Linea Infinea Tab 4 Manual de usuario

1 DATECS

Linea TAB4

User Manual

Legal Notice

“Made for iPod,” “Made for iPhone,” and Made for iPad” mean that an

electronic accesory has been designed to connect specifically to iPod,

iPhone, or iPad, respectively, and has been certified by the developer to

meet Apple performance standards. Apple is not responsible fort he

operation of this device or its compliance with safety and regulatory

standards. Please note that the use of this accesory with iPod, iPhone, or

iPad may affect wireless performance.

Compatibility

Made for

iPad (4th generation

iPad, iPhone, iPod touch are trademarks of Apple Inc., registered in the

U.S. and other countries. Lightning is a trademark of Apple Inc.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Use shielded cables to connect this device to computers.

Any changes or modifications not expressly approved by the grantee of

this device could void the user’s authority to operate the equipment.

Overview

Features

Battery: Rechargeable Li-ion Battery - 1100 mAh,

Charging via USB to computer

Charging via Power Station

Magnetic Card Reader – 3-Track Head:

Swipe Speed: Minimum of 1.97 in/sec

MTBF: 1 million swipes

Bidirectional reading capabilities

Barcode Scanner - Class II - 1D/2D Imager:

Single / Multi-scan mode

1D - MTBF: 30K hours

(Laser Diode & Mirror Unit 10K hours

2D - MTBF: 50K hours

Indicators: Visual: 2 LEDs for device status

I/O Connectors: 9-pin Lightning connector

10-pin female Mini-B USB connector for charging

and synchronization

External RS connector

Technical Data

Processor 32-bit ARM

Cortex

- M3 based Microcontroller

Magnetic Card Reader

(option)

• 3-track bi-directional reading

• ISO 7810, 7811 and 7813

Secure Magnetic Card

Reader

(option)

• PCI PTS 3.x certified

• DUKPT and Fixed Key Management

• 3DES-112, AES-128, AES-256 encryption algorithms

RFID Card Reader

(option)

• MiFARE Mini • ISO 14443

• MiFARE Classic 1K / 4K • ISO 15693

• MiFARE Ultra-Light / Ultra-Light-C • DESFire card

• MiFARE Plus 2K / 4K • FeliCa

Barcode Reader

(option)

• Opticon MDL1000* - Laser Barcode Scan Engine

• Newland EM3070* - Image Sensor 752x480 CMOS, High Performance 2D

Imager Scan Engine

• Intermec EA-30 - Image Sensor 752x480 CMOS, High Performance 2D

Imager Scan Engine

• Opticon MDI3100 - Image Sensor 752x480 CMOS, High Performance 2D

Imager Scan Engine

Supported Barcode

Types

• 1D* Barcode Scanner Supported Symbologies

JAN/UPC/EAN incl. add on, Codabar/NW-7, Code 11, Code 39, Code 93, Code 128, GS1-

128(EAN-128 , GS1 DataBar (RSS , IATA, Industrial 2of5, Interleaved 2of5, ISBN-ISMN-

ISSN, Matrix 2of5, MSI/Plessey, S-Code, Telepen, Tri-Optic, UK/Plessey

Postal code: Chinese Post, Korean Postal Authority code

Composite codes, MicroPDF417, PDF417

• 2D* Imager Supported Symbologies

Code 128, EAN-13, EAN-8, Code 39, UPC-A, UPC-E, Codabar, Interleaved 2 of 5, ITF-6,

ITF-14, ISBN, Code 93, UCC/EAN-128, GS1 Databar, Matrix 2 of 5, Code 11, Industrial 2

of 5, Standard 2 of 5, Plessey, MSI-Plessey

PDF417, Data Matrix (ECC200, ECC000, 050, 080, 100, 140 , QR Code

Battery Rechargeable Li-Ion Battery 3.7V / 1100 mAh

Connectivity

• Apple 9 pin connector

• Pass-through sync through mini USB

• BT 2.0 Class 2 (option

- SPP - Serial Port Profile

• External serial port

Device compatibility iPad 4

Buttons 2 scan buttons

LED indication 2 LEDs for battery and device status

Audio indication Electro - Magnetic Buzzer

Weight, g 115 with battery and 2D barcode reader (without iPad

Dimensions (LxWxH),

mm 128 x 51 x 45

Environmental • Operating: -10oC to +40oC / 35 to 85% RH

• Storage: -20oC to +50oC / 10 to 90% RH

Power Supply • 5V through mini USB

• 5V through single or 5 station charger

Accessories

• Single station charger - SC-1

• 5 stations charger - GC-5

• Holster

• Stand

Table 1

* Specifications subject to change without notice.

Box Contents

Your Linea Tab comes with the following items listed below:

Item Part Number Descriptions Image

1 Linea Tab4 Linea Tab4 Reader /

Scanner

2 USB A to mini

B USB USB sync cable

3 Linea Tab

User Manual User's manual

Table 2

*Bulk Shipments may ship without cables and manuals in each box.

Getting Started

Device overview

Fig. 1

Fig. 2

The Linea Tab allows you to scan barcode and capture

Magnetic Strip information onto your iPad4. Before using your Linea

Tab the battery should be properly charged. The following Quick Start

guide will help to get your Linea Tab ready for use.

Quick Start

Step What to do Purpose Where to find more

information

Fully charge your

Linea Tab4 as

recommended.

The battery pack

should be fully

charged before use

to ensure long

battery life.

Charging Battery,

Page 9.

Install Software.

Barcode Scanning

& Card Reading

requires software

to be installed on to

your iPad4

Please contact your

distributor, Pages 11

and 12.

Attach device to

IPad4.

Connecting your

Linea Tab and

iPad4.

Page 10.

Table 3

Charging Battery

Charging the Linea Tab

The Linea Tab4 uses a Lithium-Ion rechargeable battery pack.

Before first use, the battery pack should be charged for at least (4

hours.

To prevent electrical damage to the Linea Tab4 and/or battery

pack, please use approved USB to Mini USB cables only.

Fig. 3

InfineaTAB4 can be charged from USB port or Datecs power

station. When the InfineaTAB4 is charging, green led is blinking (LED2 .

When the device is fully charged, greed led is continuously light (stop

blinking .

Charging via USB cable

(type A to mini USB , connected

to PC 5V/260mA

Tabla de contenidos

Otros manuales de Lector de código de barras de Linea

Linea

Linea Tab Mini series Manual de usuario

Linea

Linea Pro 5 Manual de usuario

Manuales populares de Lector de código de barras de otras marcas

POSMicro

POSMicro Datalogic PowerScan D7100 Manual de usuario

Marson

Marson MT780 Guía de configuración rápida

NCR

NCR RealPOS Manual de usuario

Motorola

Motorola SE3300 Guía de configuración rápida

Element

Element P130BT Manual de usuario

Motorola

Motorola Symbol LS3008 Manual de instalación y operación

Meec tools

Meec tools OBD-II / VAG Manual de usuario

SICK

SICK CLP 100 Manual de usuario

Royal Tag SA

Royal Tag SA I-Read Manual de usuario

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manual de usuario

Meteor

Meteor 8310 Manual de usuario

Denso

Denso BHT-500B Manual de usuario

Datalogic

Datalogic Heron HD3130 Manual de usuario

Motorola

Motorola MP6000 Instrucciones de montaje

Newland

Newland NLS-HR15-BT Manual de usuario

ARTDEV

ARTDEV AS-1310 Manual de usuario

Aopos

Aopos AS290 Manual de usuario

ENS

ENS 367-5455 Manual de usuario