8
Command SMS – SMS with other content are refused
Command ( SMS) Function response
ADMINx,+420cc...c Save or rewrite ADMINx
number 'OK,credit'
ADMINx, Erase ADMINx number 'OK,credit'
ALARMx,+420cc...c Save or rewrite ALARMx
number 'OK,credit'
ALARMx, Erase ALARMx number 'OK,credit'
CRED,x..xx Save or rewrite CRED number 'OK,credit'
CRED, Erase CRED number 'OK,credit'
OPER,x..xx Save or rewrite OPER number 'OK,credit'
OPER, Erase OPER number 'OK,credit'
RTIME,ss Time closing of output A during
ringing
(ss=01..99 sec)
'OK,credit'
NAME,+420cc....c Save phone number for NAME 'OK,credit'
NAME, Erase all numbers with NAME 'OK,credit'
NAME,+420cc....c-
DEL Erase exact number with NAME
(may exist more times !) 'OK,credit'
CAL,AT+CSQ Valuation of GSM signal
strenght '+CSQ,17,99,
credit'
(max 32)
SMS is possible send from ADMIN numbers only!
CAL,AT+CPBR=x Detection of number saved on
position x '+CPBR:1,”+42
1012345678”,
145,”ADMIN1”
STAT Status inquiry 'status,verze,i
mei,credit' )*
REL1,ON Activate relay 1 (Output A) 'OK(REL1,ON)
,credit'
REL1,OF Deactivate relay 2 (Output A) 'OK(REL1,OF),
credit'
REL1,ON,mm Activate relay 1 (Output A) for
time mm, where mm=01..99
min
'OK(REL1,ON,
mm),credit'
REL2,ON Activate relay 2 (Output B) 'OK(REL1,ON)
,credit'
REL2,OF Deactivate relay 2 (Output B) 'OK(REL1,OF),
credit'
Valid for ALARM numbers
REL2,ON,mm Activate relay 2 (Output B) for
time mm, where mm=01..99
min
'OK(REL1,ON,
mm),credit'
