Linksys PLTE200 Manual de usuario

USER GUIDE

Powerline Network Adapter,

Powerline 4-Port Network Adapter,

Powerline Network Kit

Model: PLTE200, PLTS200, PLTK300

About This Guide

Powerline Network Adapter

About This Guide

Icon Descriptions

While reading through the User Guide you may see

various icons that call attention to specific items. Below is

a description of these icons:

NOTE: This check mark indicates that there is

a note of interest and is something that you

should pay special attention to while using the

product.

WARNING: This exclamation point indicates

that there is a caution or warning and it is

something that could damage your property or

product.

WEB: This globe icon indicates a noteworthy

website address or e-mail address.

Online Resources

Website addresses in this document are listed without

http:// in front of the address because most current web

browsers do not require it. If you use an older web browser,

you may have to add http:// in front of the web address.

Resource Website

Linksys www.linksys.com

Linksys International www.linksys.com/international

Glossary www.linksys.com/glossary

Network Security www.linksys.com/security

Linksys, Cisco and the Cisco Logo are

registered trademarks or trademarks

of Cisco Systems, Inc. and/or its

affiliates in the U.S. and certain other

Other brands and product names are

trademarks or registered trademarks

of their respective holders.

Table of Contents

Powerline Network Adapter

Chapter 1: Introduction to Powerline Networking 1

How Powerline Networking Works. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

How to Share Internet Access over the Powerline Network . . . . . . . . . . . . . . . . . . . 1

A Powerline Network in a Two-Story House . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Chapter 2: Product Overview 3

Front Panel of the Powerline Network Adapter (model number: PLTE200). . . . . . . . . . 3

Ports Panel of the Powerline Network Adapter (model number: PLTE200). . . . . . . . . . 3

Front Panel of the Powerline 4-Port Network Adapter (model number: PLTS200) . . . . . 3

Ports Panel of the Powerline 4-Port Network Adapter (model number: PLTS200) . . . . . 4

Placement Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Chapter 3: Advanced Conguration 6

Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

How to Install the Powerline Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

How to Access the Powerline Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Main. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

About . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Appendix A: Troubleshooting 10

Appendix B: Specications 11

Appendix C: Warranty Information 12

Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Appendix D: Regulatory Information 14

FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Safety Notices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste

Electric and Electronic Equipment (WEEE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Appendix E: Software License Agreement 19

Software in Linksys Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Software Licenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Chapter 1 Introduction to Powerline Networking

Powerline Network Adapter

Chapter 1: Introduction to

Powerline Networking

How Powerline Networking Works

Powerlines run through your home or office, carrying

electrical power to electrical outlets in every room.

The typical wired Ethernet network uses Ethernet network

cables to connect your wired network devices. A powerline

network uses your existing powerlines as the wiring for

your powerline network.

To create your powerline network, use Powerline

Adapters. Each device on your powerline network requires

connection to a Powerline Adapter.

The Powerline Network Adapter (model number: PLTE200)

features one Ethernet port and connects to the following:

an electrical outlet•

a computer or other Ethernet network device (using•

an Ethernet cable)

The Powerline 4-Port Network Adapter (model number:

PLTS200) features four Ethernet ports and connects to the

following:

an electrical outlet•

up to four computers or other Ethernet network•

devices (using Ethernet cables)

How to Share Internet Access over the

Powerline Network

To share Internet access over the powerline network,

add your router to the powerline network. Connect a

Powerline Adapter to one of the local Ethernet network

ports on your router. Then connect the Powerline Adapter

to an electrical outlet.

The diagram below shows the connections of a basic

powerlinenetwork.Theconnectionsbetweenthe Internet,

modem, and router stay the same.

Using an Ethernet network cable, the router is connected

to its Powerline Adapter, which is plugged into an electrical

outlet.

Using Ethernet network cables, the gaming console and

computerareconnected totheirPowerline4-PortNetwork

Adapter, which is plugged into an electrical outlet.

Connection Diagram of a Basic Powerline Network

Internet

Modem

Router

Powerline

Network Adapter

Powerline 4-Port

Network Adapter

Gaming Console

Computer

Powerline

Chapter 1 Introduction to Powerline Networking

Powerline Network Adapter

A Powerline Network in a Two-Story House

This diagram shows a basic powerline network in a

two-story house. The router upstairs is connected to its

Powerline Adapter, which is plugged into an electrical

outlet. Downstairs, the gaming console and a computer

share their Powerline 4-Port Network Adapter, which is

plugged into an electrical outlet.

Using the powerlines of the home, the router expands

your local network to include the gaming console and

desktop computer in the living room. Internet access and

files can be shared between your computers and other

networked devices.

For online gaming, you can play downstairs in the comfort

of your living room, while taking advantage of your router

and high-speed Internet connection upstairs.

Diagram of a Powerline Network in a Two-Story House

Internet

Modem Router

Computer

Gaming

Console

Powerline

Network Adapter

Powerline 4-Port

Network Adapter

Chapter 2 Product Overview

Powerline Network Adapter

Chapter 2:

Product Overview

Thank you for choosing the Linksys by Cisco powerline

products: Powerline Network Adapter (model number:

PLTE200), Powerline 4-Port Network Adapter (model

number: PLTS200), or Powerline Network Kit (model

number: PLTK300).

The Powerline Network Adapter features one Ethernet

port to connect a router, computer, or other network

device to your powerline network, while the Powerline

4-Port Network Adapter features four Ethernet ports to

connect up to four computers or other network devices to

your powerline network.

The Kit features one Powerline Network Adapter and one

Powerline 4-Port Network Adapter to create a powerline

network. Connect the Powerline Network Adapter to your

network router, and connect the Powerline 4-Port Network

Adapter to computers or other network devices.

For more information about powerline networking, refer

to“Chapter 1: Introduction to Powerline Networking”.

Front Panel of the Powerline Network

Adapter (model number: PLTE200)

Power (Blue) The power LED lights up when

the Powerline Adapter is powered on.

Ethernet (Blue) The Ethernet LED lights up

when the Powerline Adapter is connected to a

network device through the Ethernet port. The

LED flashes to indicate network activity over

that port.

Powerline (Blue) The Powerline LED lights up

when the Powerline Adapter is connected to

the powerline network through the Power port.

The LED flashes to indicate network activity over

that port.

Ports Panel of the Powerline Network

Adapter (model number: PLTE200)

Ethernet The Ethernet port connects to an

Ethernet network device, such as a router or

computer.

Power The Power port connects to the

powerline end of the power cord.

Front Panel of the Powerline 4-Port

Network Adapter (model number:

PLTS200)

Power (Blue) The power LED lights up when

the Powerline Adapter is powered on.

Ethernet (Blue) These numbered LEDs

correspond with the numbered Ethernet ports

on the back panel. A LED lights up when its

corresponding port is connected to a network

device. It flashes to indicate network activity

over that port.

Powerline (Blue) The Powerline LED lights up

when the Powerline Adapter is connected to

the powerline network through the Power port.

The LED flashes to indicate network activity over

that port.

Chapter 2 Product Overview

Powerline Network Adapter

Ports Panel of the Powerline 4-Port

Network Adapter (model number:

PLTS200)

Ethernet 1-4 These Ethernet ports (1, 2, 3,

4) connect to computers or other network

devices.

Power The Power port connects to the

powerline end of the power cord.

Placement Options

There are three ways to place the Powerline Adapter. The

first way is horizontal placement on a surface. The second

way is vertical placement on a stand. The third way is wall-

mounting.

Horizontal Placement

Place the Powerline Adapter on a level surface near an

electrical outlet.

Vertical Placement

The stand fits only on the side panel adjacent to the Power

port. Insert the stand into the side panel, and then place

the Powerline Adapter on a level surface near an electrical

outlet.

NOTE: When the Powerline Adapter is on the

stand, the Power port is closest to the stand.

Wall-Mounting Placement

ThePowerlineAdapterhasfourwall-mountslotsonitsback

panel. The distance between two adjacent slots is 60 mm

(2.36 inches).

Two screws are needed to mount the Powerline Adapter.

Suggested Mounting Hardware

2-2.5 mm

4 mm 1-1.5 mm

Note: Mounting hardware illustrations are not†

true to scale.

NOTE: Linksys is not responsible for damages

incurred by insecure wall-mounting hardware.

Follow these instructions:

Determine where you want to mount the Powerline1.

Adapter. Make sure that the wall you use is smooth,

flat, dry, and sturdy. Also make sure the location is

within reach of an electrical outlet.

Drill two holes into the wall. Make sure the holes are2.

60 mm (2.36 inches) apart.

Chapter 2 Product Overview

Powerline Network Adapter

Insert a screw into each hole and leave 3 mm3.

(0.12 inches) of its head exposed.

Maneuver the Powerline Adapter so the two wall-4.

mount slots line up with the two screws.

Place the wall-mount slots over the screws and slide5.

the Powerline Adapter down until the screws fit snugly

into the wall-mount slots.

60 mm

Wall Mounting Template

Print this page at 100% size, and cut along the dotted line.

Check the template’s accuracy by measuring the distance

between the wall-mount slots with a ruler. This distance

should be 60 mm. Then place the template on the wall to

drill precise spacing.

Chapter 3 Advanced Configuration

Powerline Network Adapter

Chapter 3:

Advanced Configuration

Overview

Use the Powerline Utility to configure advanced security

for your powerline network.

How to Install the Powerline Utility

Insert the included CD-ROM into the CD-ROM drive of1.

your computer.

Go to2. Start > Run.

In the3. Open field, enter D:\setup.exe (if“D”is the letter

of your CD drive). Then click OK.

The4. Welcome screen appears. Click Next.

Welcome Screen

To accept the License Agreement, click5. Yes.

License Agreement

To install the Powerline Utility in the6.

default folder, click Next.

To select a different folder, click Browse, and select the

new location. Then click Next.

Choose Destination Location

When the installation is complete, click7. Finish.

InstallShield Wizard Complete

How to Access the Powerline Utility

After installation, the icon for the Powerline Utility appears

on your desktop.

Powerline Utility Icon

Double-click the icon to open the Powerline Utility.

Chapter 3 Advanced Configuration

Powerline Network Adapter

You can also go to Start > Programs > Linksys >

Powerline Utility.

Start > Programs > Linksys > Powerline Utility

When the Powerline Utility opens, the Main screen

appears.

Main Screen

You have four screens available:

Main Detect, rename, add or access Powerline Adapters.

Security Set a Network Password to configure advanced

security for your powerline network. (The Network

Password is a key used to encrypt communications

between the Powerline Adapters.)

Diagnostics View information about the Powerline

Adapters.

About View information about the Powerline Utility.

Click Close to exit the Powerline Utility.

Main

Use this screen to detect, rename, add, or access remote

Powerline Adapters.

Local

The Powerline Adapter connected directly to your

computer is listed with its Device Type and MAC Address.

Refresh Click this option to update the status information

of the local Powerline Adapter.

Remote

The remote Powerline Adapters are listed with the

following information: Device Name, (Device) Password,

Quality (of connection), Rate (Mbps), and MAC Address.

The Password column lists the Device Passwords you have

entered for the remote Powerline Adapters using the Enter

Password option.

NOTE: Each Powerline Adapter is assigned a

unique key called a Device Password, which

allows you remote access through the Powerline

Utility. If you enter the Device Password of a

remote Powerline Adapter, then you can change

its Network Password using the Security screen.

Rename To assign a new name to a remote Powerline

Adapter, select it, and then click Rename. Enter the new

name, and then press Enter.

Rename

Enter Password To change the Network Password of a

remote Powerline Adapter, you must first enter its Device

Password. Select the Powerline Adapter, and then click

Enter Password.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Adaptador de Linksys

Linksys

Linksys USB1000 Instrucciones de funcionamiento originales

Linksys

Linksys WUSB200 Manual de usuario

Linksys

Linksys WPC100 - Rangeplus Wireless G Pc Card Manual de usuario

Linksys

Linksys WUSB6100M Manual de usuario

Linksys

Linksys SPA2002 Manual de operación

Linksys

Linksys WUSB12 Instrucciones de funcionamiento originales

Linksys

Linksys WMA11B - Wireless-B Media Adapter Instrucciones de funcionamiento originales

Linksys

Linksys WPC55AG Manual de usuario

Linksys

Linksys PCM1000 - Cisco 10/100/1000 CARDBUS MOBILE... Manual de operación

Linksys

Linksys PCMLM56 - EtherFast - 56 Kbps Network Manual de usuario

Linksys

Linksys WUSB54GS EU Manual de usuario

Linksys

Linksys WPC600N - Ultra RangePlus Wireless-N PC Card Manual de usuario

Linksys

Linksys PAP2 Manual de usuario

Linksys

Linksys PAP2 Manual de usuario

Linksys

Linksys AE1000 Manual de usuario

Linksys

Linksys WUSB54GP Manual de usuario

Linksys

Linksys SPA 2102 ATA Manual de usuario

Linksys

Linksys PAP2 Manual de usuario

Linksys

Linksys WUSB54GC EU Manual de usuario

Linksys

Linksys Small Business SPA2102 Manual de usuario

Linksys

Linksys WUSB11 ver. 2.6 Manual de usuario

Linksys

Linksys PAP2T-NA Manual de servicio

Linksys

Linksys WUSB11 ver. 2.6 Manual de usuario

Linksys

Linksys SPA1 Series Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario