Linksys HU200 Manual de usuario

Quick Installation

Wireless

Model No.

HU200

USB Adaptor

Home Wireless-G

AInsert the Setup Wizard CD-

ROM into your CD-ROM drive.

The Setup Wizard should run

automatically, and the

Welcome screen should

appear. If it does not, click the

Start button and choose Run.

In the field that appears, enter

D:\setup.exe (if “D” is the letter

of your CD-ROM drive).

BTo install the Adaptor, click the

Install button on the Welcome

screen.

CAfter reading the License

Agreement, click Next.

DChoose a wireless network

mode. Click the Infrastructure

Mode radio button if you want

to connect to a wireless router

or access point. Click the Ad-

Hoc Mode radio button if you

want to connect directly to

another wireless device without

using a wireless router or

access point.

In the SSID field, enter the SSID

or name for your wireless

network. The SSID must be

identical for all devices in the

network. Click Next.

EIf you chose Infrastructure

Mode, go to Step F now.

If you chose Ad-Hoc Mode,

select the channel that your

network uses. For the Network

Mode, select Mixed Mode to

allow both Wireless-G and

Wireless-B computers on the

network, or select G-Only

Mode to allow only Wireless-G

computers. Then click Next.

FIf your network doesn’t use any

security method, select

Disabled and click Next.

Proceed to Step H.

Select the security method you

want to use: WEP or PSK. (WEP

stands for Wired Equivalent

Privacy, and PSK stands for Pre-

Shared Key.) Then click Next

and proceed to Step G.

Set up the Home Wireless-G USB

Adaptor

Package Contents

• Home Wireless-G USB Adaptor

• USB Cable

• Setup CD-ROM with User Guide

• Quick Installation

GHz

802.11g

NOTE: If your network is using WPA-

Personal or WPA-PSK security, then

select PSK.

HThe Setup Wizard will ask you to

review your settings before it

starts to copy files. Click Next to

save these settings, or click

Back to change any settings.

IAfter the software has been

successfully installed, the

Congratulations screen will

appear. Click Exit.

GProceed to the appropriate

instructions for your security

method.

1WEP

aSelect 64-bit or 128-bit from

the drop-down menu.

bEnter your Passphrase in the

Passphrase field, and the WEP

key will be automatically

generated.

To manually enter the WEP key,

leave the Passphrase field

blank and enter the WEP key in

the WEP Key field.

cClick Next, and go to Step H.

2PSK

aSelect the encryption method

you want to use, TKIP or AES,

from the drop-down menu.

bEnter your Passphrase or Pre-

Shared Key in the Passphrase

field.

cThen click Next and proceed

to Step H.

AConnect one end of the

included USB cable to the USB

port of the Adaptor.

BConnect the other end to a

USB port on your PC. When the

Adaptor is plugged in, the

Power LED should light up.

CRaise the antenna. It should

point straight up into the air, at

a 90º angle from the Adaptor.

DAfter the Adaptor is installed,

the Wireless Network Monitor

icon will appear in the system

tray at the bottom right-hand

corner of your screen.

Congratulations! The installation of

the Home Wireless-G USB Adaptor is

complete.

HU200-UK-QI-50309A JL

Linksys is a registered trademark or trademark of

Cisco Systems, Inc. and/or its affiliates in the U.S.

Connect the Home Wireless-G USB

Adaptor

For additional information or troubleshooting

help, refer to the User Guide on the CD-ROM

or the Technical Support Insert. You can also

e-mail for further support.

Website

http://www.linksys.com/international

Registration

http://www.linksys.com/registration

NOTE: Double-click the icon if you want

to check the link information, search for

available wireless networks, or make

additional configuration changes.

WEP

PSK

Otros manuales para HU200

Otros manuales de Adaptador de Linksys

Linksys

Linksys USBBT100 Manual de usuario

Linksys

Linksys PAP2 Manual de usuario

Linksys

Linksys WUSB54GC EU Manual de usuario

Linksys

Linksys WUSB54AG Manual de operación

Linksys

Linksys PAP2-T Instrucciones de funcionamiento originales

Linksys

Linksys WUSB54G Manual de usuario

Linksys

Linksys WGA11B Instrucciones de funcionamiento originales

Linksys

Linksys WPC200 Instrucciones de funcionamiento originales

Linksys

Linksys Linksys SPA9000 Manual de usuario

Linksys

Linksys WPC55AG Manual de usuario

Linksys

Linksys PAP2 Manual de usuario

Linksys

Linksys EC1000 Manual de usuario

Linksys

Linksys WPC54GX4 Manual de operación

Linksys

Linksys PAP2-VU Guía

Linksys

Linksys USBVPN1 Manual de usuario

Linksys

Linksys WPC4400N Manual de operación

Linksys

Linksys WUSB200 Manual de usuario

Linksys

Linksys WUSB11 ver. 2.6 Manual de usuario

Linksys

Linksys WPC55AG Manual de usuario

Linksys

Linksys Small Business SPA2102 Instrucciones de funcionamiento originales

Linksys

Linksys WUSB12 Manual de usuario

Linksys

Linksys Instant Broadband Series Manual de usuario

Linksys

Linksys WUSB54GSC Manual de usuario

Linksys

Linksys PLTE200 Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario