Link Technologies PowerLink AT2 Manual de usuario

www.LinkTechs.net

PowerLink AT2 Manual v1.2

314.735.0270

647.725.7011

636.660.1534

[email protected]

314.735.0270

647.725.7011

636.660.1534

[email protected]

8839 Oermann Road

Dittmer, MO 63023

Link Technologies, Inc.

www.linktechs.net

www.towercoverage.com

PowerLink AT2 Manual

Hardware Overview

•Power Button on Top

•48v and 24v buttons on front of unit

•LCD screen to tell you current status

•Light on top

•Power Over Ethernet LAN Port

•USB-C Charging system 2A

•USB Power Out

•Optional 5 GHz Access Point

Quick Start

•Power-On Powerlink AT2 Device

•Press the voltage you need to power your CPE

•Use a short CAT5 cable to go between the LAN port on the PowerLink AT2 and the CPE.

•Connect to www.linktechs.net SSID

•IP address should come from CPE (if you are configured for DHCP on your wireless device), or you will

need to statically configure it.

•Connect to your CPE using web/winbox or installation application.

Normally there is no need to login to the PowerLink, unless you wish to do some kind of special configuration,

things like change VLANs, SSIDs, security etc. Most of the time the unit will be completely pass-though, and

transparent bridging. Most manufacture applications prefer this.

www.LinkTechs.net

PowerLink AT2 Manual v1.2

314.735.0270

647.725.7011

636.660.1534

[email protected]

314.735.0270

647.725.7011

636.660.1534

[email protected]

8839 Oermann Road

Dittmer, MO 63023

Link Technologies, Inc.

www.linktechs.net

www.towercoverage.com

Contents

Hardware Overview ................................................................................................................................................ 1

Quick Start............................................................................................................................................................... 1

Features:............................................................................................................................................................. 3

WiFi Speed ...................................................................................................................................................... 4

Optional USB AC Stick ..................................................................................................................................... 4

Hardware ................................................................................................................................................................ 4

Top Features ....................................................................................................................................................... 4

Front Buttons/Leds ......................................................................................................................................... 4

Functions............................................................................................................................................................. 5

Top Button ...................................................................................................................................................... 5

24V / 48V Button ............................................................................................................................................ 5

Reset Button ................................................................................................................................................... 5

Yellow Battery LED Indicator .............................................................................................................................. 5

Display................................................................................................................................................................. 6

Default Configuration ......................................................................................................................................... 7

To Automate the Preperation of CPEs............................................................................................................ 7

Iperf3................................................................................................................................................................. 10

Samba3 and USB flash key........................................................................................................................ 2019

Repository:.................................................................................................................................................... 20

Upgrading Firmware ......................................................................................................................................... 20

Special Functions .......................................................................................................................................... 2221

NOTICE: Optional 5GHZ AC USB Stick.......................................................... Error! Bookmark not defined.21

Appendix:...................................................................................................................................................... 2322

Cat5 Pinout................................................................................................................................................ 2322

Cambium Cable......................................................................................................................................... 2322

V cable, for LAN speed test....................................................................................................................... 2322

www.LinkTechs.net

PowerLink AT2 Manual v1.2

314.735.0270

647.725.7011

636.660.1534

[email protected]

314.735.0270

647.725.7011

636.660.1534

[email protected]

8839 Oermann Road

Dittmer, MO 63023

Link Technologies, Inc.

www.linktechs.net

www.towercoverage.com

Features:

•1.5-inch TFT RGB display

•Passive Power Over Ethernet Device, Ubiquiti, Mikrotik, Cambium, etc.

•Switchable 24V and 48V - 30W PoE.

•Will power up 802.3at devices using 8 wires

•WiFi 2.4 GHz - Optional 5GHz AC Module

•14000mA/h for charging external devices.

•Short-circuit, Overload, Temperature, Low Output Voltage protection.

•Automated preparation of CPE antenna. Via Linux script

•OpenWrt / Lede, HTML menu, working opkg repository

•VLAN support

•Iperf3 -s always active

•Samba 3, for files and memory sharing, USB flash memory.

•Works Perfectly with Several Manufacture Apps -- EasyUBNT, Tik-App, Ubntu, Cambium

•IEEE 802.3 (Pin 4 e 5 +24V, Pin 7 e 8 GND)

•For old Cambium CPE you have to create a LAN cable with reversed power pin.

•One-year warranty.

•USB Out (Charge/LED)

•Wi-Fi

•PoE On

•Accessory:

oHard Case

oUSB Cable

oLAN Cable

o5Ghz AC module (Optional)

•280 grams

•86x103x30mm

•MT7620 chipset 2.4GHz

•Two PCB antennas.

www.LinkTechs.net

PowerLink AT2 Manual v1.2

314.735.0270

647.725.7011

636.660.1534

[email protected]

314.735.0270

647.725.7011

636.660.1534

[email protected]

8839 Oermann Road

Dittmer, MO 63023

Link Technologies, Inc.

www.linktechs.net

www.towercoverage.com

WiFi Speed (theoretical):

2.4 GHz Width 40Mhz = 86 Mbps

2.4 GHz Width 20Mhz = 43 Mbps

Optional USB AC Stick

AC 5Ghz Width 80Mhz = 292Mbps

AC 5Ghz Width 40Mhz = 150Mbps

AC 5Ghz Width 20Mhz = 72 Mbps

Hardware

Top Features

1. LAN Port

2. Reset Button

3. USB-C Power Input

4. Power Button

5. LED Light

6. USB with Power Out

Front Buttons/Leds

The Pwr led tells you if the router is powered on.

The Battery light will blink if the unit is low on charge

or charging, it will be solid if the unit is finished charging.

WiFi blink, when client are associated

Eth blink, when Ethernet are connected

www.LinkTechs.net

PowerLink AT2 Manual v1.2

314.735.0270

647.725.7011

636.660.1534

[email protected]

314.735.0270

647.725.7011

636.660.1534

[email protected]

8839 Oermann Road

Dittmer, MO 63023

Link Technologies, Inc.

www.linktechs.net

www.towercoverage.com

Functions

Top Button

This is the button on the top of the unit, next to the LAN and Power In port.

•One click –Turn on Router and WiFi Turn on AT2

•One click –Turn off Router and WiFi

•Fast Double click –Turn off AT2

•Long click button –Turn on/off LED Light

24V / 48V Button

The 24v button is Yellow in color and the 48v button is Red. Be sure your device supports 48v and/or 24v before

plugging them in. The PowerLink does not have a method to detect what voltage should be applied, therefore,

it will apply the voltage you select. Look on the screen for the current voltage output.

•One Click –Enable POE out with selected voltage and Enable WIFI

•One Click –Disable POE out and disable WIFI

•One Click at boot button –Show Test

Reset Button

The reset button is to either preform a firmware update or to factory Reset the unit. This is typically one of the

major troubleshooting steps that

•Pressed during startup –firmware update

•Pressed for 30 seconds –factory reset.

Yellow Battery LED Indicator

This indicator tells you when the unit is charging, and when it is completed charging. It also will tell you when a

low battery condition is enabled.

•While charging = Blinking LED

•End of Charge = LED ON

•In discharging = LED ON

•Low Battery = Blinking LED

www.LinkTechs.net

PowerLink AT2 Manual v1.2

314.735.0270

647.725.7011

636.660.1534

[email protected]

314.735.0270

647.725.7011

636.660.1534

[email protected]

8839 Oermann Road

Dittmer, MO 63023

Link Technologies, Inc.

www.linktechs.net

www.towercoverage.com

Timeout

If the PoE out is on and the power is lower then 2W, unit turns off after 2 minutes.

If only WiFi is on, it turn off after 15 minutes.

You can remove this timeout from configuration.

Display

The LCD displays a number of items, the battery level, Current PoE

Voltage going out the POE Ethernet port and the milli-amp draw,

as well as an ethernet status Icon. It also can tell you if your

configuration script was successfully completed or if it failed.

•Battery level

•PoE voltage

•Ethernet Status ICON

oswitched off - router off

ofull –ethernet at 100 Full Duplex

ohalf –Problems with ethernet cable

ounplg –Cable Not Plugged In

•Power delivered

•config done –When the script is successful

•config failed –When the script fails

www.LinkTechs.net

PowerLink AT2 Manual v1.2

314.735.0270

647.725.7011

636.660.1534

[email protected]

314.735.0270

647.725.7011

636.660.1534

[email protected]

8839 Oermann Road

Dittmer, MO 63023

Link Technologies, Inc.

www.linktechs.net

www.towercoverage.com

Default Configuration

To Connect to the device and change options, you can connect via web browser via http://192.168.1.69 or SSH

to the same IP address. The default

IP Address: 192.168.1.69

Username: root password: geva

To Automate the Preperation of CPEs

On the PowerLInk AT, through ssh connection:

/root/CpConf.sh daemon for CPE configuration

/root/OnCpScript.sh executed on the CPE for its configuration

/root/system.cfg copied on the CPE for its configuration

/root/icons.sh daemon that controls icon on TFT

On HTML page of router -> System -> Startup -> Local Startup

iperf -s&

/root/icons.sh &

#/root/CpConf.sh &

1. Remove comment (#) on the last line, for enable auto CPE conf.

2. Customize OnCpScript.sh for your requirement.

3. Copy your CPE configuration file, system.cfg

4. Examples work on the Ubiquiti AirOs CPE

www.LinkTechs.net

PowerLink AT2 Manual v1.2

314.735.0270

647.725.7011

636.660.1534

[email protected]

314.735.0270

647.725.7011

636.660.1534

[email protected]

8839 Oermann Road

Dittmer, MO 63023

Link Technologies, Inc.

www.linktechs.net

www.towercoverage.com

Web Interface

You can access the web interface by browsing to 192.168.1.69. The username is root and password is either

linktechs or geva.

www.LinkTechs.net

PowerLink AT2 Manual v1.2

314.735.0270

647.725.7011

636.660.1534

[email protected]

314.735.0270

647.725.7011

636.660.1534

[email protected]

8839 Oermann Road

Dittmer, MO 63023

Link Technologies, Inc.

www.linktechs.net

www.towercoverage.com

Status

The tight menu gives you the status page. This includes, overview, Firewall,

routes, logs, processes and graphing.

The Status page gives you Hardware, Firmware versions and uptime.

The network section tells

you what is in-use and

connected to the device.

www.LinkTechs.net

PowerLink AT2 Manual v1.2

314.735.0270

647.725.7011

636.660.1534

[email protected]

314.735.0270

647.725.7011

636.660.1534

[email protected]

8839 Oermann Road

Dittmer, MO 63023

Link Technologies, Inc.

www.linktechs.net

www.towercoverage.com

Interface / Bridge

Under Network →Interfaces, you have the option to configure new interfaces and/or edit the existing. The

default should be LAN, this is a br-lan bridge group.

Tabla de contenidos

Manuales populares de Accesorios para cámaras de otras marcas

Viltrox

Viltrox EF-NEX Instrucciones de instalación

Calumet

Calumet 7100 Series CK7114 Manual de usuario

Ropox

Ropox 4Single Series Manual de usuario

Cambo

Cambo Wide DS Digital Series Instrucciones de funcionamiento

Samsung

Samsung SHG-120 Manual de usuario

Ryobi

Ryobi BPL-1820 Manual de operación

Aegis

Aegis ABL-36020P Manual de usuario

Pentax

Pentax Data Back Fc Manual de usuario

Fantasea

Fantasea EyeGrabber F Series Manual de usuario

Honeywell

Honeywell HDZ20HD Manual de usuario

EGO

EGO BA1400T Manual de usuario

Sima

Sima SRW-62 Manual de usuario

Shape

Shape A7SSMKIT Manual de usuario

Slide Kamera

Slide Kamera HST-2 Manual de usuario

Power works

Power works 2902613 Manual de usuario

SES

SES SE-2047-2 Manual de usuario

Olympus

Olympus PT-EP05L Manual de usuario

Starlite

Starlite OctoDome nxt Manual de usuario