Lincoln Electric DX7 Manual de usuario
8695 5235 / G
DX7 -1
WIRE FEED UNIT
DX7
N° W000315118 - W000315119
9109 6982 - 9109 6983
EDITION: EN Instructions for use REF. :8695 5235
REVISION: G
DATE: 11-2018 Original instructions
WIRE FEED UNIT DX7 8695 5235 / G
-2 DX7
Thank you very much for the trust you have shown by choosing this piece of
equipment. It will give you trouble-enee service if it is used and maintained as
recommended.
Its design, component specifications and manufacturing are in accordance
with applicable European directives.
Please refer to the CE declaration enclosed to identify the directives
applicable to it.
The manufacturer shall not be liable for any combination of parts not
recommended by it.
For your safety, please follow the non-limitative list of recommendations and
obligations, a large part of which are included in the Labour Code.
Please inform your supplier if you find any error in this instruction manual.
8695 5235 / GWIRE FEED UNIT DX7
DX7 -3
CONTENTS
SAFETY INSTRUCTIONS .......................................................................................................5
AIRBORNE NOISE...................................................................................................................5
DESCRIPTION.........................................................................................................................6
HEAD ORIENTATION..............................................................................................................10
USE ..........................................................................................................................................11
SPARE PARTS ........................................................................................................................12
PERSONAL NOTES ..........................................................................................................................16
WIRE FEED UNIT DX7 8695 5235 / G
-4 DX7
REVISIONS
REVISION B 08/05
DESIGNATION
PAGE
Complete update
REVISION C 05/06
DESIGNATION
PAGE
To change logos
-
REVISION D 06/07
DESIGNATION
PAGE
Reference change
11
REVISION E 10/08
DESIGNATION
PAGE
Complete update + spareparts newoffer
-
REVISION F 10/09
DESIGNATION
PAGE
Update 3A
REVISION G 11/18
DESIGNATION
PAGE
To change logos
8695 5235 / GWIRE FEED UNIT DX7
DX7 -5
SAFETY INSTRUCTIONS
For general safety instructions, please refer to the specific manual supplied with
the equipment.
AIRBORNE NOISE
Please refer to the specific manual supplied with the equipment.
Because the motor, reducing gear and plate all
have the same potential (welding +), the metal parts must not
touch the feed assembly.
WIRE FEED UNIT DX7 8695 5235 / G
-6 DX7
DESCRIPTION
VERSION DX7 3A
VERSION DX7
8695 5235 / GWIRE FEED UNIT DX7
DX7 -7
1 - FUNCTION OF DX7
The DX7 plate gear motor unit feeds electrode wire for automatic flux welding
equipment.
2 - VERSIONS
DX7
DX7 3A
4,2 m/mn
SUBMERGED
ARC
W000315118
9109 6982
15 m/mn
MIG or MAG
W000315119
9109 6983
3 - DESCRIPTION
Grease-lubricated gear motor M12 is made up of a wheel and a worm.
The gear motor unit assembly has a fixing plate (M22) with four insulated screws to
prevent arcing with the welding current.
The assembly also has two flange systems to orient the wire output in two planes in
relation to the fastening for optimised locating on the machines.
The plate has a shaft for two rollers that feed the electrode wire; the shaft may have
three rollers for two-wire applications.
The lock roller can be locked with the help of knob M6. Inlet E1 and the outlet from
the plate are symmetrical, with a ø of 18 mm. The fixing of the wire feed (A.S) or the
torch (MIG/MAG) is achieved by a tangent buffer.
Cover M17 guards the operator and can be opened with button M5.
Support tab M16 is provided to fix the powder container in the submerged arc
version.
WIRE FEED UNIT DX7 8695 5235 / G
-8 DX7
4 - SPECIFICATIONS
VERSION DX7
- Power supply voltage 42 VDC
- I average current consumption under charge 5 Amperes
- Max. current consumption max. admissible 5.5 Amperes
- Power supply cable section 2 x 2.5 mm2.
Tacho-generator 7 V/1000 rpm motor.
The motor must be powered by a MOTOVAR MV 20 variable
speed unit,
part no. 9109 6220
The feed speed range with a MOTOVAR MV 20 unit is from
0.17 to 4.20 m/mm with the W000315118 model and
0.6 to 15 m/mm with the W000315119 model.
The wire feed rollers are not part of unit DX7
8695 5235 / GWIRE FEED UNIT DX7
DX7 -9
VERSION DX7 3A
Motor Brushless 500W 48V DC
The motor must be powered by a MOTORPACK variable speed
unit,
part no. 9530 7802
The feed speed range with a MOTOVAR MV 20 unit is from
0.17 to 4.20 m/mm with the 9109 6982 model and
0.6 to 15 m/mm with the 9109 6983 model.
The wire feed rollers are not part of unit DX7
WIRE FEED UNIT DX7 8695 5235 / G
-10 DX7
HEAD ORIENTATION
The assembly can be turned along Y by unfastening the eight screws (M1)
The head can be turned along Z by unfastening the three screws (M2)
Este manual sirve para los siguientes modelos
3
Tabla de contenidos
Otros manuales de Alimentador de alambre de Lincoln Electric
Lincoln Electric
Lincoln Electric 11075 Manual de usuario
Lincoln Electric
Lincoln Electric WF 56D Manual de usuario
Lincoln Electric
Lincoln Electric Power Feed 10 Robotic K1780-2 Manual de usuario
Lincoln Electric
Lincoln Electric POWER FEED 25M NNS Manual de usuario
Lincoln Electric
Lincoln Electric Power Feed 10 Manual de usuario
Lincoln Electric
Lincoln Electric Activ8X Manual de usuario
Lincoln Electric
Lincoln Electric LF-72 Manual de usuario
Lincoln Electric
Lincoln Electric DLF-72 Manual de usuario
Lincoln Electric
Lincoln Electric PWF-2 Manual de usuario
Lincoln Electric
Lincoln Electric FLEX FEED 74 HT Manual de usuario
