Linksys USBBT100 Manual de usuario
A Division of Cisco Systems, Inc.
®
Model No.
Wireless
1
Quick Installation Guide
USBBT100 (EU/UK/LA)
USB Adapter
Bluetooth
Package Contents
• Bluetooth USB Adapter
• USB Extension Cable
• Setup CD-ROM with User Guide
• Quick Installation
2
1
Before connecting the Adapter to
your PC’s USB port, you must install
the Bluetooth Software, which will
install everything your system needs
to use the Adapter. Once this Setup
Wizard is installed, you will be able to
connect the Adapter to your PC.
AInsert the Adapter’s Setup Wiz-
ard CD into your PC’s CD-ROM.
It should start up automatically.
If it does not, click Start and
choose Run. In the field that
appears, enter D:\setup.exe (if
“D” is the letter of your CD-ROM
drive). Once the CD starts, the
Wizard’s Welcome screen
should appear.
Click the Install button to install
the Bluetooth Software. Click-
ing the User Guide button will
open up the User Guide’s pdf
file.
BAfter clicking the Install button,
the InstallShield Wizard’s Wel-
come screen will appear. Click
the Next button to continue.
A
IMPORTANT: You must install the Blue-
tooth Software from the CD included
with the Adapter before connecting the
Adapter to your PC.
Installing The Bluetooth Software
B
3
C
CThe next screen is the License
Agreement screen. Read the
License Agreement and click
the radio button for I accept
the terms in the license agree-
ment. Then, click the Next but-
ton. You may not click the Next
button unless you click the but-
ton showing that you accept
the terms.
DYou will next be asked for a
Destination folder. This is where
the Bluetooth Software will be
installed. A default directory will
be displayed but, if you wish to
change that, you can click the
Change button and select a
different folder. Then, click the
Next button.
D
4
E
ENow, the Bluetooth Software
will be ready to begin installing
all of the necessary files. Click
the Install button to begin.
The files will then install.
FDuring installation, you may
see a Driver Signature Notice.
This product has been tested
for use with Windows. Click the
OK button to continue.
F
5
GAt this point, you should con-
nect the Adapter to your PC’s
USB port. (See the description in
the next step for details.) After
connecting it, click the OK but-
ton.
HThe Wizard, along with all you
need to install the Adapter, has
been successfully installed.
Click the Finish button to close
the final window.
G
H
NOTE: Restart your PC if requested by
Windows.
6
B
AAfter a moment, a Bluetooth
icon will appear in your system
tray.
BTo connect the Adapter to your
PC, simply plug it into any
unused USB port.
Congratulations! The installa-
tion of the Adapter is com-
plete.
Connecting the Adapter
2
NOTE: Before you can start using the
Adapter, you must run the Bluetooth Setup
Wizard by right-clicking the Bluetooth icon
and selecting the Wizard, described in
Step 3. For more advanced setup options,
please refer to the User Guide (English
Only).
A
7
3
Before you can begin using the Adapter, you must run the Bluetooth
Setup Wizard. Right-click the Bluetooth System Tray Icon and select
Bluetooth Setup Wizard from the menu that appears. This will open
the Bluetooth Setup Wizard.
The Wizard gives you four choices:
I know the service I want to use and I want to find a Bluetooth device
that provides that service.
Bluetooth devices provide many services. Select this option when you
wish to find a device for a specific service.
I want to find a specific Bluetooth device and configure how this
computer will use its services.
Already know the device you wish to select? Chose this option when
you wish to find a service for a specific device. This option is recom-
mended for users who are not familiar with Bluetooth devices.
I want to configure the Bluetooth services that this computer will pro-
vide to remote devices.
As the Adapter communicates with other Bluetooth devices, so are
they communicating with the Adapter. Select this option to configure
the services the Adapter provides for other devices.
For information on Applications and Services, see Appendix B: Blue-
tooth Applications and Services.
I want to change the name and/or device type that this computer
displays to other Bluetooth devices.
Personalize how the Adapter appears to other Bluetooth devices.
From this screen (not shown), you can click Next to proceed with the
Wizard or Cancel to exit the Wizard.
Use the Wizard to configure those options you must. Not all options
must be configured. These options are provided in detail on the fol-
lowing pages.
Using The Bluetooth Setup Wizard
8
I know the service I want to use and I want
to find a Bluetooth device that provides
that service.
After you select this option from the Wizard’s
menu and click
Next
, the
Bluetooth Service
Selection
screen will appear. Select the ser-
vice that you need and click
Next
.
Next, the
Bluetooth Device Selection
screen
will appear. This screen will list those devices
that provide the service you’ve requested.
Chose the device to which you wish to con-
nect and click
Next
to continue.
The
Setup Wizard Completion Screen
will
appear next. The name of the service will
appear at the top of the screen and you
can personalize this if you wish. If you wish
to further configure the service you’ve
selected, click
Configure
. In most cases,
further configuration is not required. To start
the connection upon completing the Wiz-
ard, select
Start the Connection
. A shortcut
to this device will be placed in the
My Blue-
tooth Places
folder. To create more short-
cuts in addition to the one created by
default and restart the Wizard, select
Cre-
ate a shortcut and then restart this wizard so
that I can create additional shortcuts
. Click
Back
if you with to go back a step,
Cancel
if you wish to leave the Wizard without sav-
ing your changes, or
Finish
to complete the
Wizard.
The Adapter will then try to connect to
that device. If a PIN code is required
for security, you will be notified. At this
point, you will be asked for your PIN
code as well as the PIN code for the
other Bluetooth device before the con-
nection can be completed.
The Bluetooth Service
Selection Screen
The Bluetooth Device
Selection Screen
The Setup Wizard
Completion Screen
NOTE: For descriptions of services
provided by Bluetooth devices, see
that device’s documentation.
9
I want to find a specific Bluetooth
device and configure how this com-
puter will use its services.
After you select this option from the
Wizard’s menu and click the Next but-
ton, the Bluetooth Device Selection
screen will appear. This screen will list
those devices that provide the service
you’ve requested. Chose the device
to which you wish to connect and click
Next to continue.
The Bluetooth Security Setup screen will
appear next. Select the pairing options
for that device, including the PIN code
if required, and click Next. If the PIN
code is required, you will be asked for
your PIN code as well as the PIN code
for the other Bluetooth device before
the connection can be completed.
Last, the Bluetooth Service Selection
screen will appear. Select the service
you wish to use for the device you
selected. If you wish to further config-
ure the service you’ve selected, click
Configure. In most cases, further con-
figuration is not required. Click Back if
you with to go back a step, Cancel if
you wish to leave the Wizard without
saving your changes, or Finish to com-
plete the Wizard.
The Bluetooth Device
Selection Screen
The Bluetooth Security
Setup Screen
The Bluetooth Service
Selection Screen
10
I want to configure the Bluetooth ser-
vices that this computer will provide to
remote devices.
What services do you wish the Adapter
to provide to your other Bluetooth
devices? Select these from the screen
that appears, the Bluetooth Service
Selection screen. If you wish to further
configure the service you’ve selected,
click Configure. In most cases, further
configuration is not required. Click
Back if you with to go back a step,
Cancel if you wish to leave the Wizard
without saving your changes, or Finish
to complete the Wizard.
I want to change the name and/or
device type that this computer dis-
plays to other Bluetooth devices.
If you wish to personalize the Computer
name as shown on other Bluetooth
devices or change the type of com-
puter, select this option. Type in a new
Computer name and select the type
of computer on which the Adapter is
connected. Then, click Back if you with
to go back a step, Cancel if you wish
to leave the Wizard without saving your
changes, or Finish to complete the Wiz-
ard.
The Bluetooth Service
Selection Screen
Changing Computer
Name and Type
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2005
Cisco Systems, Inc. All rights reserved.
usbbt100-qig-50618 KL
For additional information or troubleshooting help, refer
to the User Guide on the Setup CD-ROM. You can also
email for further support.
Website
http://www.linksys.com/international
Product Registration
http://www.linksys.com/registration
Otros manuales para USBBT100
3
Tabla de contenidos
Idiomas:
Otros manuales de Adaptador de Linksys
Linksys
Linksys HU200 Manual de usuario
Linksys
Linksys WUSB6300 V2 Manual del propietario
Linksys
Linksys WUSB6300 Manual de usuario
Linksys
Linksys WGA600N - Wireless-N Gaming Adapter Bridge Manual de usuario
Linksys
Linksys Wireless-G Manual de usuario
Linksys
Linksys Wireless-G Manual de usuario
Linksys
Linksys USBBT100 Instrucciones de funcionamiento originales
Linksys
Linksys WUSB11 ver. 2.6 Instrucciones de funcionamiento originales
Linksys
Linksys WGA54G Manual de usuario
Linksys
Linksys Instant PowerLine PLUSB10 Instrucciones de funcionamiento originales
Linksys
Linksys USB1000 Manual de usuario
Linksys
Linksys PAP2-VU Guía
Linksys
Linksys USB100M Manual de usuario
Linksys
Linksys USB10T Manual de usuario
Linksys
Linksys WPC54GX4 Manual de operación
Linksys
Linksys WGA54G Manual de usuario
Linksys
Linksys Linksys SPA9000 Manual de operación
Linksys
Linksys WAPPOE12 Manual de usuario
Linksys
Linksys WGA54G Manual de usuario
Linksys
Linksys WPC11 Manual de usuario
