Linksys PAP2T-NA Manual de usuario

Linksys



PAP2TNA







Setup 

User Guide



Version1.0



Updated

5/2/2008



Page 2of 4

Overview

This guide provides an overview of setting up the Linksys PAP2T-NA device.

General Support

If you have questions or need technical assistance with Evolution PBX call (888)

587-5750 or send an Email to [email protected].

If you have questions about third party hardware or software please visit the following

Websites:

•Snap: http://www.snapanumber.com.

•iView: http://www.i9technologies.com/.

•Cisco VoIP Telephones: http://www.cisco.com.

•CounterPath Software Telephones - http://www.counterpath.com.

•Digium PCI Cards: http://www.digium.com.

•Linksys Analog Terminal Adapters and VoIP telephones: http://www.linksys.com.

•Polycom VoIP Telephones: http://www.polycom.com.

My Evolution PBX Doesn’t Do That!

Some features and configuration options in this document may only be available with a

recent software upgrade available from Intuitive Voice Technology. Email

[email protected] to learn more about Evolution PBX upgrades (please explain

the feature that you are interested in).

Errata

Please report errors or confusing descriptions by sending an Email to

[email protected].

Page 3of 4

SettingUptheLinksysPAP2TNA

The Linksys PAP2T-NA is a SIP analog terminal adapter. It has one RJ45 Ethernet

interface to connect to your data network and two RJ11 FXS interfaces to connect to

analog devices such as analog telephones or fax machines. Each analog port on the

PAP2T-NA must be configured as an individual extension in Evolution PBX.

ConfiguringthePAP2TNAinEvolutionPBX

To Configure a Basic Extension for the PAP2T-NA in Evolution PBX

1. Login to Evolution PBX, click the Resources tab then click Phone Extensions.

2. In the New Device field, select VoIP--GENERIC SIP and the Modify Phones

window displays.

3. In the Extension field, select an available extension.

4. In the Caller ID Name field, enter the name you want to be passed as this

extension’s caller ID text.

5. In the Caller ID Number field, enter the number you want to be passed as this

extension’s caller ID number.

6. In the Time Zone field, select the appropriate time zone for the time zone where

the phone will be located.

7. In the Remote Phone field, select Yes if the phone will not be on the same

subnet as the Evolution PBX server (for example, if the phone belongs to a user

that is located at a remote location). Select No if this is not the case.

Note: The other options on the Modify Phones frame are optional or advanced.

8. Click Save.

Note: The Evolution PBX Web configuration interface requires that your browser’s popup

blocker be turned off or disabled so that the Device Settings screen can be seen.

9. Write down the device settings for your new extension that are displayed on the

screen. These settings will be used to configure your phone.



Page 4of 4

ConfiguringtheLinksysPAP2TNAAdaptor

To Configure the Linksys PAP2T-NA Adaptor

1. Connect the Linksys PPAP2T-NA to your Ethernet network then connect an

analog telephone to one of the ports labeled PHONE 1 or PHONE 2.

2. Dial **** on your analog phone, enter 110# and the IP Address the Linksys

PAP2T-NA adaptor acquired from your network is given.

3. Write down the IP Address, open a Web Browser then enter the IP Address (for

example, http://192.168.2.71) into the Address bar.

4. Press Enter and the Info tab of the Linksys Telephone Configuration window displays.

5. Click Admin Login, click switch to advanced view then click Line 1 to configure

the SIP settings.

6. In the Line Enable field, select yes.

7. In the SIP Port field, enter 5060.

8. In the Proxy field enter Evolution PBX’s IP Address (for example, 192.168.165.100).

9. In the Register field, select yes.

10.In the User ID field, enter the extension number (for example, 1020)

11.In the Password field, enter the password provided by Evolution PBX you wrote

down when you created your default extension.

12.In the Use Auth ID field, select No.

13.Click Save Settings and the telephone will save, reboot, and automatically

Otros manuales para PAP2T-NA

Tabla de contenidos

Otros manuales de Adaptador de Linksys

Linksys

Linksys WUSB54GS EU Manual de operación

Linksys

Linksys SPA3102 Manual de usuario

Linksys

Linksys WPC54GS - Refurb Wrls-g Notebook Adr Spdbstr No... Manual de usuario

Linksys

Linksys WPC54GX Manual de operación

Linksys

Linksys WUSB300N Instrucciones de funcionamiento originales

Linksys

Linksys PAP2 Manual de usuario

Linksys

Linksys LINKSYS WMP300N Manual de usuario

Linksys

Linksys WPC54G EU Instrucciones de funcionamiento originales

Linksys

Linksys WUSB11 ver. 2.6 Manual de usuario

Linksys

Linksys Wireless-G Manual de usuario

Linksys

Linksys PLE200 - PowerLine AV EN Adapter Bridge Manual de usuario

Linksys

Linksys PCMLM56 - EtherFast - 56 Kbps Network Manual de usuario

Linksys

Linksys WUSB54GC EU Manual de operación

Linksys

Linksys WPC51AB Manual de usuario

Linksys

Linksys WPC51AB Manual de usuario

Linksys

Linksys WUSB54GC EU Manual de usuario

Linksys

Linksys WPC54GX4 Manual de usuario

Linksys

Linksys PLE200 - PowerLine AV EN Adapter Bridge Manual de usuario

Linksys

Linksys Instant PowerLine PLUSB10 Instrucciones de funcionamiento originales

Linksys

Linksys WGA11B Manual de operación

Linksys

Linksys WPC200 Manual de usuario

Linksys

Linksys USBBT100 Manual de usuario

Linksys

Linksys WUSB54GS EU Manual de usuario

Linksys

Linksys USB100M Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario