LINK-MI LM-HE04 Manual de usuario
HDMI Splitter and extender by cat5e/6 ( 1*4)
Model:LM-HE04
USER MANUAL
1、Introduction
This extender can extend and connect one HD Source to four HD Displays or Projectors
by four pieces of cat6/7 at the same time. The extending distance can reach 60m. This
extender meets the needs of multi-route and low-cost HD Signal long distance transmission
well.
The production equipment company providing solutions for the following applications:
such as noise, limited transmission distance and safety of the place, data center control,
information distribution, conference room presentations and teaching environment and
corporate training sites.
Our devices offers solutions for noise, space and security concerns, data center control,
information distribution, conference room presentation, school and corporate training
environments.
2、FEATURES
1. One HDMI input distribute and extend to found Display by four cat6/7 cable. The extend
distance can be up to 60m.
2. Support HDMI 1.3 protocol
3. HDCP 1.2 protocol compliant
4. Study EDID function，Support 3D
5. Support HDMI local output.
6. Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
7. Signal transmission: Single cat5e or cat6(recommended) cable up to 60 meters
8. Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
9. Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD.
10. Support up to 5metres AWG26 cable length between extender and source & sink device
11. No loss of quality
3、SPECIFICATIONS
Every port Length of CAT6
cable between Rx and TX
Up to 60 meters
HDMI Input
24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format input
DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
HDMI Output
24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format output
DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Max transmission bandwidth
6.75Gbps
Input Video signal
0.5~1.5Volts p-p
Output DDC signal
5Volts p-p (TTL)
Input/Output HDMI1.3 cable
distance
≤20m AWG26 HDMI 1.3 standard cable
Max working current
400mA
Power adapter format
Input: AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1 A
Operating Temperature range
(-15 to +55℃)
Operating Humidity range
5 to 90%RH (No Condensation)
Dimension TX (L x W x H)
155*105.2*25mm
Dimension RX (L x W x H)
82*69*25mm*4
Gross weight
0.7kg*4
Box Dimension(LXWXH)
250X220X60(mm)*3
4、Package Contents
Before attempting to use this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
1) Main unit No. 1 Sender
2) Main unit No. 2 Receiver
3) 5 pieces of 5V DC Power Supply.
4) User’s Manual
5、CONNECTING AND OPERATING
1. Connect one HDMI 1.3 cable up to 20 meters between source device and TX Extender.
2. Connect one HDMI 1.3 cable up to 20 meters between sink device and RX Extender
3. Connect single cat6 or cat-6(recommended) cables up to 60 meters instead of HDMI
cable between TX and RX Extender
4. Connect 5V power supply to the HDMI RX&TX Extender
5. Learning EDID, the display device connected to the TX, long press for 3 seconds EDID,
status indicator light flashing, copy is complete, (note: if there is no access to display devices,
will restore the system default EDID)
Otros manuales de Cables y conectores de LINK-MI
LINK-MI
LINK-MI LM-SPE108 Manual de usuario
LINK-MI
LINK-MI LM-SP144E-HD4K2K Manual de usuario
LINK-MI
LINK-MI LM-SP07D Manual de usuario
LINK-MI
LINK-MI MX41-4K2K Manual de usuario
LINK-MI
LINK-MI LM-SPH02-100 Manual de usuario
LINK-MI
LINK-MI LM-SPE104 Manual de usuario
LINK-MI
LINK-MI LM-DA104 Manual de usuario
LINK-MI
LINK-MI LM-SP01 Manual de usuario
LINK-MI
LINK-MI LM-SP15-4K2K Manual de usuario
LINK-MI
LINK-MI LM-SP20 Manual de usuario
