the black T ACK thumbscrew terminal, then slide the black

spade-shaped connector into position. Tighten the thumbscrew to secure the

connection.

4. If you need to power an accessory (available separately at your

authorized Lionel dealer), connect the accessory to the ACCESSO Y

thumbscrew terminals. Use the accessory wire included with the CW-80 Transformer.

5. Plug the CW-80 Transformer into your wall outlet (120 volts).

As your layout expands, you may also make power connections with the stripped ends of

wires, placing no more than two wires on each terminal. For best performance on large

layouts, it is recommended that you use 16-gauge wire to connect your CW-80 Transformer to

the track. On larger layouts where several track connections are required, the use of separate

junctions/terminal strips (available at your local electronics store) is recommended to

prevent voltage drops.

To prevent the excessive build up of heat, be sure to select the proper wire gauge

for your layout. Follow these guidelines:

• Track connections must be made with 18-gauge wire or heavier. Larger

layouts require a minimum of 16-gauge wire.

• Use 24-gauge wire only when connecting single accessories that require lower

current.

• When wiring multiple accessories (two or more) or accessories that require

higher current, be sure to use 18- to 16-gauge wire.

Caution!

ote!

Creati g your layout

Wiring your CW-80 Transformer (continued)

120/60z

0~18VAC



0~18VAC

TRACK ACCESSORY

Figure 5. Controller connections

FasTrack terminal section

Notch

Spade-shaped

connector

Ru i g your trai

Running your train set

With track power off, place your trai set o the track.

Refer to page 13 for information on coupling the cars.

Power up your locomotive with your tra sformer.

Your locomotive is designed to operate on 7-15 volts alternating cur-

rent. Virtually all Lionel and Lionel-compatible alternating-current transformers

are suitable.

Do not power your locomotive with direct current (DC) transformers.

The locomotive was designed for use with alternating current (AC)

transformers only.

Move ‘em out!

Get your locomotive moving. Your locomotive goes through a repeating pattern

of operations: forward, neutral, reverse, neutral, and so on. To sequence the reverse

unit, press the DIRECTION button on your transformer, or briefly bring the throttle

all the way back to the OFF position and then forward. Each press of the DIRECTION

button or interruption in track power causes the locomotive to advance to the next

operational state.

Adjust track voltage until your locomotive moves at your desired speed.

Co ect the drawbar betwee the locomotive a d te der.

See Figure 6.

If the smoke unit switch is in the ON position, add smoke fluid to your

locomotive’s stack to prevent damage to the smoke unit. Refer to

page 12 for additional information.

Caution!

ote!

Figure 6. Drawbar connection

Refer to Figure 7 on page 11 for the location of the Transformer features listed in this section.

THROTTLE

Push the throttle forward to increase track power. The markings on the throttle approxi-

mate the percentage of full power. For more realism, push the throttle slowly to gradually

increase or decrease the speed of the locomotive. Slowing or stopping the locomotive with the

throttle instead of the DIRECTION button will allow you to continue in the same direction

when you increase the throttle again. To achieve this effect, reduce the throttle to the point

that the locomotive stops moving, but don’t completely turn off the throttle. That way, your

train won’t sequence into neutral.

POWER-ON INDICATOR

The green light will remain on during normal operation. The green light will begin to

flash if you exceed the power limit of the Transformer. The unit will allow you to momentarily

exceed the power limit, but power will be gradually reduced until the problem is corrected.

The benefit is that the Transformer will not instantly turn off.

DIRECTION

The DIRECTION control button interrupts track power to activate the reverse unit in your

locomotive. Your locomotive will not respond to this button when the reverse unit switch is in

the OFF position.

WHISTLE

The WHISTLE button will activate your locomotive’s whistle or horn. The sound will con-

tinue until the button is released. No external sound activation buttons are needed.

BELL

The BELL button will activate the bell sounds on locomotives equipped with this feature. Press

and hold the BELL button for two to three seconds to begin the sounds; press and hold the button

again to turn off the ringing.

Do not activate horns, whistles, or bells on RailSounds-equipped locomotives until

track power has been turned on for a few moments, or a continuous horn/whistle or

bell sound may occur. To correct this problem, simply turn off the CW-80

Transformer, then turn it back on.

Ru i g your trai

Experiencing the features of the CW-80 Transformer

ote!

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Juguete de Lionel

Lionel

Lionel GP30 Manual de usuario

Lionel

Lionel F3 A-B-A Diesel Manual de usuario

Lionel

Lionel K-LINE EP-5 Manual de usuario

Lionel

Lionel Wild West Set Manual de usuario

Lionel

Lionel Union Pacific Manual de usuario

Lionel

Lionel GP-20 Manual de usuario

Lionel

Lionel Christmas Toy Store Manual de usuario

Lionel

Lionel Railroad Tugboat Manual de usuario

Lionel

Lionel GP-7 diesel locomotive Manual de usuario

Lionel

Lionel FasTrack 78-2110-250 Manual de usuario

Lionel

Lionel Norman Rockwell Christmas Manual de usuario

Lionel

Lionel AMERICAN FLYER EP-5 Manual de usuario

Lionel

Lionel LL Bean Ready-To-Run O-27 Set Manual de usuario

Lionel

Lionel The Polar Express Manual de usuario

Lionel

Lionel Union Pacific Gold Coast 0-8-0 Manual de usuario

Lionel

Lionel 6-82629 Manual de usuario

Lionel

Lionel SD70M-2 Manual de usuario

Lionel

Lionel Gang Car Manual de usuario

Lionel

Lionel American Flyer Manual de usuario

Lionel

Lionel American Flyer U-Boat Manual de usuario

Lionel

Lionel Union Pacific ALCo PA Manual de usuario

Lionel

Lionel North Pole Express Manual de usuario

Lionel

Lionel 3102 Manual de usuario

Lionel

Lionel 71-3008-250 Manual de usuario

Manuales populares de Juguete de otras marcas

marklin

marklin 37321 Manual de usuario

Canon

Canon PAPER CRAFT Manual de usuario

GREAT PLANES

GREAT PLANES Pitts M-12S Manual de usuario

NOCH

NOCH 14261 Manual de usuario

Hausler

Hausler 450 SE V2 Manual de usuario

Dynaflite

Dynaflite Daydream Manual de usuario

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manual

Kenner

Kenner Batman 63651 Manual de usuario

LEGO

LEGO 8527 Manual de usuario

iKarus

iKarus ECO 8 Manual de usuario

Multiplex

Multiplex EasyStar II Manual de instrucciones

Walkera

Walkera 38 Manual de instrucciones

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manual de usuario

MD MXION SWD Manual de usuario

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manual de usuario

marklin

marklin 39671 Manual de usuario

Meccano

Meccano 15103 Manual de usuario

LEGO

LEGO TECHNIC 8735 Manual de usuario